Refrigerator

user manual

This manual is made with 100 % recycled paper. English

imagine the possibilities

Thank you for purchasing this Samsung product.

Free Standing Appliance

DA99-02318A-12.indd 1 14. 7. 15. 11:57

 safety information
SAFETY INFORMATION Do NOT attempt.
• Before operating the appliance, please read
this manual thoroughly and retain it at a Do NOT disassemble.
safe place near the appliance for your future
reference. Do NOT touch.
• Use this appliance only for its intended
purpose as described in this instruction Follow directions carefully.
manual. This appliance is not intended for use
by persons (including children) with reduced Unplug the power plug from the
physical, sensory or mental capabilities, or wall socket.
lack of experience and knowledge, unless they Make sure the machine is grounded
have been given supervision or instruction to prevent electric shock.
concerning use of the appliance by a person
responsible for their safety. Call the contact center for help.
• This appliance can be used by children aged
from 8 years and above and persons with Note.
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they These warning signs are here to prevent
have been given supervision or instruction injury to you and others.
concerning use of the appliance in a safe way Please follow them carefully.
and understand the hazards involved. Children After reading this section, keep it in a safe
shall not play with the appliance. Cleaning place for future reference.
and user maintenance shall not be made by
children without supervision. CE Notice
• Warnings and Important Safety Instructions
This product has been determined to be in
in this manual do not cover all possible
conditions and situations that may occur. It compliance with the Low Voltage Directive(2006/95/
is your responsibility to use common sense, EC), the Electromagnetic Compatibility Directive
caution, and care when installing, maintaining, (2004/108/EC), RoHS Directive (2011/65/EU),
and operating your appliance. Commission Delegated Regulation (EU) No
• Because these following operating instructions 1060/2010 and the Eco-Design Directive(2009/125/
cover various models, the characteristics of EC) implemented by Regulation (EC) No 643/2009 of
your refrigerator may differ slightly from those
the European Union. (For products sold in European
described in this manual and not all warning
signs may be applicable. If you have any Countries only)
questions or concerns, contact your nearest
service center or find help and information
online at www.samsung.com. SEVERE WARNING SIGNS
FOR TRANSPORTATION
Important safety symbols and WARNING AND SITE
precautions : • When transporting and installing the
appliance, care should be taken to ensure
Hazards or unsafe practices that that no parts of the refrigerating circuit are
may result in severe personal damaged.
WARNING
injury or death. - Refrigerant leaking from the pipe work could
ignite or cause an eye injury. If a leak is detected,
Hazards or unsafe practices that avoid any naked flames or potential sources of
may result in minor personal ignition and air the room in which the appliance is
CAUTION
injury or property damage. standing for several minutes.
• In order to avoid the creation of a flammable

2_ safety information

DA99-02318A-12.indd Sec2:2 14. 7. 15. 11:57

 gas-air mixture if a leak in the refrigerating • The appliance must be positioned so that the
circuit occurs, the size of the room in which the plug is accessible after installation.
appliance may be sited depends on the amount
of refrigerant used.
• Never start up an appliance showing any signs • The refrigerator must be grounded.
of damage. If in doubt, consult your dealer. The - You must ground the refrigerator to
room where the refrigerator will be sited must prevent any power leakages or electric
be 1 m³ in size for every 8 g of R600a refrigerant shocks caused by current leakage from the
inside the appliance. The amount of refrigerant refrigerator.
in your particular appliance is shown on the • Never use gas pipes, telephone lines or other
identification plate inside the appliance. potential lightening rods as ground.
- Improper use of the ground plug can result in
electric shock.
SEVERE WARNING SIGNS
WARNING FOR INSTALLATION • If the power cord is damaged, have it
• Do not install the refrigerator in a damp place replaced immediately by the manufacturer
or place where it may come in contact with or its service agent.
water. • The fuse on the refrigerator must be changed by
- Deteriorated insulation of electrical parts may a qualified technician or service company.
cause an electric shock or fire. - Failing to do so may result in electric shock or
• Do not place this refrigerator in direct sunlight or personal injury.
expose to the heat from stoves, room heaters or
other appliance.
• Do not plug several appliances into the same CAUTION SIGNS FOR
multiple power board. CAUTION INSTALLATION
The refrigerator should always be plugged into
its own individual electrical which has a voltage • Keep ventilation opening in the appliance
rating that matched the rating plate. enclosure or mounting structure clear of
- This provides the best performance and also obstruction.
prevents overloading house wiring circuits, which • Allow the appliance to stand for 2 hours after
could cause a fire hazard from overheated wires. installation.
• If the wall socket is loose, do not insert the
power plug.
- There is a risk of electric shock of fire. SEVERE WARNING SIGNS
• Do not use a cord that shows cracks or abrasion
damage along its length or at either end.
WARNING FOR USING
• Do not bend the power cord excessively or • Do not insert the power plug with wet
place heavy articles on it. hands.
• Do not use aerosols near the refrigerator. • Do not store articles on the top of the appliance.
- Aerosols used near the refrigerator may cause - When you open or close the door, the articles
an explosion or fire. may fall and cause personal injury and/or material
damage.
• Do not put items filled with water on the
• This refrigerator must be properly installed refrigerator.
and located in accordance with the manual - If spilled, there is a risk of fire or electric shock.
before it is used. • Do not let children hang on the door.
• Connect the power plug in proper position with - Failure to do so may cause serious personal
the cord hanging down. injury.
- If you connect the power plug upside down, wire • Do not leave the doors of the refrigerator open
can get cut off and cause fire or electric shock. while the refrigerator is unattended and do not let
• Make sure that the power plug is not squashed children enter inside of the refrigerator.
or damaged by the back of the refrigerator. - There is a risk of children entrapment and serious
• When moving the refrigerator, be careful not to personal injury because of low temperature.
roll over or damage the power cord. • Never put fingers or other objects into the
- This constitutes a fire hazard. dispenser hole.
safety information _3

DA99-02318A-12.indd Sec2:3 14. 7. 15. 11:57

 - Failure to do so may cause personal injury or nearest service center.
material damage. - Failing to do so may result in electric or fire
• Do not store volatile or flammable hazards. Keep ventilation opening in the
substances such as benzene, thinner, appliance enclosure or mounting structure clear
alcohol, ether or LP gas in the refrigerator. of obstruction.
- The storage of any of such products may cause • If you experience difficulty when changing the
explosions. light, contact service agents.
• Do not store low temperature-sensitive • If the products equipped with LED Lamp, do
pharmaceuticals products, scientific materials or not disassemble Lamp Cover and LED Lamp by
other low temperature-sensitive products in the yourself.
refrigerator. - Please contact your service agents.
- Products that require strict temperature controls • If any dust or water is in refrigerator, pull
must not be stored in the refrigerator. out power plug and contact your Samsung
• Do not place or use electrical appliance inside Electronics service center.
the refrigerator, unless they are of a type - There is a risk of fire.
recommended by the manufacturer.
• Do not use a hair dryer to dry the inside of the
refrigerator. Do not place a lighted candle in the
refrigerator for removing bad odors.
CAUTION SIGNS FOR
- This may result in electric shock or fire. CAUTION USING
• Do not touch the inside walls of the freezer or • To get best performance of product,
products stored in the freezer with wet hands. - Do not place foods too closely in front of
- This may cause frostbite. the vents at the rear of the appliance as
• Do not use mechanical devices or any other it can obstruct free air circulation in the
means to accelerate the defrosting process, refrigerator compartment.
other than those recommended by the - Wrap the food up properly or place it in airtight
manufacturer. containers before put it into the refrigerator.
• Do not damage the refrigerant circuit. • Do not place carbonated or fizzy drinks in the
freezer compartment. Do not put bottles or glass
containers in the freezer.
• This product is intended only for the - When the contents freeze, the glass may break
storage of food in a domestic environment. and cause personal injury and property damage.
• Bottles should be stored tightly together so that • Do not change the functionality of or modify the
they do not fall out. refrigerator.
• If a gas leak is detected, avoid any naked flames - Changes or modifications may result in personal
or potential sources of ignition and air the room injury and/or property damage. Any changes or
in which the appliance is standing for several modifications performed by a 3rd party on this
minutes. completed appliance is neither covered under
• Use only the LED Lamps provided by Samsung warranty service, nor is Samsung
manufacturer or service agents. responsible for safety issues and damages that
• Children should be supervised to ensure that result from 3rd party modifications.
they do not play with and/or climb into the • Do not block air holes.
appliance. - If the air holes are blocked, especially with a plastic
bag, the refrigerator can be over cooled. If this
cooling period lasts too long, the water filter may
• Do not disassemble or repair the break and cause water leakage.
refrigerator by yourself. - Do not put any newly introduced food for
- You run risk of causing a fire, malfunction and/ freezing near to already food.
or personal injury. In case of malfunction, please • Please observe maximum storage times and
contact your service agents. expiry dates of frozen goods.
• Fill water tank, ice tray, water cubes only with
potable water.
• If the appliance generates a strange noise, • Use only the ice maker provided with the
a burning or smell or smoke, unplug the refrigerator.
power plug immediately and contact your • The water supply to this refrigerator must only be
4_ safety information

DA99-02318A-12.indd Sec2:4 14. 7. 15. 11:57

 installed/connected by a suitably qualified person local authorities in regard to the environmentally
and connect to a potable water supply only. safe disposal of this product. Ensure that none
• In order to operate the ice maker properly, water of the pipes on the back of the appliances are
pressure of 138 ~ 862 kPa(1.4~8.8 kgf/cm3) is damaged prior to disposal. The pipes shall be
required. broke in the open space.
• Do not apply strong shock or excessive force • If the appliance contains iso-butane refrigerant
onto the surface of glass. (R600a), a natural gas with high environmental
- Broken glass may result in a personal injury and/ compatibility that is, however, also combustible.
or property damage. When transporting and installing the appliance,
care should be taken to ensure that no parts of
the refrigerating circuit are damaged.
• When disposing of this product or other
CAUTION SIGNS refrigerators, remove the door/door seals, door
FOR CLEANING AND latch so that small children or animals cannot
become trapped inside. Leave the shelves in
CAUTION MAINTENANCE place so that children may not easily climb inside.
• Do not directly spray water inside or Children should be supervised to ensure that
outside the refrigerator. they do not play with the old appliance.
- There is a risk of fire or electric shock. • Please dispose of the packaging material for this
• Do not spray inflammable gas near the product in an environmentally friendly manner.
refrigerator.
- There is a risk of explosion or fire.
• Do not spray cleaning products directly on the ADDITIONAL TIPS FOR PROPER
display. USAGE
- Printed letters on the display may come off. • In the event of a power failure, call the local office
• Remove any foreign matter or dust from the of your Electricity Company and ask how long it is
power plug pins. But do not use a wet or damp going to last.
cloth when cleaning the plug, remove any foreign
- Most power failures that are corrected within
material or dust from the power plug pins.
an hour or two will not affect your refrigerator
- Otherwise there is a risk of fire or electric shock. temperatures. However, you should minimize the
• Never put fingers or other objects into the number of door openings while the power is off.
dispenser hole and ice chute.
- Should the power failure last more than 24 hours,
- It may cause personal injury or material damage. remove all frozen food.
• If keys are provided with the refrigerator, the
keys should be kept out of the reach of children
• Unplug the refrigerator before cleaning and
and not in vicinity of the appliance.
performing maintenance.
• The appliance might not operate consistently
(possibility of temperature becoming too warm
in refrigerator) when sited for an extended period
SEVERE WARNING SIGNS of time below the cold end of the range of
temperature for which the refrigerating appliance
WARNING FOR DISPOSAL is designed.
• Ensure that none of the pipes on the back • Do not store food which spoils easily at low
of the appliance are damaged prior to temperature, such as bananas, melons.
disposal. • Your appliance is frost free, which means there
• R600a or R134a is used as a refrigerant. Check is no need to manually defrost your appliance, as
the compressor label on the rear of the appliance this will be carried out automatically.
or the rating label inside the refrigerator to see • Temperature rising during the defrost can
which refrigerant is used for your refrigerator. comply with ISO requirement. But if you want
When this product contains flammable gas to prevent an undue rise in the temperature of
(Refrigerant R600a), contact your local authority the frozen food while defrosting the appliance,
in regard to safe disposal of this product. please wrap the frozen food in several layers of
Cyclopentane is used as a insulation blowing newspaper.
gas. The gases in insulation material require
• Any increase in temperature of frozen food
special disposal procedure. Please contact your
during defrosting can shorten its storage life.
safety information _5

DA99-02318A-12.indd Sec2:5 14. 7. 15. 11:57

 Saving Energy Tips - For the most efficient use of energy, please keep
the all inner fittings such as baskets, drawers,
- Install the appliance in a cool, dry room with
shelves on the position supplied by manufacturer.
adequate ventilation.
Ensure that it is not exposed to direct sunlight and
never put it near a direct source of heat (radiator, for
example).
- Never block any vents or grilles on the appliance.
This appliance is intended to be used
- Allow warm food to cool down before placing it in in household and similar applications
the appliance. such as
- Put frozen food in the refrigerator to thaw. - staff kitchen areas in shops, offices and other
You can then use the low temperatures of the working environments;
frozen products to cool food in the refrigerator.
- farm houses and by clients in hotels, motels and
- Do not keep the door of the appliance open for too
other residential type environments;
long when putting food in or taking food out.
The shorter time for which the door is open, the less - bed and breakfast type environments;
ice will form in the freezer. - catering and similar non-retail applications.
- Clean the rear of the refrigerator regularly. Dust
increases energy consumption.
- Do not set temperature colder than necessary.
- Ensure sufficient air exhaust at the refrigerator base
and at the back wall of the refrigerator.
Do not cover air vent openings.
- Allow clearance to the right, left, back and top when
installing.
This will help reduce power consumption and keep
your energy bills lower.

contents
SETTING UP YOUR SIDE-BY-SIDE REFRIGERATOR ···································7

OPERATING THE SAMSUNG SIDE-BY-SIDE REFRIGERATOR ····················16

TROUBLESHOOTING ·····················································································22

6_ safety information

DA99-02318A-12.indd Sec2:6 14. 7. 15. 11:57

 setting up your side-by-side
refrigerator

01 SETTING UP
GETTING READY TO INSTALL When moving your refrigerator
THE REFRIGERATOR To prevent floor damage be sure the front levelling
legs are in the up position (above the floor). Refer to
Congratulations on the purchase of your Samsung ‘Levelling the refrigerator’ in the manual (at page 11).
Side-By-Side Refrigerator. We hope you will enjoy the To protect the finish of the flooring, place the
many state-of-the-art features and efficiencies that protection sheet such as packing carton under the
this new appliance has to offer. refrigerator.
Selecting the best location for the
refrigerator
• Select a location with easy access to the water
supply.
• Select a location without direct exposure to
sunlight.
• Select a location with level (or nearly level) flooring. Leg
Screw Driver
• Select a location with enough space for the
refrigerator doors to open easily.
• Overall space required in use. Refer to drawing and When installing, servicing or cleaning
dimension as below. behind the refrigerator, be sure to pull the
CAUTION
• Please ensure that appliance can be moved freely unit straight out and push back in straight
in the event of maintenance & service. after finishing.

25mm

25mm
50

at least 50 mm at least 50 mm

setting up _7

DA99-02318A-12.indd Sec4:7 14. 7. 15. 11:57

 REMOVING THE REFRIGERATOR 1. With the Freezer door closed, remove the upper
hinge cover 1 using a screwdriver, and then
DOORS disconnect the wires by gently pulling them apart
2 .
If your entrance won’t allow the refrigerator to pass
easily through it, you can remove the doors.

1. Removing the Front Leg Cover 1

2
First, open both the freezer and refrigerator doors,
and then take off the front leg cover by removing the
three screws counter-clockwise.

2. Remove hinge screws 3 and the ground screw

4 by turning counter-clockwise, and take off the
upper hinge 5 . Be careful that the door does not
fall on you as you are removing it
4
3

Separating the Water Supply Line from 5

the Refrigerator
1. Remove the water line by pressing the coupler 1
and pulling the water line 2 away. 3. Next, remove the door from the lower hinge 6 by
carefully lifting the door straight up 7 .

Be careful not to pinch the water tubing and

1 wire harness on the door.

4. Remove the lower hinge 8 using a hex wrench.

2

Do not cut the water line. Gently separate it from

the coupler.

2. Removing the freezer door

A few things to mention first.
• Make sure that you lift the door straight up so the
hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire
harness on the door.
• Place doors on a protected surface to prevent
scratching or damage.

8_ setting up

DA99-02318A-12.indd Sec4:8 14. 7. 15. 11:57

 Removing the Fridge Door REATTACHING THE
1. With the door closed, remove the upper hinge REFRIGERATOR DOORS
cover 1 using a screwdriver.
Once you have safely placed your refrigerator where
you plan for it to stay, it is time to put the doors back
on.
1

Reattaching the Freezer Door

01 SETTING UP
1. Replace the freezer door by inserting the water
line 1 back into the lower corner of the door and
then into the hole on the lower hinge 2 .
Gently pull the water line back down so that it runs
2. Remove hinge screws 2 and the ground screw straight, with no kinks or bends.
3 by turning counter-clockwise, and take off the
upper hinge 4 . Be careful that the door does not
fall on you as you are removing it 1

2
2
3

2. Insert the upper hinge shaft 3 into the hole on

the corner of the freezer door 4 .
Make sure the hinge is level between the upper
3. Remove the door from the lower hinge 5 by
lifting the door straight up 6 . hinge hole 5 and the hole of the cabinet 6 and
reattach the hinge screws 7 and ground screw
8 by turning in a clockwise direction.
Reconnect the wires.
8
7

4. Remove the lower hinge 7 from the bracket 8 5 3

by gently lifting the lower hinge upwards.
6 4

3. Place the front part of the upper hinge cover 9

on the front of the upper hinge 10 and reattach
with the screw.

10

setting up _9

DA99-02318A-12.indd Sec4:9 14. 7. 15. 11:57

 Reattaching the Fridge Door Reattaching the Water Supply Line
1. Insert the lower hinge 1 back into the lower 1. Insert the water line 2 into the coupler 1 .
hinge bracket 2 .

2. Fit the hole in the corner of the fridge door 3

over the lower hinge 4 . 1

3
2

2. The Water Line must be fully Inserted to the center

of transparent coupler to prevent water leakage
from the dispenser.
4
3. Insert the clip in the install pack and check that it
holds the line firmly.

3. Insert the upper hinge shaft 5 into the hole Center of transparent
coupler
on the hinge 6 . Make sure the hinge is level
between the upper hinge hole 7 and the hole on
the top of the cabinet 8 . Then, reattach hinge
screws 9 and the ground screw 10 by turning it
in a clock wise direction. clip A (1/4”)
(6.35 mm)

Reattaching the Front Leg Cover

Before attaching the cover, check water
connector for leakage.
Replace the front leg cover by turning the three
screws clockwise, as shown in the figure.
4. Place the front part of the upper hinge cover 11
on the front of the upper hinge 12 and reattach it
with the screw.

12

11

10_ setting up

DA99-02318A-12.indd Sec4:10 14. 7. 15. 11:57

 LEVELLING THE REFRIGERATOR MAKING MINOR ADJUSTMENTS
Now that the doors are back on the refrigerator, you TO THE DOORS
will want to make sure the refrigerator is level so you Remember, a level refrigerator is necessary for getting
can then make final adjustments. If the refrigerator the doors perfectly even. If you need help, review the
is not level, it will not be possible to get the doors previous section on levelling the refrigerator.
perfectly even.
When the door of the freezer

01 SETTING UP
The front of the refrigerator is also adjustable. is higher than the fridge

When the Freezer door is lower than

the fridge
Insert a flat-blade screwdriver into a notch on the
Adjustment
Leg, turn it clockwise or counter clockwise to level part
the freezer.

In the process for adjusting both the doors is the

same. Open the doors and adjust them, one at a
time, as follows:
1. Unscrew the
nut 1 from the 3 Wrench
lower hinge until 2 Bolt
it reaches the 1
Leg Nut
upper end of the
Screw Driver bolt 2 .
When you release the nut 1 , make sure that
When the Freezer door is higher than you use the Allen wrench provided 3 to loosen
the fridge the bolt 2 in a counter-clockwise direction.
Insert a flat-blade screwdriver into a notch on the You should then be able to unscrew the nut 1
Leg, turn it clockwise or counter clockwise to level with your fingers.
the fridge.
2. Adjust the
height difference 3 Wrench
between the 2 Bolt
doors by turning
the bolt 2
clockwise
or counter clockwise .
Leg
When you turn clockwise , the door will
Screw Driver move up.

Refer to the next section for the best way to 3. After adjusting
make very minor adjustments to the doors. the doors, turn 3 Wrench
the nut 1 2 Bolt
clockwise
1 Nut
until it reaches
the lower end
of the bolt, then tighten the bolt again with the
wrench 3 to fix the nut in place 1 .
If you do not secure the nut firmly, the bolt may
release.

setting up _11

DA99-02318A-12.indd Sec4:11 14. 7. 15. 11:57

 CHECKING THE WATER 4. After connecting the water supply to the water
filter, turn your main water supply back on and
DISPENSER LINE (OPTIONAL) dispense about 1l to clear and prime the water
A water dispenser is just one of the helpful features filter.
on your new Samsung refrigerator. To help promote
better health, the Samsung water filter removes
Close Main
unwanted particles from your water. However, it Water pipe
does not sterilize or destroy microorganisms. You
will need to purchase a water purifying system to do
that. In order for the icemaker to operate properly,
water pressure of 138 ~862 kPa is required. Under
normal conditions, a 170 cc paper cup can be filled
in 10 seconds. If the refrigerator is installed in an area
with low water pressure (below 138 kPa), you can
install a booster pump to compensate for the low NO GAP
Close Main
pressure. Make sure the water storage tank inside Water pipe
the refrigerator is properly filled. To do this, press the
water dispenser lever until the water runs from the
water outlet. Connecting the water line to the
refrigerator
Water Line installation Kits are included. You can
find it in one of the freezer drawers. 1. Remove the dust cap from the water line on the
rear of the unit and fit a compression nut from the
The new hose-sets supplied with the appliance install kit.
are to be used and that old hose-sets should not 2. Remove the water pipe from the install kit and fit a
be reused. compression nut to one end.
3. Join the two pipes together using the compression
joint from the install kit ensuring that the joint is
water tight.
INSTALLING THE WATER 4. Join the other end of the install pipe to the main
DISPENSER LINE water supply and turn on the water to check for
For Interior model leaks.
Parts for water line Installation

Remove
Loosen a cap
2 Pipe connector
1 Water line fixer and screws
Water Line
from unit

No gap
Water Line
3 Water line 4 from Kit
Water Filter

Only connect the water line to a drinkable water

Connecting to the water supply line source.
1. first, shut off the main water supply line. If you have to repair or disassemble the water
2. locate the nearest cold, drinking water line. line, cut off 6.5 mm of the plastic tubing to
3. follow the Water line Installation Instructions in the make sure you get a snug, leak-free connection.
installation kit. Before being used, the leakage in these
CAUTION CAUTION places should be examined
The water line must be connected
to the cold water pipe. If it is connected
to the hot water pipe, it may cause the
purifier to malfunction.

12_ setting up

DA99-02318A-12.indd Sec4:12 14. 7. 15. 11:57

 • Samsung Warranty does not cover WATER LINE INSTALLING THE WATER
INSTALLATION.
• The cost of connection to a water supply is at the
DISPENSER LINE
customer expense, unless included in the delivery For Exterior model
charge (refer to the delivery agreement with the
seller) Parts for water line Installation
• Please contact Plumber or Authorised Installer for
the installation if needed.

01 SETTING UP
• If Water leakage occurs due to improper
installation, Please contact installer. Pipe connector

Water line fixer and screws

Water line Purifier lock-clip Purifier

Connecting to the water supply line

Connect the water pipe with coupler and tap.
1. Close the main water tap.
2. Connect coupler “A” to the tap.

CAUTION
The water line must be connected to the cold
water pipe. If it is connected to the hot water
pipe, it may cause the purifier to malfunction.

WARRANTY INFORMATION
This water line installation is not covered by the
refrigerator or ice maker manufacturer’s warranty.
Follow these instructions carefully to minimise the risk of
expensive water damage.

Note:
If the coupler does not fit on the current tap, go
the nearest authorised service dealer and purchase the
right couplers fittings.

select the location where the purifier is to

install. (Model with the purifier)
- If you wish to reassemble the water inlet and outlet
sides of the purifier during purifier installation, see
the reference illustration.
- Cut the water line attached to the purifier to the
appropriate place after measuring the distance
between the purifier and the cold water tap.

setting up _13

DA99-02318A-12.indd Sec4:13 14. 7. 15. 11:57

 COUPLER “A” Remove any residual matter inside the
purifier. (Model with the purifier)
- Open the main water tap to check whether water
is running through the water tube on the water inlet
side of the purifier.
TAP - If water does not come out through the line, check
LINE OUTLET whether the tap is open.
- Leave the tap open until clean water is running
out and any residual matter that built up during
manufacturing has been removed.
SIDE OF 90 degree
PURIFIER OUTLET SIDE
CAUTION OF PURIFIER PURIFIER
PURIFIER WATER Insert Locking Clip After
tube seated

WATER LINE
WATER

WATER INLET COUPLER

SIDE OF PURIFIER Locking Clip

Replacement Instructions
1. Shut off water supply. Attach the purifier lock-clip.
2. Note the Flow direction on the filter. - Hold the purifier lock-clip in the appropriate position
3. Insert water supply tube into the inlet side of the (under the sink for example) and fix it tightly into
filter until the tube stop. place where to screw.
FLOW DIRECTION

WATER SUPPLY PERMEAT PURIFIER LOCK-CLIP

INLET SIDE

Note : You must also ensure

that the cut is square
and not at any sort
of angle as this could
cause a leak Secure the purifier in position.
- Fix the purifier in position, as shown in the figure on
4. After inserting tube, put together the clip strongly. the right.
The Clip fix the tube. WATER TUBE

PURIFIER LOCK-CLIP

PURIFIER

5. Turn on the water and check for leaks. If leaks

occur, repeat step 1,2,3,4. If leaks persist,
discontinue use and call your supporting dealer.
6. Flush filter for 5 minutes before use.

14_ setting up

DA99-02318A-12.indd Sec4:14 14. 7. 15. 11:57

 Connect the water line to the
refrigerator. Check the amount of water supplied
- Remove the compressor cover of the refrigerator. to the ice tray.
- Connect the water line to the valve, as shown in
the figure. 1. Lift up the icemaker cover and gently pull out.
- When connected, check if there is any leakage. 2. When you press the Test button for 3 seconds,
If any, repeat the connection. the ice cube container is filled with water from the
- Reattach the compressor cover of the refrigerator. water supply tap. Check to make sure the amount

01 SETTING UP
of water is correct (see the illustration below).
WATER LINE
If the water level is too low, the ice cubes will be
CONNECTION NUT small. This is a water pressure problem from with
in the main water pipes, not the refrigerator.

INSTRUCTIONS
COMPRESSOR COVER OF
REFRIGERATOR

Secure the water line.

- Using clip ”A”, fix the water
line to the wall (the back of
refrigerator).
CLIP A Ice maker
- When the water line is
secure, make sure whether
the water line is not
WATER LINE
excessively bent, pinched or
squashed.
Feeler Arm

Removing any residual matter inside

the water supply line after installing
filter.
1. Turn ON the main water supply & turn OFF the Check the water level
valve to the water supply line. Test button
2. Run water through the dispenser until the water 2
runs clear (approx. 1L). This will clean the water
supply system and remove air from the lines.
3. Additional flushing may be required in some
households.
4. Open the refrigerator door and make sure there
are no water leaks coming from the water filter.

A newly installed water filter cartridge may cause

water to briefly spurt from the water dispenser.
This is due to air getting into the line. It should
pose no problem to operation.

setting up _15

DA99-02318A-12.indd Sec4:15 14. 7. 15. 11:57

 operating the SAMSUNG
side-by-side refrigerator
OPERATING THE REFRIGERATOR When you change the filter,
4 FILTER
USING THE CONTROL PANEL / press this button for 3
CHANGE
seconds to reset the filter
DIGITAL DISPLAY BUTTON
schedule.
COOLSELECT MODEL
If you are going on vacation
or business trip or you do not
5
1 need to use the refrigerator,
6
press the Vacation button.
2
7 When you select vacation
button for fridge compartment
3
5 VACATION off, display LED of Vacation
4 BUTTON will be on.
DISPENSER MODEL
It is strongly requested
to remove foods in the
fresh-food compartment
and do not leave the
door open when you
select Vacation function.
By pressing the Vacation
NORMAL MODEL button and the Fridge button
simultaneously for 3 seconds,
6 CHILD all buttons will be locked. The
LOCK Water dispenser lever and
FUNCTION the Ice lever will not work
either. To cancel this function,
Press these two buttons for 3
Speeds up the time needed seconds again.
to freeze products in the Press the Fridge button to
freezer. This can be helpful set the fridge to your desired
1 POWER if you need to quickly freeze 7 FRIDGE temperature.
FREEZE items that spoil easily or if the BUTTON You can set temperature
BUTTON temperature in the freezer between 1 °C and 7 °C
has warmed dramatically (For (34 °F and 45 °F).
example, if the door was left
open). When you use Power Freeze the energy
Press the Freezer button consumption of the refrigerator will increase.
to set the freezer to your Remember to turn it off when you don’t
2 FREEZER desired temperature, You can need it and return the freezer to your original
BUTTON set the temperature between temperature setting.
-14 °C (8 °F) and -25 ºC If you need to freeze large amount of food stuff,
(-14 °F). activate Power Freeze function at least 24 hours
before.
3 ICE Use this button to choose
TYPE Cubed, Crushed or to turn
BUTTON the Ice feature off.
16_ operating

DA99-02318A-12.indd 2:16 14. 7. 15. 11:57

 CONTROLLING THE USING THE ICE AND COLD
TEMPERATURE WATER DISPENSER
Press the Ice Type button to select the type of ice
CONTROLLING THE FREEZER
you want
TEMPERATURE
The freezer temperature can be set between -14 °C
(8 °F) and -25 ºC (-14 °F) to suit your particular

02 OPERATING
needs. Press the Freezer button repeatedly until the
desired temperature is shown in the temperature
display. Keep in mind that foods like ice cream may
melt at -16 ºC (4 °F).
The temperature display will move sequentially from
-14 °C (8 °F) and -25 ºC (-14 °F). When the display
reaches -14 ºC (8 °F), it will begin again at -25 ºC
(-14 °F).
Five seconds after the new temperature is set the
display will again show the actual current freezer No Ice
temperature. However, this number will change as Select this if you want to
turn off the icemaker
the Freezer adjusts to the new temperature.
The top and bottom guards in the freezer of
this model are the two star sections, so the Ice is made in cubes. When you select
temperature in two star sections are slightly “Crushed”, the icemaker grinds the ice cubes
higher than other freezer compartment. into crushed ice.

CONTROLLING THE FRIDGE Dispensing ice

TEMPERATURE
Place your glass underneath the ice outlet and push
The refrigerator temperature can be set between 7 ºC gently against the ice dispenser lever with your glass.
(46 °F) and 1 ºC (34 °F) to suit your particular Make sure the glass is in line with the dispenser to
needs. Press the Fridge button repeatedly until the prevent the ice from bouncing out.
desired temperature is shown in the temperature
display. The temperature control process for the
Fridge works just like the Freezer process. Press the Using the Water Dispenser
Fridge button to set your desired temperature. After
Place a glass underneath the water outlet and
a few seconds, the Fridge will begin tracking towards
push gently against the water dispenser lever with
the newly set temperature. This will be reflected in the
your glass. Make sure the glass is in line with the
digital display.
dispenser to prevent the water from splashing out.
The temperature of the freezer or the refrigerator
may rise from opening the doors too frequently,
or if a large amount of warm or hot food is
placed in either side.
This may cause the digital display to blink.
Once the freezer and refrigerator return to their
normal set temperatures the blinking will stop.
If the blinking continues, you may need to “reset”
the refrigerator.
Try unplugging the appliance, wait about 10
minutes and then plug back in.

operating _17

DA99-02318A-12.indd 2:17 14. 7. 15. 11:57

 • Do not put your fingers, hands or any (9) MOVING SHELF (OPTIONAL)
other unsuitable objects in the chute or
WARNING COOLSELECT ZONE DRAWER
ice-maker bucket. ( 10 )
(OPTIONAL)
- It may result in personal injury or material
damage. ( 11 ) FRUIT & VEGETABLE DRAWER
• Never put finger or any other objects in
the dispenser opening.
- It may cause injury. To get more space, you can remove the top
• Use only the ice maker provided with the freezer drawer since it does not affect thermal
refrigerator. and mechanical characteristics. A declared
• The water supply to this refrigerator must storage volume of frozen food storage
only be installed/connected by a suitably compartment is calculated with this drawer
qualified person and connect to a potable removed.
water supply only.
• In order to operate the ice maker properly,
water pressure of 138 ~ 862 kPa is
required.
USING THE COOLSELECT
• If you have a long vacation or business ZONE™ DRAWER (OPTIONAL)
CAUTION
trip and won’t use water or ice
dispensers, close the water valve.
- Otherwise, water leakage may occur. Quick Cool
• Wipe excess moisture from the inside and • You can use the Quick Cool feature with the
leave the doors open. CoolSelect ZoneTM.
- Otherwise, odor and mold may develop. • “Quick Cool” allows 1~3 canned beverages to cool
within 60 min.
• To cancel this function, press the “Quick Cool”
button again. CoolSelect ZoneTM returns to the
(5) previous temperature.
(6) • When “Quick Cool” ends, it returns to the “Cool”
temperature setting.
(7)
(1) (8)
Thaw
(8)
(2) • Drips loss and quality deterioration of meats
(9)
reduces the freshness of foods.
• After “Thaw” is selected, warm and cold air is
( 10 ) alternately supplied into the CoolSelect ZoneTM
(3)
Drawer.
( 11 )
• Depending on the weight of meat, thawing time
can be selected for 4 hrs, 6 hrs, 10 hrs, and 12 hrs
(4)
sequentially.
• When “Thaw” ends, CoolSelect ZoneTM display
returns to “Zero Zone” condition.
• When “Thaw “ ends, there are no juice in the meats
and they are half-freezed condition so it is easy to
(1) ICE CHUTE
cut them for cooking.
(2) SHELVES
• To cancel this option, press any button except
(3) DOOR BINS “Thaw”.
(4) DRAWERS • The approximate thawing time of meat and fish are
(5) DAIRY BIN shown below. (Based on 1inch thickness)
(6) WINE SHELF (OPTIONAL)
(7) EGG TRAY
(8) SHELF (OPTIONAL)

18_ operating

DA99-02318A-12.indd 2:18 14. 7. 15. 11:57

 THAW TIME WEIGHT REMOVING THE FREEZER
4 hours 363 g (0.8 Ib) ACCESSORIES
6 hours 590 g (1.3 Ib) Cleaning and rearranging the interior of the freezer is
simple.
10 hours 771 g (1.7 Ib)
12 hours 1000 g (2.2 Ib) 1. Remove the Glass shelf by pulling the shelf out as
far as it will go. Then, gently lift it up and remove it.

02 OPERATING
Depending on the size and thickness of meat
and fish, the thawing time may vary.
The above weight represents the total weight of
food in the CoolSelect ZoneTM Drawer.
Ex) The total thawing time for 400g frozen beef
and 600g frozen chicken will be 10 hours.

With the “Thaw” option, food which is not 2. Remove the door bin by holding the door bin with
WARNING needed to thaw in the CoolSelect ZoneTM both hands and then gently lift it up.
Drawer should be removed.

Zero Zone (0ºC)

• When “Zero Zone” is chosen, the temperature
of the CoolSelect ZoneTM Drawer is kept at 0 ºC
regardless of the set refrigerator temperature.
• “Zero Zone” temperature helps keep meat or fish
fresh longer. 3. Remove the Plastic drawer by pulling it out and
slightly lifting it up.
Cool
• When “Cool” is chosen, the temperature will be the
same as the set temperature of the refrigerator. The
digital panel shows the same temperature as that of
the display panel.
• The CoolSelect ZoneTM Drawer allows extra
refrigerator space.

Depending on the beverages, the cool-down 4. Remove the Icemaker bucket by lifting up and
time may vary. pulling it out.

For “Quick Cool” option, food stored in

WARNING
the CoolSelect ZoneTM Drawer should be
removed.

Do not use excessive force when removing the

cover.
Otherwise, the cover may break and cause
injury.

operating _19

DA99-02318A-12.indd 2:19 14. 7. 15. 11:57

 REMOVING THE FRIDGE Before removing any accessories, make sure that
no food is in the way.
ACCESSORIES When possible, remove the food altogether to
1. Remove the spill Proof Glass Shelf by pulling the reduce the risk of accidents.
shelf out as far as it will go. Then, gently lift it up
and gently remove it.

CLEANING THE REFRIGERATOR

Do not use benzene, thinner, or Clorox,
Chloride for cleaning.
WARNING
They may damage the surface of the
appliance and may cause a fire.

Do not spray the refrigerator with water

while it is plugged in, as it may cause an
CAUTION
2. Remove the Vegetable & Fruit Drawer by electric shock.
pressing on the indentations found on the inside Do not clean the refrigerator with benzene,
left and right sides of the Veggie Box/Dry Box thinner or car detergent for risk of fire.
cover and remove by
pulling forward.
Holding the drawer REPLACING THE INTERIOR
with one hand, lift it up
a little bit while pulling
LIGHT
it forward and take it
out of the refrigerator. For LED lamp, please contact service engineer
to replace it.

3. Remove the Gallon Door Bin by holding the bin

with both hands and gently lifting it up.

4. The Z Shelf is attached to the cabinet wall.

Remove the wine shelf by sliding it up and gently
lifting the shelf out of the tabs.
Ensure that the Z Shelf is fitted as shown in
CAUTION
the diagram and not upside down.

20_ operating

DA99-02318A-12.indd 2:20 14. 7. 15. 11:57

 CHANGING THE WATER FILTER 6. Once you have completed this process, hold the
Ice Type button for 3 seconds to reset the filter
To reduce risk of water damage to your schedule.
property DO NOT use generic brands of 7. Lastly, Dispense 1L of water through water
WARNING
water filers in your SAMSUNG Refrigerator. dispenser and throw away. Make sure that water
USE ONLY SAMSUNG BRAND WATER
flows clearly again before drinking.
FILTERS. SAMSUNG will not be legally
responsible for any damage, including, but

02 OPERATING
not limited to property damage caused by
water leakage from use of a generic water
filter.
SAMSUNG Refrigerators are designed to
work ONLY WITH SAMSUNG Water Filter.
The “Filter Indicator” light lets you know when it is
time to change your water filter cartridge.
When the filter indicator light changes to red, it is time A newly installed water filter cartridge may
to change the filter. cause water to briefly spurt from the water
To give you some time to get a new filter, the light will dispenser. This is due to air getting into the line.
come on up just before the capacity of the current It should pose no problem to operation.
filter runs out.
Changing the filter on time provides you with the
Ordering replacement filters
freshest, cleanest water from your fridge.
To order more water filter cartridges, contact your
1. Remove the water filter from the box and
authorised Samsung dealer.
put a month indicator sticker on the filter as
shown.
2. Place a sticker on the filter that dates six
months in the future. For example, if you USING THE DOORS
are replacing the water filter in March, put
The refrigerator doors are equipped with a door
the “SEP” (September) sticker on the filter
opening and closing feature that ensures that the
to remind you to replace in September.
doors close all the way and are securely sealed.
Normally filter life is about every 6 months.
After opening beyond a certain point, the door will
3. Next, remove the fixed cap by turning it
“catch” and remain open. When the door is ajar
counter clockwise.
ahead of the catch that allows it to stay open, it will
4. Remove the new filter’s protective cap and
close automatically.
remove the old filter.
5. Position and insert the new filter into the filter
housing.
Slowly turn the water filter clockwise 90º to
align with the indication mark on the cover,
locking the filter in position. Make sure
that the indicator is lined up with the “lock”
position. Do not over tighten.

Cover filter

2
4

Sticker
(month 3
indicator) Align the
indication
5 mark with
lock position

operating _21

DA99-02318A-12.indd 2:21 14. 7. 15. 11:57

 troubleshooting
PROBLEM SOLUTION
The refrigerator • Check that the power plug is properly connected.
does not work at all • Is the temperature control on the display panel set to the correct
or it does not chill temperature? Try setting it to a lower temperature.
sufficiently. • Is the refrigerator in direct sunlight or located too near a heat source?
• Is the back of the refrigerator too close to the wall and therefore keeping air
from circulating?
The food in the fridge is • Is the temperature control on the display panel set to the correct
frozen. temperature? Try setting it to a warmer temperature.
• Is the temperature in the room very low?
• Did you store the food with a high water content in the coldest part of the
fridge? Try moving those items into the body of the fridge instead of keeping
them in the CoolSelect Zone™ drawer.
You hear unusual • Check that the refrigerator is level and stable.
noises or sounds. • Is the back of the refrigerator too close to the wall and therefore keeping air
from circulating?
• Was anything dropped behind or under the refrigerator?
• A “ticking” sound is heard from inside the refrigerator. This is normal and
occurs because various accessories are contracting or expanding in relation
to the temperature of the refrigerator interior.
The front corners of • Some heat is normal as anti-condensators are installed in the front corners
the appliance are hot of the refrigerator to prevent condensation.
and condensation is • Is the refrigerator door ajar? Condensation can occur when you leave the
occurring. door open for a long time.
Ice is not dispensing. • Did you wait for 12 hours after installation of the water supply line before
making ice?
• Is the water line connected and the shut-off valve open?
• Did you manually stop the ice making function? Make sure Ice Type is set to
Cubed or Crushed.
• Is there any ice blocked within the ice maker bucket?
• Is the freezer temperature too warm? Try setting the freezer temperature
lower.
You can hear water
• This is normal. The bubbling comes from the refrigerant coolant liquid
bubbling in the
circulating through the refrigerator.
refrigerator.
There is a bad smell in • Has a food item spoiled?
the refrigerator. • Make sure that strong smelling food (for example, fish) is wrapped so that it
is airtight.
• Clean out your freezer periodically and throw away any spoiled or suspect
food.
Frost forms on the • Is the air vent blocked? Remove any obstructions so air can circulate freely.
walls of the freezer. • Allow sufficient space between the foods stored for efficient air circulation.
• Is the freezer door closed properly?
Water dispenser is not • Is the water line connected and the shut-off valve open?
functioning. • Has the water supply line tubing been crushed or kinked?
Make sure the tubing is free and clear of any obstruction.
• Is the water tank frozen because the refrigerator temperature is too low?
Try selecting a warmer setting on the main display panel.

22_ troubleshooting

DA99-02318A-12.indd 3:22 14. 7. 15. 11:58

 memo

DA99-02318A-12.indd 3:23 14. 7. 15. 11:58

 Ambient Room Temperature Limits
This refrigerator is designed to operate in ambient temperatures specified by its temperature class
marked on the rating plate.
Ambient Temperature range (°C)
Class Symbol
IEC 62552 (ISO 15502) ISO 8561
Extended Temperate SN +10 to +32 +10 to +32
Temperate N +16 to +32 +16 to +32
Subtropical ST +16 to +38 +18 to +38
Tropical T +16 to +43 +18 to +43

Internal temperatures may be affected by such factors as the location of the refrigerator,
ambient temperature and the frequency with which you open the door. Adjust the temperature as
required to compensate for these factors.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
English (Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with
other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
COUNTRY CALL Web site
AUSTRIA 0800 - SAMSUNG (0800 - 7267864) www.samsung.com/at/support
Bogotá 600 12 72
COLOMBIA Gratis desde cualquier parte del país 01 8000 112 www.samsung.com/co/support
112 ó desde su celular #SAM(726)
EIRE 0818 717100 www.samsung.com/ie/support
www.samsung.com/hk/support (Chinese)
HONG KONG (852) 3698-4698
www.samsung.com/hk_en/support (English)
1800 3000 8282 - Toll Free
INDIA www.samsung.com/in/support
1800 266 8282 - Toll Free
1800-88-9999
MALAYSIA www.samsung.com/my/support
603-77137477 (Overseas contact)
NEW ZEALAND 0800 726 786 www.samsung.com/nz/support
800-7267 www.samsung.com/latin/support (Spanish)
PANAMA
800-0101 www.samsung.com/latin_en/support (English)
1-800-10-7267864 [PLDT]
PHILIPPINES 1-800-8-7267864 [Globe landline and Mobile] www.samsung.com/ph/support
02-4222111 [Other landline]
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com/sg/support
SOUTH AFRICA 0860 SAMSUNG (726 7864) www.samsung.com/support
UK 0330 SAMSUNG (7267864) www.samsung.com/uk/support

This product is RoHS compliant

DA99-02318A-12

DA99-02318A-12.indd 3:24 14. 7. 15. 11:58