Scribd
Upload
51 views1 page

Tesca 43212

The 43212 is a single board Microprocessor Trainer Kit based on the 8086 Microprocessor designed for training engineers in software/hardware development. It features 16K bytes of EPROM, 16K bytes of battery backup RAM, multiple I/O lines, and various interfaces including RS-232C and LCD display. The kit includes powerful commands for memory and register examination, and supports downloading/uploading files from/to a PC.

Uploaded by

Rasha Orban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views1 page

Tesca 43212

The 43212 is a single board Microprocessor Trainer Kit based on the 8086 Microprocessor designed for training engineers in software/hardware development. It features 16K bytes of EPROM, 16K bytes of battery backup RAM, multiple I/O lines, and various interfaces including RS-232C and LCD display. The kit includes powerful commands for memory and register examination, and supports downloading/uploading files from/to a PC.

Uploaded by

Rasha Orban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Order Code - 43212

8086 Microprocessor Trainer Kit

43212 is a single board Microprocessor Trainer Kit based on 16 bit l 16 bit Timer/Counter through 8253 brought out at 20
8086 Microprocessor, which is widely used to train engineers to Pins FRC Connector.
develop software/hardware for any industrial process & control. l RS-232C interface using 8251 brought out at 9 Pins D-
This Kit consists of power-full Monitor EPROM, RAM, I/O Lines, Type Connector.
Timer/Counter, Serial, LCD Display and Keyboard for Man to l On-board Interrupt controller using 8259 brought out at
Machine Interface. 20 Pins FRC Connector.
Features l 20x2/40x2/20x4 Alphanumeric LCD Display with
l 16K Bytes of EPROM with 16K bytes of Battery Backup Backelite
RAM. l 101 ASCII Keyboard interface using 89c2051 operating
l 72 I/O Lines, Three Channel Timer/Counter, PC Serial @ 12MHz
Interface using USART, Interrupt Controller. l Powerful Commands like Examine/Edit Memory,
l 20x2 LCD Display with 101 ASCII Keyboard. Examine/Edit Register, Single stepping, Execution,
l Power-full Command like Single Stepping, Break Point, Block Move can be used through ASCII Keyboard.
Full Clock Execution, Examine Memory/Register. l On-board Single Line Assembler & Disassembler.
l Uploading & Downloading to and from PC in l Facility for Downloading/Uploading files from/to PC.
Windows98/XP/NT. l All address, data & control lines are available on KXT
l In-Built Power Supply! 8086/8088 CPU operating at Bus 50 pin FRC Connector to interface with SC-XX
2.5/5MHz Series.
l All ICS are mounted on IC Sockets.
Specifications l Bare board Tested Glass Epoxy SMOBC PCB is used.
l 8086 Processor can be replaced by 8088 Processor l In-Built Power Supply of +5V/2A, ±12V/250mA
l On-board sockets provided to facilitate the use of 8087 l Attractive Box Packaging.
Co-processor and 8089 I/O Processor l User's Manual with sample programs.
l 16K bytes of RAM using two nos. of 6264 with Battery l
Backup expandable up to 256KB. Optional
l 16K bytes of powerful monitor EPROM using two nos. l PRINTER INTERFACE to interface with DOT
of 27512 MATRIX Printer.
l 72 I/O lines through 3 nos. of 8255 brought at 26 Pins l On-board Real Time Clock using RTC-6242.
FRC Connector to interface with IC-XX Series. l RS-232 Cable.

Note: Specifications are subject to change.

Tesca Technologies Pvt. Ltd.


305, Taru Chhaya Nagar, Tonk Road, Jaipur-302029, India
Tel: +91-141-2724326, Mob: +91-9413330765
Email: [email protected], [email protected]
Website: www.tesca.in

You might also like