Internal water Supply & Sanitary installation
S.No ITEM DESCRIPTION No Length Breadth Height Quantity unit Rate Amount
1 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and
lid,10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle
lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the
walls and floors wherever requied:W.C. pan with lSI marked white solid plastic seat and lid.
4 NO. 5632.40 22529.6
2 Providing and fixing white vitreous china flat back or wallcorner type lipped front urinal basin of
430x260x350mm and 340x41 Ox265 mm sizes respectively with automatic flushing cistern with C. I./M.S.
brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unions and G. I. clamps complete,
including painting of fittings and bra<?kets, cutting and making good the wafls and floors wherever
required:One urinal basin with 5 litre P.V.C white automatic flushing cistern of approved quality.
2 NO. 5342.35 10684.7
3 Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste
of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever
required:15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings
and brackets, cutting and making good the walls wherever required:550x400 mm with single 15 mm C.P.
brass pillar taps
5 NO. 4172.4 20862
4 Providing and fixing kitchen sink including making all connections excluding cost of fittings : White glazed fire
clay sink of size 600x450x250 mm.
1 NO. 3069.35 3069.35
5 Providin and fixing 8 mm dia CP/SS jet with flexible tube upto 1 m long with SS triangular plate to European
type WC of quality and make as approved by Engineer- in - charge
4 NO. 412.1 1648.4
6 Providing and fixing 600x450 mm bevelled edge mirror ofsuperior glass (of approved quality) complete with 6
mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3 NO. 1156.25 3468.75
7 Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screws with
concealed fitting arrangement of approved quality and colour:450 mm long towel rail with total length of 495
mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.
3 NO. 731.25 2193.75
8 Providing and fixing PTMT liquid soap container 109 mmwide, 125 mm high and 112 mm distance from wall
of standard shape with brackets of the same materials with snap fittings of approved quality and colour,
weighing not less than 105 gms.
3 NO. 27.5 82.5
9 P/F electric Geyser of approved brand and make of 45 Litres capacity each with necessary fittings(complete
job)
2 NO. 12000 24000
10 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and
weighing not less than 810 gms.15 mm nominal bore
10 NO. 704.8 7048
11 Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS :
893115 mm nominal bore
10 NO. 690.30 6903
12 Providing and fixing PTMT grating of approved quality andcolour.Circular type 100 mm nominal dia.
10 NO. 51.40 514
13 Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end) 50 mm nominal
bore
2 NO. 986.15 1972.3
Page 1 of 2
14 Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes, having thermal stability for hot and cold
water supply including all CPVC plain and brass threaded fittings 1/C
fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVC
solvent cement and testing of joints complete as per direction of Engineer-in-charge. (Internal work exposed
on walls)
A 15 mm nominal outer dia pipes.
1 200 Rmt 251.1 50220
B 20 mm nominal outer dia pipes.
1 100 Rmt 320.7 32070
C 50 mm nominal outer dia pipes.
1 50 Rmt 915.20 45760
15 Providing and placing on terrace (at all floor levels)polyethylene water storage tank lSI : 12701 marked
indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for
inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star,
Lotus or equivalent having valid lSI license].
1 6000 Litre 8.75 52500
16 Providing and fixing in position precast R.C.C. manholecover and frame of required shape and approved
quality.MD- 10 Square shape 450mm internal dimensions
8 NO. 1166.15 9329.2
17 Provision for fittings viz sockets, elbows, tees, reducers. p trap/s traps etc.(To be paid as per actual). 15000
Providing and fixing toilet paper holder C.P. brass
18
4 NO. 1011.75 4047
19 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:
3 NO. 137.4 412.2
20 Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A
including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
110 MM 100 MTR 366.3 36630
75 mm diameter. 100 MTR 226.15 22615
21
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab
with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal
size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm
nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with
floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand :
4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per
standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610
mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .
4 NO. 11533.5 46134
22 Providing and fixing Motor pump of ½ HP of Havells , Crompton,sharp ,bajaj,or equivalent make including
fittings (complete job)(L.M.R.)
1 NO. 12000 12000
G.TOTAL 431693.75
SAY RS 4.30 Lacs
Page 2 of 2
