0l4 Q Search document

Test L. Multiple Choice

Directions:Analyze the given test items then choose the correct answer from the options.

Write the letter of your answer on your answer sheet.

1. The arrangement of one or more complete paths of electron flow.

a. Capacitor b.Circuit c.Conductor d.Current

2. An instrument used to measure the amount of resistance in certain component of circuit.

a. Ammeter b.Ohmmeter c.Milliammeter d.Voltmeter

3. This is made out of bristles set in handle used in cleaning dirty parts of a circuit or an object.

a. Cotton b.Paint Brush c.Paper d.Rag

4. What is the appropriate tool used in driving or fastening positive slotted screws?

a.Flat b.Philips c.Slotted d.Standard

5. This can be a state of incidence occurring unexpectedly or by chance in an electronics workplace?

a. Accidental b. Detrimental c.Hazard d.Intentional

6. The reason why screw threads are stripped - off or removed partially because

a. screws are heated c.screws are over tighten

b. screws are molded d.screws are painted

7. Danilo needs this hand tool to cut metals known as

a. Hack saw b.Plier c.Screwdriver d.Utility Knife

8. In our electronics class, I was asked to hold, bend and stretch the lead of connecting wire what tool
did I used in the activity?

a. Electric Drill b.File c.File d.Wire Stripper

9. The process of identifying and repairing faults in equipment.

SCRIBD Search

1 of 4

a.Magnifying glass c. Soldering iron

14. Whenever you perform a task in the workshop, what will you used on protection that conforms with
local safety regulations and policies?

a. Permit b.Safety c.Survival d.Personal Protective

15. The correct direction or position in cutting wires.

a. Right angle b.Round c. Straight d.Vertical

16. If an OFF position is not available in the instrument, what is the resting pressure- function of the
switch?

a. 230 volts b.240 volts c.250 volts d.260 volts

17. What kind of component is resistor?

a. Combined b.Discrete c.Integrated d.Hybrid

of 4

EN

Upload

Liezl

Nor

18. Which component opposed the flow of current in an electrical circuit?

a. Capacitor b. Inductor c.Resistor d. Transistor

19. What is the value of a resistor with the following colors: brown, green, black and silver?

a. 160Ω b.150Ω c.25Ω d.15Ω

20. What is the maximum deviation if the resistors has 220Ω ± 10 % tolerance?

a. 230Ω b.242Ω c.224Ω d.236Ω

21. An instrument need to measure resistance.

25.The lowest range multiplier in an ohmmeter.

a. Ammeter
b. Ohmmeter

22. From what part of the ohmmeter do you derive resistance reading?

a. Range Multiplier

b. Ohmmeter Scale

23. Which instrument serves as 3 in 1 in measuring purpose?

a. Audio Generator

b. Oscilloscope

24. An item in the color coding scheme that allows the color-coded values to deviate to a certain

extent.

a. Multiplier

b.Body Color

a.Rx1 b.Rx10 c.Rx100 d.Rx1k

C.Voltmeter

c.Test Probes

d.Pointer

c.Signal Generator

d.VOM

c.Limitation

d.Tolerance

26.This is the type of reading scale to be used in ohmmeter.

a. Horizontal b.Linear c.Non-linear d.Vertical

D.Wattmeter

SCRIBD

Search,
E

What is Scribd? Documents

2 of 4

26.This is the type of reading scale to be used in ohmmeter.

a. Horizontal

b.Linear

c.Non-linear

d.Vertical

c. green, blue, orange, silver

d. blue, violet, yellow,silver

28.The color representing ±5% tolerance level.

d.Silver

29. The color in the color coding scheme with an equivalent of 8 in the first band.

d.Yellow

30. Which digits does the color yellow denotes on a resistor color band?

d.7

27. What is the color code for a 560k Ω resistor with *10% tolerance?

a. blue,green, orange, silver

b. green,blue, yellow,silver

a.Black

b.Gold

c.Orange

a. Brown

b.gray

c.Red
a.2

b.3

c.4

a. Danger

b.Maintenance

a. magnetic device

a. Capacitor tester

a. greater

d. little lower

31.It is method used in keeping up all tools and equipment in good condition.

c.Used

d.Storage

32.Place the instrument in a cool dry place and away from any

b.paper

c.plastic

d.synthetic

33. What measuring instrument should be given regular checked by connecting them to power line?

b.DMM

c.Oscilloscope

d.VOM

34.For current and voltage measurement, always set the function switch in the correct setting which

isa

than the expected current or voltage present in the circuit.

c.little higher

35. It is a two terminal device that conducts in only one direction

Documents

2 of 4

35. It is a two terminal device that conducts in only one direction.

a. Anode b.Diode c.Fuse d.Output

36.What is a diode circuit that converts AC to pulsating DC?

a. Output b.Primary c.Rectification d. Rectifier

37.A drawing instrument consisting of two parts namely the stock and the blade,joined together at right
angles to each other by means of screw.

a. L-Square b.Try Square c.T-Square d.Protractor

38. A drawing instrument with two legs hinged at one end and is used for drawing arcs and circles.

a. Compass b.Drafting pen c.Protractor d.Technical pen

39.This symbol represents?

a. Capacitor b. Diode c.Fuse d.Resistor

KA

40. If the Greek letter omega (Ω) appears in a schematic diagram, the component value being
represented is.

a. Capacitor

b.Transistor

c.Transformer

d.Resistor

a. coefficient letters

c.subscript letters

43.It shows the relationship between the various component group or stages in the operation of the
circuit.
d. suffix letters

42.A geometric figure usually used to represent a stage in a block diagram.

b.Hexagon

c.Pentagon

d.Rectangle

a. Block diagram c.Schematic diagram

41.The labels of capacitor C1A and C1B in a diagram are examples o

b. designated letters

a. Circle

b. Pictorial diagram d.Wiring diagram

What is Scribd? Documents

3 of 4

a. Block alagram

b. Pictorial diagram

44.It is used for covering the face.

c. scnemauc aiagram

d. Wiring diagram

a. Gloves b.Mask c.PPE d.5s

45. This is a bag/receptacle containing medicine for initial treatment of any wounds implicated to a
person.

a. Hazard b.Risk c.Injury d.First-aid kit

46.This is a safety practice and must be centralized and start from the person-in-charge.

a. Habit b.Function c.Practice d.Ways

47.The set of rules or practices intended for a safe execution of work.

a. Action Plan c.Rules and Regulations

48.The following are actions that help in the arrangement of things in a laboratory except for one.

a. Sanitize b.Send c.Sweep d.Systematized

49. Which tools are not recommended to be used in electronic work?

a. Brand new tools c.Damaged tools

b. Branded tools d. Standard tools

50.Spectacles in protecting eyes from glaze, dust and other pollutants.

a. Goggle b.Mask c.Safety shoes d.Tool kit