COLUMN, LIGHT POLES & PROJECTORS

LUPUS Ø152 COLUMN LIGHT

LINE DRAWING

3300
250
200

250
200
Ø152
Base Plate 10mmT

DESIGN FEATURE LIGHTING DISTRIBUTION

• Lupus the most favourite lighting solutions
of Re-known Architects & Lighting Designers.

• These Fine Light Column is a great solution for

Small to Medium Size Park Areas, Mini Square Points,
and Selfie Points.

• Building Entrance Lobby and it's

internal connecting paths.

KEY CHARECTERISTICS
HOUSING AND FINISH
• Material of Construction
- Housing - High Pressure Die Cast End Caps
- Post - Steel
- Diffuser - Optical Grade Opal PC
• Ingress Protection
- Optical Compartment - IP65
• Impact Resistance(Diffuser) - IK10
• Serviceability - Optical Compartment
- Control Gear Compartment
• Colour - Graphite Grey
IP65 10KV IK 10 - Any Other RAL Colour on Request &
SPD Diffuser Confirmation

OPTICAL INFORMATION
• LED^^ - High Bright LED
Low/No
• LED CCT Initial - 3000°K ± 500°K
Maintenance • LED CRI Initial - ≥70
• LED Lifetime @ Ta 25°C # - 50000hrs - L70

APPLICATIONS ELECTRICAL INFORMATION

• Power Supply
- Power Efficiency* - ≥85%
- Power Factor* - ≥0.95
ARCHITECTURAL OUTDOOR

- Surge protection - 4KV

- Operating Input Voltage Range - 140 to 280V
- ATHD* - ≤10%
• External Surge Protection** - 10KV
Squares & Bike & Car
Pedestrian Bridges Pedestrian Parks PRODUCT INFORMATION
Areas Paths • Electrical Safety Class - I
• Rated Voltage / Frequency - 240V / 50Hz
• System Power Consumption Initial*** - 72W
• Installation Height - On Concrete Pedestal

OPERATING CONDITION
• Ambient Temperature Range - -10 to +40°C with wind effect
• Average Ambient Temperature - +25°C

ORDERING DATA
SR PRODUCT WATT CCT
NO DESCRIPTION (W) (K)
1 Lupus Ø152 CL 3000H LES2m 72w LED 30K S 72 3000

1
COLUMN, LIGHT POLES & PROJECTORS

NOTE:
- Electrical performance characteristics & data of the Product is subject to variation with wattages. Kindly confirm wattage wise electrical characteristics before placing order
- Product characteristics & data are subjected to change due to continuous improvement & modification in the product without notice or obligation and will not be liable for any
consequences resulting from the use of this publication. Reconfirm final current TDS before placing order.
- Information , description & illustrations are only indicative in nature
- (^^) LEDs used are Samsung/CREE/Nichia/Osram/Seoul/Philips/Bridgelux or equivalent
- (*) At Nominal Input Voltage
- (**) Recommended. To Be Procured Separately
- (***) The initial flux & power consumption of the luminaire are indicative values for 25°C ambient temperature. The
real flux output of the luminaire depends on environmental conditions like temperature and may very with specific configurations. Values are subject to ±10% allowance at
Nominal voltage
- All dimension are in mm are subject to tolerance ± 10mm.

TERMS, CONDITIONS & WARRANTY

· WE reserves the right to discontinue any products from its range at any time whatsoever and without prior notice.
· WE also reserves the right to make technical and photometric modifications as well as to change any
parts, details or finishes deemed suitable for improvement purposes and commercial requirements.
· The pole & product compositions shown in the catalogue are merely indicative.
· The data and information contained in these pages is to be considered indicative and non-binding WE
reserves the right to cancel, alter, or rectify the data and information for technical and technological reasons
· WE will try to do everything in its power to ensure that all the data and information herein are correct
and up-to-date when printed, yet shall not be held accountable if, regardless of various proofreads, there should
be inaccuracies or error because that are out of our control.
· Sketches are not to scale. General manufacturing tolerances are applicable to the dimensions furnished. All dimensions are in mm.
· WE warrants that their products are free from any defect in manufacturing and / or material in case of proper use.
· Products / Solutions should be used within their specifications ( e.g.Temperature, water ingress, IP rating for
indoor/outdoor installations) and according to application guidelines. Please refer to installation
guidelines available on the web page
· Warranty becomes void if the product is improperly applied and if the damage is caused by improper use or installation.
· Luminaire if subsequently modified, the persons responsible for the modification shall be considered as manufacturer.
· Fundamental failure's that will not be considered for warranty
(a) Short circuit in the input part while connecting the wires.
(b) Excess heating up of the frame due to which failure in the operation of the driver, control gear or LED.
(c) Physical damage of any components or product, due to improper handling.
· Every care is taken in packing of goods as per standard, the contains are checked twice and therefore
No claims will be entertained for breakage & shortage during transit.
· If any disputes subject to Mumbai jurisdiction only
· Denotes products with MOQs and higher Lead Times
ARCHITECTURAL OUTDOOR