Scribd
Upload
8 views2 pages

General Description

The document provides specifications for the wheel and tire system, including details on tire sizes, wheel sizes, offsets, and tire inflation pressures. It also outlines service data for axial and radial runout for steel and aluminum wheels, as well as components related to the tire pressure monitoring system (TPMS) and necessary preparation tools. Additionally, it notes that spare tire specifications may vary by model destination.

Uploaded by

Thiago Balthazar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views2 pages

General Description

The document provides specifications for the wheel and tire system, including details on tire sizes, wheel sizes, offsets, and tire inflation pressures. It also outlines service data for axial and radial runout for steel and aluminum wheels, as well as components related to the tire pressure monitoring system (TPMS) and necessary preparation tools. Additionally, it notes that spare tire specifications may vary by model destination.

Uploaded by

Thiago Balthazar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

12FO_US.

book 2 ページ ２０１３年９月２５日 水曜日 午後７時５５分

General Description
WHEEL AND TIRE SYSTEM

1. General Description
A: SPECIFICATION

WT-00001

(1) Offset
(2) P.C.D.

Offset P.C.D. Tire inflation pressure kPa (kgf/cm2, psi)


Tire size Wheel size
mm (in) mm (in) Front wheel Rear wheel
16 × 61/2J
P215/65R16 96H
16 × 61/2JJ *1
48 (1.89) 100 (3.94)
17 × 7J
P225/55R17 95H
17 × 7JJ

Offset P.C.D. Tire inflation pressure kPa (kgf/cm2, psi)


Spare tire size Wheel size
mm (in) mm (in) Front wheel Rear wheel
T155/70D17 110M 17 × 4T 40 (1.57)
P215/65R16 96H 16 × 61/2J
(C4 only) 16 × 61/2JJ 100 (3.94) *1
48 (1.89)
P225/55R17 95H 17 × 7J
(C4 only) 17 × 7JJ
*1: Size and inflation pressure of the standard equipment tire, spare tire for emergency and appropriate tire for equipment are de-

scribed on the “Tire inflation pressure” label attached to the body side of the driver’s door.
NOTE:
• T-type tire is prepared for temporary use as a spare tire.
• Depending on the model destination, the equipped spare tire will differ.
1. SERVICE DATA
Part Axial runout Radial runout
Steel wheel 1.5 mm (0.059 in)
Aluminum wheel 1.0 mm (0.039 in)

WT-2
12FO_US.book 3 ページ ２０１３年９月２５日 水曜日 午後７時５５分

General Description
WHEEL AND TIRE SYSTEM

B: COMPONENT

(1)

T1
(3)
T2 (2)

(4)

WT-00168

(1) TPMS & keyless entry control (3) Transmitter (Snap in type) Tightening torque:N·m (kgf-m, ft-lb)
module
(2) Screw (4) Valve T1: 1.4 (0.14, 1.0)
T2: 13 (1.33, 9.6)

C: PREPARATION TOOL
1. GENERAL TOOL
TOOL NAME REMARKS
Air pressure gauge Used for measuring tire air pressure.
Dial gauge Used for measuring wheel runout.
Wheel balancer Used for adjusting wheel balance.

WT-3

You might also like