Scribd
Upload
9 views3 pages

Emerging Technology Objective

The document contains a series of questions and answers related to fuel cells and hydrogen technologies. It covers topics such as the types of fuel cells, their operating temperatures, hydrogen production methods, and storage technologies. The answers provided indicate the correct options for each question, highlighting key concepts in emerging energy technologies.

Uploaded by

erindrajitdasee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views3 pages

Emerging Technology Objective

The document contains a series of questions and answers related to fuel cells and hydrogen technologies. It covers topics such as the types of fuel cells, their operating temperatures, hydrogen production methods, and storage technologies. The answers provided indicate the correct options for each question, highlighting key concepts in emerging energy technologies.

Uploaded by

erindrajitdasee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Eazy Electrical EMERGING TECHNOLOGIES Contact – 8335067725/8910918936

1. A fuel cell is basically:


a. an electro-mechanical energy conversion device
b. an electro-static energy conversion device
c. an electro-chemical energy conversion device
d. a thermo-electric energy conversion device
2. Wide-spread use of fuel cell is hindered mainly due to:
a. its high cost
b. its high weight and size
c. its high efficiency
d. non-availability of hydrogen
3. Which fuel cell has the lowest operating temperature?
a. PAFC
b. PEMFC
c. SOFC
d. MCFC
4. Which fuel cell has the highest operating temperature?
a. PAFC
b. PEMFC
c. SOFC
d. MCFC
5. Direct methanol fuel cell is a modified version of:
a. PAFC
b. PEMFC
c. SOFC
d. MCFC
6. As a load is applied on an open circuited fuel cell and it is gradually increased:
a. its efficiency increases
b. its output voltage increases
c. its output voltage remains unchanged
d. its output voltage decreases
7. For proper operation of a fuel cell, in which region of the VI characteristics, the operating
point is set
a. in the low load region
b. in the middle, near flat region
c. in the high load region
d. in any region irrespective of load
8. With pure hydrogen and pure oxygen as input the exhaust from fuel cell contains:
a. water vapor CO2 NO2and CO2
b. water vapor CO and CO2
c. water vapor CO and CO2
d. water vapor only

1|Page
Eazy Electrical EMERGING TECHNOLOGIES Contact – 8335067725/8910918936

9. Hydrogen can be used


a. as primary energy source only
b. as energy carrier only
c. both as primary energy source as well as energy carrier
d. neither as primary energy source nor as energy carrier
10. 95% of hydrogen production in the U.S.A. is met:
a. through electrolysis of water
b. through thermolysis of water
c. through steam reforming of methane
d. through bio photosynthesis
11. The simplest method of hydrogen production is
a. electrolysis of water
b. thermolysis of water
c. steam reforming of methane
d. bio photosynthesis
12. Most mature technology available for hydrogen storage is:
a. liquid hydrogen storage at low temperature
b. metal hydride
c. carbon nanotubes
d. compressed hydrogen gas in steel tank or cylinder
13. Metal hydride is used for the storage of:
a. hydrogen energy
b. wind energy
c. biomass energy
d. solar energy
14. Which fuel is used in fuel cells?
a. Oxygen
b. Sulfur
c. Carbon
d. Hydrogen

2|Page
Eazy Electrical EMERGING TECHNOLOGIES Contact – 8335067725/8910918936

1 C 2 A 3 B 4 C 5 B
6 D 7 B 8 D 9 B 10 C
11 A 12 D 13 A 14 C

3|Page

You might also like