AMENDMENT NO.
1 February 2021
TO
IS 16192 (PART 1) : 2014 AUTOMOTIVE VEHICLES —
WHEEL RIMS FOR TWO AND THREE WHEELED
VEHICLES
PART 1 LIGHT ALLOY WHEEL RIMS —
METHOD OF TESTS AND REQUIREMENTS
(First cover page, title) — Substitute the following for the existing:
‘भारतीय मानक
स्वचल वाहन — दो और तीन पहिए वाले
वाहनों के लिए व्हील रिम
भाग 1 हल्के मिश्र धातु के व्हील रिम —
परीक्षण पद्धतियाँ और अपेक्षाएँ
Indian Standard
Automotive Vehicles — Wheel Rims
for Two and Three Wheeled Vehicles
Part 1 Light Alloy Wheel Rims —
Methods of Tests and Requirements’
Price Group 1
1
(Page 1, title) — Substitute the following for the existing title:
‘Indian Standard
AUTOMOTIVE VEHICLES —
WHEEL RIMS FOR TWO AND
THREE WHEELED VEHICLES
PART 1 LIGHT ALLOY WHEEL RIMS —
METHODS OF TESTS AND REQUIREMENTS’
(Page 1, clause 1) — Insert the following at the end of the clause:
‘NOTE — This standard applies to the wheel rims of e-rickshaws/e-carts also.’
(Page 1, clause 2) — Substitute the following for the existing:
‘2 REFERENCE
The following standard contains provisions, which through reference in this
text, constitute provisions of this standard. At the time of proposal, the edition
indicated was valid. All standards are subject to revision, and parties to agreements
based on this standard are encouraged to investigate the possibility of applying
the most recent edition of the standard indicated below:
IS No. Title
10694 (Part 1) : 2009 Automotive vehicles — Rims — General requirements:
Part 1 Nomenclature, designation, marking and
measurement (second revision)’
(Page 3, clause 4.5.2) — Substitute the following for the existing:
‘4.5.2 After being subjected to 100 000 cycles of the torsion test as specified in
Annex D, there shall be no evidence of harmful cracks, significant deformation or
any abnormal looseness at joints.’
2
(Page 3, clause 6) ─ Substitute the following for the existing:
‘6 MARKING
6.1 Wheel rims shall be durably and legibly marked with the following:
a) Size designation shall be as per IS 10694 (Part 1),
b) Name or trade-mark of the wheel rim manufacturer,
c) Date of manufacturing preferably in the form of year and month or
year and quarter of the year (for example 2009 indicates Sept 2020;
20 IV indicates fourth quarter of 2020);
d) The letter ‘HD’ for rims designed for three wheeled goods carriages,
and
e) Light alloy wheels for tubeless tyres application shall be marked with
the words “TUBELESS or TUBELESS TYRE APPLICATION or
SUITABLE FOR TUBELESS TYRES”.
6.2 The markings shall be made as per 4 of IS 10694 (Part 1).
6.3 BIS Certification Marking
The product(s) conforming to the requirements of this standard may be certified
as per the conformity assessment schemes under the provisions of the Bureau of
Indian Standards Act, 2016 and the Rules and Regulations framed thereunder, and
the product(s) may be marked with the standard mark.’
(Page 6, clause C-2.1, first line) — Substitute C-1 for C-1.1.
(TED 07)
Publication Unit, BIS, New Delhi, India
