Bid Number/बोली मांक ( बड सं या) :

GEM/2025/B/5953634
Dated/ दनांक : 05-03-2025

Bid Document/ बड द तावेज़

Bid Details/ बड ववरण

Bid End Date/Time/ बड बंद होने क तार ख/समय 26-03-2025 11:00:00

Bid Opening Date/Time/ बड खुलने क

26-03-2025 11:30:00
तार ख/समय

Bid Offer Validity (From End Date)/ बड पेशकश

180 (Days)
वैधता (बंद होने क तार ख से)

Ministry/State Name/मं ालय/रा य का नाम Ministry Of Civil Aviation

Department Name/ वभाग का नाम Airports Authority Of India (aai)

Ans,finance,hr,engineering,tech,ops,commercial,general
Organisation Name/संगठन का नाम
Store,it

Office Name/कायालय का नाम Rcdu Airports Authority Of India

े ता ईमेल/Buyer Email buycon173.afheti.dl@gembuyer.in

Total Quantity/कुल मा ा 194

Computers , Network Switch , 8 Port KVM , LCD KVM Switch ,

High Intensity LCD Monitor , LCD Monitor , NTP Server ,
Item Category/मद केटे गर
Registered RAM , Cooling Fan , SMPS , Hard Disk Drive SAS
, Keyboard , Mouse

Computer with Installed full-size PICMG 1.3 SBC board,

Network Switch Model equivalent to DGS-3420-28TC, 8 Port
KVM Model equivalent to CS1308 , LCD KVM Switch Model
equivalent to CL5708N , High Intensity LCD Monitor Model
GeMARPTS म खोजी गई ं ग / Searched equivalent to YCHR1900, LCD Monitor 21"- 22", LCD, VGA ,
Strings used in GeMARPTS NTP Server with Time Input Source: Global Navigation
Satellite, Registered RAM Compatible to Dell R730 , Cooling
Fan Model equivalent to 7N6M2-A00, SMPS Model
equivalent to D495E-S1 , Hard Disk Drive SAS Model
equivalent to ST600MM0088, Keyboard, Mouse

Searched String: Computer with Installed full-size PICMG

1.3 SBC board

Category not available on GeM for the text string uploaded

by the buyer

Searched String: Network Switch Model equivalent to

DGS-3420-28TC

Category not available on GeM for the text string uploaded

by the buyer

Searched String: 8 Port KVM Model equivalent to CS1308

KVM Switch

1 / 19
 Searched String: LCD KVM Switch Model equivalent to
Bid Details/ बड ववरण
CL5708N

IP Based KVM Switch, modular electrical switches and

accessories

Searched String: High Intensity LCD Monitor Model

equivalent to YCHR1900

Category not available on GeM for the text string uploaded

by the buyer

Searched String: LCD Monitor 21"- 22", LCD, VGA

Liquid Crystal Display LCD Panel or Monitors, Multipara

Monitor - Low End, Computer Monitor, D and C Set, HF RFID
Integrated Reader, Cardiac Monitor with defibrillator,
Upright Bike, Portable Ultrasound Machine, Blood collection
monitor, Anaesthesia Workstation

Searched String: NTP Server with Time Input Source:

Global Navigation Satellite

Satellite Navigation System Based Time Sync NTP Server

Searched String: Registered RAM Compatible to Dell R730

GeMARPTS म खोजा गया प रणाम / Searched
Category not available on GeM for the text string uploaded
Result generated in GeMARPTS by the buyer

Searched String: Cooling Fan Model equivalent to 7N6M2-

A00

Electric Axial Flow Fans Conforming To IS 3588, modular

electrical switches and accessories, Fan Blades for Cooling
Tower fan Rev 1, Classroom Stools, Industrial Cooling Fan
(Man Coolers) as per IS 6272, Split Air Conditioner Including
Green AC, Wall Mount Type (V2), Enamel, Synthetic,
Exterior (A) Under Coating (B) Finishing Paint (V3)
Confirming to IS 2932, Plain Copier Paper (V3) ISI Marked to
IS 14490, tent arctic camping and outdoor equipment,
Battery Charger, Heavy Duty

Searched String: SMPS Model equivalent to D495E-S1

Ophthalmic auto refractometer, DRDO Design Bio - Digester

Tank for Single Pan Bio Toilet, Digital Trainer Kit

Searched String: Hard Disk Drive SAS Model equivalent to

ST600MM0088

Hard disk drives

Searched String: Keyboard

Keyboard Trays (V2), Executive Table (V3), Braille Keyboard

and Display, Cartridge Check Valve, Keyboard and Mouse
Combo, Steam Sterlizer (V2), Adjustable Monitor Mount with
Adjustable Keyboard Workstation, Keyboard for Personal
Computers (V2) as per IS 14441, Steam Sterlizer, Drip - Leg
Drain

Searched String: Mouse

Mouse Pad, computer mouse or trackballs, Mouse Trap (V2),

Keyboard and Mouse Combo, Drip - Leg Drain, Cap FS
Disruptive (JSS), Random Access Memory (RAM) Card (V2),
D and C Set, Regulators for Breathing Apparatus ( Diving

2 / 19
 Instruments or Accessories)
Bid Details/ बड ववरण

Computer Monitor
अिधसूचना के िलए चयिनत ासंिगक े णयाँ / Relevant
High End Desktop Computer
Categories selected for notification Network Switch - L 3 for Cloud

Procurement of computer high intensity LCD monitor KVM

BOQ Title/बीओ यू शीषक
switch NTP server for SISTEK ATIS

Minimum Average Annual Turnover of the

bidder (For 3 Years)/ बडर का यूनतम औसत 70 Lakh (s)
वा षक टनओवर (3 वष का)

OEM Average Turnover (Last 3 Years)/मूल

70 Lakh (s)
उपकरण िनमाता का औसत टनओवर (गत 3 वष का)

Years of Past Experience Required for

same/similar service/उ ह ं/समान सेवाओं के िलए 3 Year (s)
अपे त वगत अनुभव के वष

MSE Exemption for Years Of

Experience/अनुभव के वष से एमएसई छूट/ and Yes
Turnover/टनओवर के िलए एमएसई को छूट ा है

Startup Exemption for Years Of

Experience/अनुभव के वष से टाटअप छूट/ and Yes
Turnover/ टनओवर के िलए टाटअप को छूट ा है

Experience Criteria,Past Performance,Bidder

Turnover,Certificate (Requested in ATC),OEM Authorization
Certificate,OEM Annual Turnover,Additional Doc 1
(Requested in ATC),Additional Doc 2 (Requested in
Document required from seller/ व े ता से मांगे ATC),Additional Doc 3 (Requested in ATC),Additional Doc 4
(Requested in ATC),Compliance of BoQ specification and
गए द तावेज़ supporting document
*In case any bidder is seeking exemption from Experience /
Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer

Do you want to show documents uploaded

by bidders to all bidders participated in Yes
bid?/

Past Performance/ वगत दशन 30 %

Bid to RA enabled/ बड से रवस नीलामी स य कया Yes

RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders

ITC available to buyer/ े ता के िलए उपल ध

Yes
आईट सी

Type of Bid/ बड का कार Two Packet Bid

Primary product category Computers

Time allowed for Technical Clarifications

during technical evaluation/तकनीक मू यांकन के 5 Days
दौरान तकनीक प ीकरण हे तु अनुमत समय

3 / 19
 Bid Details/ बड ववरण

Inspection Required (By Empanelled

Inspection Authority / Agencies pre- No
registered with GeM)

Payments shall be made to the Seller within 60 days of

issue of consignee receipt-cum-acceptance certificate
Payment Timelines (CRAC) and on-line submission of bills (This is in
supersession of 10 days time as provided in clause 12 of
GeM GTC)

Evaluation Method/मू यांकन प ित Total value wise evaluation

Arbitration Clause No

Mediation Clause No

EMD Detail/ईएमड ववरण

Advisory Bank/एडवाईजर बक State Bank of India

EMD Amount/ईएमड रािश 465000

ePBG Detail/ईपीबीजी ववरण

Advisory Bank/एडवाइजर बक State Bank of India

ePBG Percentage(%)/ईपीबीजी ितशत (%) 5.00

Duration of ePBG required (Months)/ईपीबीजी क

19
अपे त अविध (मह ने).

(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this
Policy./जेम क शत के अनुसार ईएमड छूट के इ छुक बडर को संबंिधत केटे गर के िलए बड के साथ वैध समिथत द तावेज़ तुत करने है ।
एमएसई केटे गर के अंतगत केवल व तुओं के िलए विनमाता तथा सेवाओं के िलए सेवा दाता ईएमड से छूट के पा ह। यापा रय को इस नीित के
दायरे से बाहर रखा गया है ।

(b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable./ईएमड और संपादन
जमानत रािश, जहां यह लागू होती है , लाभाथ के प म होनी चा हए।

Beneficiary/लाभाथ :
The Chairman
Rajiv Gandhi Bhawan, Safdarjung Airport, New Delhi, Delhi 110003
(Airport Authority Of India)

MII Purchase Preference/एमआईआई खर द वर यता

MII Purchase Preference/एमआईआई खर द वर यता Yes

4 / 19
MSE Purchase Preference/एमएसई खर द वर यता

MSE Purchase Preference/एमएसई खर द वर यता Yes

1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be
exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of
quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the
"OEM Average Turnover" criteria also subject to meeting of quality and technical specifications. In case any
bidder is seeking exemption from Turnover / Experience Criteria, the supporting documents to prove his eligibility
for exemption must be uploaded for evaluation by the buyer.
2. If the bidder is a Startup, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and
"Experience Criteria" subject to their meeting of quality and technical specifications. If the bidder is OEM of the
offered products, it would be exempted from the "OEM Average Turnover" criteria also subject to meeting of
quality and technical specifications. In case any bidder is seeking exemption from Turnover / Experience Criteria,
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer.
3. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
4. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU for number of Financial years as indicated above in the bid document
before the bid opening date. Copies of relevant contracts to be submitted along with bid in support of having
supplied some quantity during each of the Financial year. In case of bunch bids, the category of primary product
having highest value should meet this criterion.
5. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period
shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old,
the average turnover in respect of the completed financial years after the date of constitution shall be taken into
account for this criteria.
6. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier
as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its
subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum
local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the
Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local
content and the details of locations at which the local value addition is made along with their bid, failing which
no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating
to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company
and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public
Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers
as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are
not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .The
buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023.
OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy
for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017.

7. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are
validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small
Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and
its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the
Purchase preference, the bidder must be the manufacturer / OEM of the offered product on GeM. Traders are
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers
offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in
this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide
eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is

5 / 19
not an MSE and MSE Seller (s) has / have quoted price within L-1+ 15% (Selected by Buyer) of margin of
purchase preference /price band defined in relevant policy, such MSE Seller shall be given opportunity to match
L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are
advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for
compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012
and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is
validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents
submitted.
8. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.
9. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 30% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU. Copies of relevant contracts (proving supply of
cumulative order quantity in any one financial year) to be submitted along with bid in support of quantity
supplied in the relevant Financial year. In case of bunch bids, the category related to primary product having
highest bid value should meet this criterion.

10. Reverse Auction would be conducted amongst first 50% of the technically qualified bidders arranged in the
order of prices from lowest to highest. Number of sellers eligible for participating in RA would be rounded off to
next higher integer value if number of technically qualified bidders is odd (e.g. if 7 bids are technically qualified,
then RA will be conducted amongst L-1 to L-4). In case number of technically qualified bidders are 2 or 3, RA will
be between all without any elimination. If Buyer has chosen to split the bid amongst N sellers, then minimum N
sellers would be taken to RA round. In case Primary products of only one OEM are left in contention for
participation in RA based on lowest 50% bidders qualifying for RA, the number of sellers qualifying for RA would
be increased to get at least products of one more OEM (directly participated or through its reseller) if available.
Further, if bid(s) of any seller(s) eligible for MSE preference is / are coming within price band of 15% of Non MSE
L-1 or if bid of any seller(s) eligible for Make in India preference is / are coming within price band of 20% of non
MII L-1, then such MSE / Make in India seller shall also be allowed to participate in the RA process.

If the buyer has mentioned MSE purchase preference in ATC then service provider is required to upload
necessary documents for MSE purchase preference for verification by the buyer during evaluation.

Computers
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

6 / 19
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 21 90
Delhi

Network Switch
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 9 90
Delhi

8 Port KVM
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

7 / 19
Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 5 90
Delhi

LCD KVM Switch

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

8 / 19
 ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 5 90
Delhi

High Intensity LCD Monitor

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 5 90
Delhi

9 / 19
LCD Monitor
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 4 90
Delhi

NTP Server
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

10 / 19
Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 5 90
Delhi

Registered RAM
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

11 / 19
 Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 30 90
Delhi

Cooling Fan
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 30 90
Delhi

SMPS
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

12 / 19
 Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 40 90
Delhi

Hard Disk Drive SAS

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

13 / 19
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 30 90
Delhi

Keyboard
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 5 90
Delhi

Mouse
(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

14 / 19
Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Input Tax Credit(ITC)/इनपुट कर े डट(आईट सी) and/ तथा Reverse Charge(RCM)/ रवस भार (आरसीएम) Details

ITC on GST/जीएसट पर इनपुट कर े डट ITC on GST Cess/जीएसट उपकर कर े डट

100% NA

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

110003,o/o Executive Director,

1 Sabita Kumari RCDU, Safdarjung Airport, New 5 90
Delhi

Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत

1. Generic

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at
the contracted rates. The delivery period of quantity shall commence from the last date of original
delivery order and in cases where option clause is exercised during the extended delivery period the
additional time shall commence from the last date of extended delivery period. The additional delivery
time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to
minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the
original delivery period. The Purchaser may extend this calculated delivery duration up to the original
delivery period while exercising the option clause. Bidders must comply with these terms.

2. Generic

While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the
screenshot of GST portal confirming payment of GST.

3. Scope of Supply

15 / 19
 Scope of supply (Bid price to include all cost components) : Only supply of Goods

4. Generic

Bidder financial standing: The bidder should not be under liquidation, court receivership or similar
proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.

5. Generic

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any
responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates
(whichever is lower), subject to the maximum of quoted GST %.

6. Generic

Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly,
manufactured and supplied same or similar Category Products to any Central / State Govt Organization /
PSU for 3 years before the bid opening date. Copies of relevant contracts to be submitted along with bid
in support of having supplied some quantity during each of the year. In case of bunch bids, the primary
product having highest value should meet this criterion.

7. Generic

Manufacturer Authorization:Wherever Authorised Distributors/service providers are submitting the

bid, Authorisation Form /Certificate with OEM/Original Service Provider details such as name, designation,
address, e-mail Id and Phone No. required to be furnished along with the bid

8. Turnover

Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last
three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the
relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
bidder is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria.

9. Turnover

OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in
the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant
periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for
the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
OEM is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria. In case of bunch bids, the OEM of
CATEGORY RELATED TO primary product having highest bid value should meet this criterion.

10. OEM

IMPORTED PRODUCTS: In case of imported products, OEM or Authorized Seller of OEM should have a
registered office in India to provide after sales service support in India. The certificate to this effect should
be submitted.

11. Purchase Preference (Centre)

Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated
23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent
Orders/Notifications issued by concerned Ministry. If the bidder wants to avail the Purchase preference,
the bidder must be the manufacturer of the offered product in case of bid for supply of goods. Traders are
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary

16 / 19
 evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. If
L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% of margin of purchase
preference /price band defined in relevant policy, such Seller shall be given opportunity to match L-1
price and contract will be awarded for percentage of 25% of total value.

12. Purchase Preference (Centre)

Purchase Preference linked with Local Content (PP-LC) Policy:

The bid clause regarding “Preference to Make In India products” stands modified in this bid and shall be
governed by the PPLC Policy No. FP-20013/2/2017-FP-PNG dated 17.11.2020 issued by MoP&NG as
amended up to date. Accordingly, bidders with Local Content less than or equal to 20% will be treated as
“Non Local Supplier”. The prescribed LC shall be applicable on the date of Bid opening. Sanctions on the
bidders for false / wrong declaration or not fulfilling the Local Content requirement shall be as per the PPLC
policy. Further following additional provisions are added in the certification and verification of local content
provision of the Preference to Make in India clause:

i. In case of foreign bidder, certificate from the statutory auditor or cost auditor of their own office or
subsidiary in India giving the percentage of local content is also acceptable. In case office or
subsidiary in India does not exist or Indian office/subsidiary is not required to appoint statutory
auditor or cost auditor, certificate from practicing cost accountant or practicing chartered
accountant giving the percentage of local content is also acceptable.
ii. Along with Each Invoice: The local content certificate (issued by statutory auditor on behalf of
procuring company) shall be submitted along with each invoice raised. However, the % of local
content may vary with each invoice while maintaining the overall % of local content for the total
work/purchase of the pro-rata local content requirement. In case, it is not satisfied cumulatively in
the invoices raised up to that stage, the supplier shall indicate how the local content requirement
would be met in the subsequent stages.
iii. The bidder shall submit an undertaking from the authorized signatory of bidder having the Power of
Attorney along with the bid stating the bidder meets the mandatory minimum LC requirement and
such undertaking shall become a part of the contract.

13. Service & Support

Availability of Service Centres: Bidder/OEM must have a Functional Service Centre in the State of each
Consignee's Location in case of carry-in warranty. (Not applicable in case of goods having on-site
warranty). If service center is not already there at the time of bidding, successful bidder / OEM shall have
to establish one within 30 days of award of contract. Payment shall be released only after submission of
documentary evidence of having Functional Service Centre.

14. Inspection

Pre-dispatch inspection at Seller premises (Fee/Charges to be borne by the BUYER): Before

dispatch, the goods will be inspected by Buyer / Consignee or their Authorized Representative or by
Nominated External Inspection Agency (independently or jointly with Buyer or Consignee as decided by
the Buyer) at Seller premises (or at designated place for inspection as declared / communicated by the
seller) for their compliance to the contract specifications. Fee/Charges taken by the External inspection
Agency and any external laboratories testing charges shall be borne by the Buyer. For in-house testing,
the Sellers will provide necessary facilities free of cost. Seller shall notify the Buyer through e-mail about
readiness of goods for pre-dispatch inspection and Buyer will notify the Seller about the Authorized
Representative/ Nominated External Inspection Agency and the date for testing. The goods would be
dispatched to consignee only after clearance in pre-dispatch inspection. Consignee's right of rejection as
per GTC in respect of the goods finally received at his location shall in no way be limited or waived by
reason of the goods having previously been inspected, tested and passed by Buyer/ Consignee or its
Nominated External Inspection Agency prior to the goods' shipment. While bidding, the sellers should take
into account 7 days for inspection from the date of email offering the goods for inspection. Any delay in
inspection beyond 7 days shall be on the part of the buyer and shall be regularised without Liquidated
Damages.
When there is requirement of submission the advance sample, the seller shall inform the buyer promptly
through emails about the date of submission of sample to the buyer nominated Inspection agency.

15. Forms of EMD and PBG

17 / 19
 Bidders can also submit the EMD with Payment online through RTGS / internet banking in Beneficiary
name

Airports Authority of India

Account No.
33809419622
IFSC Code
SBIN0017180
Bank Name
State Bank of India
Branch address
Rajiv Gandhi Bhawan, New Delhi-110003
.
Bidder to indicate bid number and name of bidding entity in the transaction details field at the time of on-
line transfer. Bidder has to upload scanned copy / proof of the Online Payment Transfer along with bid.

16. Past Project Experience

The Bidder / OEM {themselves or through reseller(s)}, should have executed project for supply and
installation / commissioning of same or similar Category Products during preceding 3 financial years (i.e.
current year and three previous financial years) as on opening of bid, as per following criteria:

(i) Single order of at least 35% of estimated bid value; or

(ii) Two orders of at least 20% each of estimated bid value; or
(iii) Three orders of at least 15% each of estimated bid value.
Satisfactory Performance certificate issued by respective Buyer Organization for the above Orders should
be uploaded with bid. In case of bunch bids, the Category related to primary product having highest bid
value should meet this criterion

17. Past Project Experience

Proof for Past Experience and Project Experience clause: For fulfilling the experience criteria any
one of the following documents may be considered as valid proof for meeting the experience criteria:a.
Contract copy along with Invoice(s) with self-certification by the bidder that service/supplies against the
invoices have been executed.b. Execution certificate by client with contract value.c. Any other document
in support of contract execution like Third Party Inspection release note, etc.Proof for Past Experience and
Project Experience clause: For fulfilling the experience criteria any one of the following documents may be
considered as valid proof for meeting the experience criteria:a. Contract copy along with Invoice(s) with
self-certification by the bidder that service/supplies against the invoices have been executed.b. Execution
certificate by client with contract value.c. Any other document in support of contract execution like Third
Party Inspection release note, etc.

18. Generic

Actual delivery (and Installation & Commissioning (if covered in scope of supply)) is to be done at
following address

O/o- General Manager (CNS)

Central Radio Stores Depot
Airports Authority of India
Safdarjung Airport
New Delhi – 110003
.

19. Buyer Added Bid Specific ATC

Buyer uploaded ATC document Click here to view the file .

Disclaimer/अ वीकरण

The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses

18 / 19
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. If any clause(s) is / are incorporated by the Buyer regarding following, the bid and
resultant contracts shall be treated as null and void and such bids may be cancelled by GeM at any stage of
bidding process without any notice:-

1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any
Category item bunched with it.
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process. (However, in bids for
attached categories, trials are allowed as per approved procurement policy of the buyer nodal Ministries)
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.

Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.

All GeM Sellers / Service Providers are mandated to ensure compliance with all the applicable laws /
acts / rules including but not limited to all Labour Laws such as The Minimum Wages Act, 1948, The
Payment of Wages Act, 1936, The Payment of Bonus Act, 1965, The Equal Remuneration Act, 1976,
The Payment of Gratuity Act, 1972 etc. Any non-compliance will be treated as breach of contract
and Buyer may take suitable actions as per GeM Contract.

This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है

In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action

in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
का आधार होगा।

---Thank You/ ध यवाद---

19 / 19