A350 COLLINS

NACELLE TOOLING CATALOG

A350 GSE TOOLS CATEGORY PART NUMBER NAME
MINIMAL QT
FOR EIS
CONTENT
352-7000-1GSE Inlet Cowl Sling 1
351-7000-2GSE Inlet Cowl Dolly 1
We have the capability to provide you all recommended
GSE's based on the Aircraft Maintenance Manual (AMM) 351-7000-3GSE Inlet Protective Rug 0
for your EIS (Entry-into-Service) program, and all your INLET COWL 351-7000-4GSE Inlet Cowl Cover 2
maintenance operations.
NOZZLE & CENTER BODY
351-7000-5GSE Inlet Cowl Transportation Pallet 0 › FWD Center Body Handling Aid...................................... p.25
351-2100-14GSE Fan Cowl Handling Sling › AFT Center Body Handling GSE...................................... p.26
Thanks to our Tooling recommendation team, we can 1
› Nozzle Handling Aid.......................................................... p.27
propose you a tailored tooling list for your maintenance 351-2100-15GSE Fan Cowl Dolly 2 › Center Body / Nozzle Protective Rug............................ p.28
workscope. 351-2100-16GSE Fan Cowl Hinge Bolt Thread Protectors 1 › Exhaust Cover................................................................... p.29
› Exhaust Dolly..................................................................... p.30
351-2200-17GSE Fan Cowl Door Plug 2
FAN COWLS
351-1000-25GSE Forward Secondary Structure Sling 0
351-2100-18GSE Nep Fan Cowl Hold Open Rod GSE 1 THRUST REVERSER
351GSE3001-901 Thrust Reverser Sling - LH / RH 1 › Thrust Reverser Sling - LH/ RH....................................... p.8
› Thrust Reverser Dolly........................................................ p.9
351-3000-7GSE Thrust Reverser Dolly 1
› Thrust Reverser Hinge Bolt Thread Protector.............. p.10
351-3000-8GSE Thrust Reverser Hinge Bolt Thread Protector 1 › Thrust Reverser Cover..................................................... p.11
351-3000-10GSE Thrust Reverser Cover › Thrust Reverser C-Duct Step Blocks............................. p.12
2
› Thrust Reverser Hydraulic Opening System................. p.13
351-3000-11GSE Thrust Reverser C-Duct Step Blocks 0 › Pre-Nep Pressure Relief Latch Tester........................... p.14
351-3000-12GSE Thrust Reverser Hydraulic Opening System 1 › Translating Sleeve Handling Sling................................. p.15
THRUST › Thrust Reverser Hold Open Strut to Pylon................... p.16
REVERSER 351GSE3008-901 Pre-Nep Pressure Relief Latch Tester 1 › Lower Beavertail fairing tool........................................... p.17
351-6100-27GSE Translating Sleeve Handling Sling 1 › Nep Pressure Relief Latch Tester................................... p.18
351-3000-36GSE Thrust Reverser Hold Open Strut to Pylon 1
FAN COWLS
351-9920-38GSE Lower Beavertail fairing tool 0 › Fan Cowl Handling Sling.................................................. p.19
351-3000-40GSE Nep Pressure Relief Latch Tester 0 › Fan Cowl Dolly................................................................... p.20
› Fan Cowl Hinge Bolt Thread Protectors........................ p.21
351-5010-19GSE FWD Center Body Handling Aid 0 › Fan Cowl Door Plug.......................................................... p.22
351-5060-20GSE AFT Center Body Handling GSE 0 › Forward Secondary Structure Sling.............................. p.23
› Nep Fan Cowl Hold Open Rod GSE................................. p.24
351-4010-21GSE Nozzle Handling Aid 1
NOZZLE & 351-4000-22GSE Center Body / Nozzle Protective Rug 0 INLET COWL
CENTER BODY › Inlet Cowl Sling................................................................... p.3
351-4000-23GSE Exhaust Cover 2 › Inlet Cowl Dolly................................................................... p.4
351-4000-24GSE Exhaust Dolly 0 › Inlet Protective Rug............................................................ p.5
› Inlet Cowl Cover.................................................................. p.6
› Inlet Cowl Transportation Pallet....................................... p.7
2
 352-7000-1GSE

351-7000-2GSE
INLET COWL SLING INLET COWL DOLLY

DESCRIPTION – USE DESCRIPTION – USE

The Inlet Cowl Sling is used to install or remove The Inlet Cowl Dolly is used for maintenance and
the Inlet Cowl from the Engine. This tool has a moving the Inlet Cowl in the hangar or shop facility.
feature that allows the tool operator to rotate the This tool aides repair work in the hangar of shop
Inlet Cowl that eases the installation on the Engine facility.
or placement on the Dolly.

CAUTION
CAUTION
This tool has been validated for the maintenance
This tool is the only tool validated to lift the A350 of the A350 Inlet Cowl. If the Inlet Cowl is moved
Inlet Cowl. If the Inlet Cowl is lifted with another tool, or repaired on another tool and there is damage,
and there is damage, the insurance company may the insurance company may not cover the damage.
not cover the damage.

TEST
Dedienne Aerospace has regional facilities to aid
in the required annual testing and recertification.

DIMENSIONS
4700 x 1700 x 1300 mm
WEIGHT
680 kg [1,499 lbs]
EIS DIMENSIONS
4000 x 2800 x 2850 mm
WEIGHT
2200 kg [4,849 lbs]
EIS
[186 x 67 x 52 in] [158 x 111 x 113 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
3 A350 GSE TOOLS 4 A350 GSE TOOLS
 351-7000-3GSE

351-7000-4GSE
INLET PROTECTIVE RUG INLET COWL COVER

DESCRIPTION – USE DESCRIPTION – USE

This tool is used as a protective mat on the Inlet The Inlet Cowl Cover is used to protect the Engine
Cowl Inner Barrel surface during maintenance or from dust, water and wind during parking, mooring
removal and installation activities on the Inlet Cowl. or storage of the aircraft.
The tool prevents dents and delamination to the
critical Acoustic Inner Barrel Panels.
CAUTION
Without the Inlet Cowl Cover, water, dust
or wind can go inside the Engine.
> Water retention: accelerates corrosion.
> Dust: the Engine could be damaged during
the ignition.
> Wind: allows blade rotation which can create
damage.
The Engine warranty may be void if the Covers
are not used properly under the required conditions
and there is damage to the Engine.

DIMENSIONS
800 x 400 x 200 mm
WEIGHT
25 kg [56 lbs]
DIMENSIONS
800 x 500 x 400 mm
WEIGHT
20 kg [45 lbs]
EIS
[32 x 16 x 8 in] [32 x 20 x 16 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
5 A350 GSE TOOLS 6 A350 GSE TOOLS
 351-7000-5GSE

351GSE3001-901
INLET COWL TRANSPORTATION PALLET THRUST REVERSER
SLING - LH/RH

DESCRIPTION – USE DESCRIPTION – USE

The Inlet Cowl Transportation Pallet is highly The Thrust Reverser Sling is used to load or unload
recommended. If the airline does not own a the Thrust Reverser from the Transportation Pallet,
spare Inlet Cowl, the Pallet will allow quicker rotate it, then install or remove the Thrust Reverser
transportation to a qualified MRO (if the airline does from the Engine/Pylon.
not have the repair capability). Where hangar or
shop space is limited this Pallet is a good, but limited
alternative to the Inlet Cowl Dolly 351-7000-2GSE. CAUTION
This tool is the only tool validated to lift the A350
Thrust Reverser. If the Thrust Reverser is lifted using
another tool, and there is damage, the insurance may
not cover the damage.

TEST
Dedienne Aerospace has regional facilities to aid
in the required annual testing and recertification.

DIMENSIONS
4600 x 3550 x 2000 mm
WEIGHT
1300 kg [2,866 lbs]
DIMENSIONS
2600 x 1800 x 650 mm
WEIGHT
400 kg [882 lbs]
EIS
[182 x 140 x 79 in] [103 x 71 x 26 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
7 A350 GSE TOOLS 8 A350 GSE TOOLS
 351-3000-7GSE

351-3000-8GSE
THRUST REVERSER DOLLY THRUST REVERSER HINGE
BOLT THREAD PROTECTOR

DESCRIPTION – USE DESCRIPTION – USE

The Thrust Reverser Dolly is used for maintenance This tool is used to protect the threads of the Bolts
work and moving the Thrust Reverser in the hangar during installation & removal of the Thrust Reverser.
or shop. The Dolly allows to make inspections The Protector allows the Bolt installation without
or repairs into the inside surface of the Thrust any damage to the Bolts or to the Thrust Reverser.
Reverser.

CAUTION
When the Thrust Reverser is removed from the
aircraft using the Thrust Reverser Sling, the Thrust
Reverser Dolly is needed to store or work on the
Thrust Reverser.

DIMENSIONS
3700 x 3100 x 1700 mm
WEIGHT
1350 kg [2,976 lbs]
EIS DIMENSIONS
400 x 300 x 160 mm
WEIGHT
3 kg [7 lbs]
EIS
[146 x 123 x 67 in] [16 x 12 x 7 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
9 A350 GSE TOOLS 10 A350 GSE TOOLS
 351-3000-10GSE

351-3000-11GSE
THRUST REVERSER COVER THRUST REVERSER
C-DUCT STEP BLOCKS

DESCRIPTION – USE DESCRIPTION – USE

The Thrust Reverser Cover is used to protect The Thrust Reverser C-Duct Step is used to give
the Thrust Reverser By-pass Ducts from dust, access to the upper half of the C-Duct for inspection
water and wind during parking, mooring or storage or maintenance.
of the aircraft.

CAUTION
Without the Thrust Reverser Cover, water,
dust or wind can go inside the Engine.
> Water retention: accelerates corrosion.
> Dust: the Engine could be damaged during
the ignition.
> Wind: allows blade rotation which can create
damage.
The Engine warranty may be void if the Covers
are not used properly under the required conditions
and there is damage to the Engine.

DIMENSIONS
2200 x 1000 x 700 mm
WEIGHT
110 kg [243 lbs]
EIS DIMENSIONS
1750 x 1600 x 1000 mm
WEIGHT
193 kg [426 lbs]
[87 x 40 x 28 in] [69 x 63 x 40 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
11 A350 GSE TOOLS 12 A350 GSE TOOLS
 351-3000-12GSE

351GSE3008-901
THRUST REVERSER PRE-NEP PRESSURE
HYDRAULIC OPENING SYSTEM RELIEF LATCH TESTER

DESCRIPTION – USE DESCRIPTION – USE

The Thrust Reverser Hydraulic Opening System is This tool is used to perform functional tests of Thrust
used to manually open and close the Thrust Reverser Reverser Latch forces. This tool is needed to check
C-Ducts. The three manometers allow this pump to the stresses applied to the Latch. This tool needs to
open both Thrust Reverser C-Ducts at the same time be used yearly.
to check the hydraulic pressure on each C-Duct.

CAUTION
CAUTION
This tool is needed to test the Latch. If the Latch
The Thrust Reverser Hydraulic Opening System is not properly calibrated it may open unnecessarily
or pump has been designed for use on the A350. in flight or it may not open when required during
If another pump is used to open the C-Ducts and a pressure increase. This may cause the Thrust
there is damage, the insurance may not cover Reverser to depart the aircraft.
the damage.

TEST
Dedienne Aerospace has regional facilities to aid
in the required annual testing and recertification.

DIMENSIONS
1000 x 800 x 1150 mm
WEIGHT
80 kg [177 lbs]
EIS DIMENSIONS
350 x 200 x 200 mm
WEIGHT
1 kg [3 lbs]
EIS
[40 x 32 x 46 in] [14 x 8 x 8 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
13 A350 GSE TOOLS 14 A350 GSE TOOLS
 351-6100-27GSE

351-3000-36GSE
TRANSLATING SLEEVE THRUST REVERSER
HANDLING SLING HOLD OPEN STRUT TO PYLON

DESCRIPTION – USE DESCRIPTION – USE

This tool is used to add or remove Transleeve from The Thrust Reverser Hold Open Strut is used to hold
Inner Fixed Structure while TR is on the Dolly. open both Thrust Reverser Halves (C-Ducts) during
the removal or installation of the Engine from the
Pylon. This tool also allows the Thrust Reverser
CAUTION Halves to be held open without the Engine installed
on the Pylon on A350.
This tool is the only validated to add or remove the
Transleeve for the A350. If the Transleeve is lifted
with another tool, and there is damage, the insurance
CAUTION
may not cover the damage.
This tool is mandatory for this task.
If not used the Thrust Reverser or the Pylon
TEST can be damaged.

Dedienne Aerospace has regional facilities to aid

in the required annual testing and recertification.
TEST
Dedienne Aerospace has regional facilities to aid
in the required annual testing and recertification.

DIMENSIONS
1200 x 800 x 500 mm
WEIGHT
50 kg [111 lbs]
EIS DIMENSIONS
1000 x 600 x 500 mm
WEIGHT
30 kg [67 lbs]
EIS
[48 x 32 x 20 in] [40 x 24 x 20 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
15 A350 GSE TOOLS 16 A350 GSE TOOLS
 351-9920-38GSE

351-3000-40GSE
LOWER BEAVERTAIL NEP PRESSURE RELIEF LATCH TESTER
FAIRING TOOL

DESCRIPTION – USE DESCRIPTION – USE

This Tool is used to locate and install Beavertail This tool verifies if the latch tension is set correctly
to latch Beam while translating sleeve is stowed to release at a predetermined load.
or deployed for L/H and R/H.

TEST
Dedienne Aerospace has regional facilities to aid
in the required annual testing and recertification.

DIMENSIONS WEIGHT DIMENSIONS WEIGHT

700 x 300 x 150 mm 10 kg [23 lbs] 350 x 200 x 200 mm 1 kg [3 lbs]
[28 x 12 x 6 in] [14 x 8 x 8 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
17 A350 GSE TOOLS 18 A350 GSE TOOLS
 351-2100-14GSE

351-2100-15GSE
FAN COWL HANDLING SLING FAN COWL DOLLY

DESCRIPTION – USE DESCRIPTION – USE

The Fan Cowl Sling is used to remove or re-install The Fan Cowl Dolly is used to move the Fan Cowl
the Fan Cowl on the Engine. Once a Fan Cowl is off in the hangar or shop and for Fan Cowl Storage.
of the Engine, the Fan Cowl Sling is used to load and The Fan Cowl can be maintained or stored
unload the Fan Cowl on the Shipping Pallet or Fan on the Fan Cowl Dolly.
Cowl Dolly.

CAUTION
CAUTION
After using the Fan Cowl Sling (-14GSE) to remove
This Sling is a lifting tool and it is the only tool a Fan Cowl from the Engine, the Fan Cowl Dolly
validated to lift the A350 Fan Cowl. If the Fan Cowl (-15GSE) is needed to move, store or do maintenance
is lifted with another tool, and there is damage, on the Fan Cowl.
the insurance may not cover the damage.

TEST
Dedienne Aerospace has regional facilities to aid
in the required annual testing and recertification.

DIMENSIONS
1200 x 800 x 500 mm
WEIGHT
70 kg [155 lbs]
EIS DIMENSIONS
4900 x 2400 x 1600 mm
WEIGHT
1100 kg [2,425 lbs]
EIS
[48 x 32 x 20 in] [193 x 95 x 63 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
19 A350 GSE TOOLS 20 A350 GSE TOOLS
 351-2200-17GSE
351-2100-16GSE
FAN COWL HINGE BOLT FAN COWL DOOR PLUG
THREAD PROTECTORS

DESCRIPTION – USE DESCRIPTION – USE

The Fan Cowl Hinge Bolt Protectors are used The Fan Cowl Door Plug is used to cover the
to protect the Bolt threads during removal Fan Cowl Vent and protect the Engine from dust,
and installation of the Fan Cowl from the Engine. water and wind during parking, mooring or storage
It allows the Fan Cowl to be removed or installed of the aircraft.
on the Engine without damaging the Bolt threads.

CAUTION
Without the Fan Cowl Door Plug, water, dust
or wind can go inside the Engine.
> Water retention: accelerates corrosion.
> Dust: the Engine could be damaged during
the ignition.
> Wind: allows blade rotation which can create
damage.
The Engine warranty may be void if the Covers
are not used properly under the required conditions
and there is damage to the Engine.

DIMENSIONS
400 x 300 x 160 mm
WEIGHT
3 kg [7 lbs]
EIS DIMENSIONS
500 x 400 x 400 mm
WEIGHT
5 kg [12 lbs]
EIS
[16 x 12 x 7 in] [20 x 16 x 16 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
21 A350 GSE TOOLS 22 A350 GSE TOOLS
 351-1000-25GSE

351-2100-18GSE
FORWARD SECONDARY NEP FAN COWL HOLD OPEN ROD GSE
STRUCTURE SLING

DESCRIPTION – USE DESCRIPTION – USE

This Forward Secondary Structure Sling is used to This GSE is used to hold open the Fan Cowl (FC)
remove or install the Forward Secondary Structure at 37° open condition. The PDOS will be used to open
on the aircraft Pylon. The Forward Secondary the FC to 37° and this GSE will hold it open.
Structure is high off the ground above the Engine. The GSE is designed each for LH & RH side of the FC.
It is needed for the mechanics to safely remove
and install the Forward Secondary Structure.
CAUTION
This tool is a lifting tool and it is the only tool
CAUTION
validated to lift the A350 Forward Secondary
This tool is a lifting tool and it is the only tool Structure. If the Forwards Secondary Structure
validated to lift the A350 Forward Secondary is lifted with another tool, and there is damage,
Structure. If the Forward Secondary Structure the insurance may not cover that damage.
is lifted with another tool, and there is damage,
the insurance may not cover that damage.
TEST
Dedienne Aerospace has regional facilities to aid
TEST
in the required annual testing and recertification.
Dedienne Aerospace has regional facilities to aid
in the required annual testing and recertification.

DIMENSIONS WEIGHT DIMENSIONS WEIGHT

800 x 500 x 400 mm 10 kg [23 lbs] 1300 x 650 x 300 mm 30 kg [67 lbs]
[32 x 20 x 16 in] [52 x 26 x 12 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
23 A350 GSE TOOLS 24 A350 GSE TOOLS
 351-5010-19GSE

351-5060-20GSE
FWD CENTER BODY HANDLING AID AFT CENTER BODY HANDLING GSE

DESCRIPTION – USE DESCRIPTION – USE

The FWD Center Body Handling Aid is used to assist This tool is used for removal and installation
manually removing and re-installing the FWD Center of AFT Center Body only.
Body on the Engine by two mechanics.

CAUTION
CAUTION
This Aid is a lifting tool and it is the only tool
This Aid is a lifting tool and it is the only tool validated to lift the A350 Center Body. If the AFT
validated to lift the A350 Center Body. If the FWD Center Body is lifted with another tool, and there
Center Body is lifted with another tool, and there is damage, the insurance may not cover the damage.
is damage, the insurance may not cover the damage.

TEST
TEST
Dedienne Aerospace has regional facilities to aid
Dedienne Aerospace has regional facilities to aid in the required annual testing and recertification.
in the required annual testing and recertification.

DIMENSIONS WEIGHT DIMENSIONS WEIGHT

600 x 400 x 400 mm 8 kg [18 lbs] 600 x 400 x 400 mm 8 kg [18 lbs]
[24 x 16 x 16 in] [24 x 16 x 16 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
25 A350 GSE TOOLS 26 A350 GSE TOOLS
 351-4010-21GSE

351-4000-22GSE
NOZZLE HANDLING AID CENTER BODY/NOZZLE PROTECTIVE RUG

DESCRIPTION – USE DESCRIPTION – USE

The Nozzle Handling Aid is used to remove or install This tool is used as a Protective Rug on the Nozzle
the Nozzle on the Engine onto the A350. The Exhaust inner surface during Maintenance or Removal/
Dolly (-24GSE) is used to move or store the Nozzle Installation activity on Nozzle.
in the hangar or shop.

CAUTION
This Aid is a lifting tool and it is the only tool
validated to lift the A350 Nozzle. If the Nozzle
is lifted with another tool, and there is damage,
the insurance may not cover that damage.

TEST
Dedienne Aerospace has regional facilities to aid
in the required annual testing and recertification.

DIMENSIONS
1800 x 1800 x 1800 mm
WEIGHT
500 kg [1,102 lbs]
EIS DIMENSIONS
800 x 600 x 500 mm
WEIGHT
17 kg [38 lbs]
[71 x 71 x 71 in] [32 x 24 x 20 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
27 A350 GSE TOOLS 28 A350 GSE TOOLS
 351-4000-23GSE

351-4000-24GSE
EXHAUST COVER EXHAUST DOLLY

DESCRIPTION – USE DESCRIPTION – USE

The Thrust Reverser Cover is used to protect The Exhaust Dolly is used to move, do maintenance
the Thrust Reverser By-pass Ducts from dust, and store the FWD Center Body, Center Body and
water and wind during parking, mooring or storage Nozzle after removal from the Engine.
of the aircraft.

CAUTION
CAUTION
After using the -19GSE & -21GSE the -24GSE
Without the Thrust Reverser Cover, water, is required for transportation or storage of the
dust or wind can go inside the Engine. Center Body and Nozzle. Without the -24GSE,
> Water retention: accelerates corrosion. it will be difficult to store or work on these items.
> Dust: the Engine could be damaged during
the ignition.
> Wind: allows blade rotation which can create
damage.
The Engine warranty may be void if the Covers
are not used properly under the required conditions
and there is damage to the Engine.

DIMENSIONS
1800 x 1000 x 400 mm
WEIGHT
52 kg [115 lbs]
EIS DIMENSIONS
3000 x 1600 x 1100 mm
WEIGHT
560 kg [1,235 lbs]
[71 x 40 x 16 in] [119 x 63 x 44 in]

The pictures, measurements, and weights shall be used only as an indication. The pictures, measurements, and weights shall be used only as an indication.
29 A350 GSE TOOLS 30 A350 GSE TOOLS
TOOLING SERVICES

PERIODIC CERTIFICATION REPAIR & UPGRADE FULL REFURBISHMENT SPARE PARTS LEASING SOLUTIONS TRAINING
• Precision equipment calibration REPAIR: • Engine Stands • Seals • Engine Stands • Global network of technical instructors
• Dynamometer calibration • Repair/periodic & preventive maintenance • Engine Tooling • Shock mounts • Engine Tooling • Training on use & maintenance
• Electronic calibration • Hydraulic & pneumatic repair • Nacelle Tooling • Wheels • Nacelle Tooling
• Periodic load testing • Engine Stands repair & maintenance • Aircraft Tooling • Tow bars • Aircraft Tooling
• Ground Support Equipment • ... • Ground Support Equipment
UPGRADE: • On-Wing Support Tooling Solutions • On-Wing Support Tooling Solutions
• Service Bulletins • Shipping Containers • Shipping Containers
• OEM Upgrades • Helicopter Tooling • Helicopter Tooling
• Full diagnostic • Defense Tooling • Defense Tooling
• Dimensional control
• Load testing

31 A350 GSE TOOLS 32 A350 GSE TOOLS

 DERBY
HAMBURG
SHANNON
BRUSSELS PRODUCTION FACILITIES & SERVICE CENTERS
01 PARIS

TOULOUSE 02 BUDAPEST
ISTANBUL
USA MIAMI USA CINCINNATI MEXICO

AMERICAS
CINCINNATI 2500 NW 74. Ave 4330 Batavia road Av. de las Fuentes No. 106 Int.

PHOENIX 03 06 SHANGHAI
Miami – FL 33122
+1 305 716 83 00
Batavia – Ohio
+1 513 658 75 45
12 y 13 Col. Parque Industrial
Bernardo Quintana C.p. 76246
MIAMI El Marqués, Querétaro
DOHA DUBAI
QUERETARO HONG KONG
JEDDAH 04 ZHUHAI +52 442 824 35 57

03 BANGALORE FRANCE TOULOUSE FRANCE PARIS UNITED KINGDOM

BOGOTA ZAC de Saint-Martin Aérodrome Paris-Villaroche, Unit 28 Eagle Park – Alfreton Road
5, rue Gaye Marie Zone Nord, bâtiment A08 Derby, Derbyshire
SINGAPORE
31300 – Toulouse 77950 – Montereau-Sur-Le-Jard DE21 4AE
+33 5 61 06 77 79 +33 6 28 10 76 79 +44 133 261 38 28
01

EUROPE
Production & service center
IRELAND GERMANY
Service center 05 9/10 Beechpark Logistics Schützenwall 37-41
Smithstown, Shannon Co.Clare 22844 Norderstedt
Sales office
+35 38 606 728 98 +49 40 66 89 29 72

UNITED ARAB EMIRATES QATAR

MIDDLE EAST
& AFRICA
Warehouse FZS1AC01 LIU LG 33-35 Um Al Houl Free Zone
South Zone, Jebel Ali Free Zone P.O Box # 30661 – Doha
P.O. Box: 18056 – Dubai +974 50 58 67 87
+971 4 295 0071
SALES & TECHNICAL SUPPORT
SINGAPORE INDIA
PROGRAM MANAGEMENT [email protected] 1 Seletar Regus, Beech E-1, WEBSITES & SOCIAL MEDIAS

PACIFIC
Aerospace Lane Manyata Embassy Business Park,

ASIA
01 NORTH & SOUTH AMERICAS [email protected] [email protected] Singapore 797435 Outer Ring Road, Nagavara,
+65 62 62 59 79 Bengaluru – 560045
02 EUROPE [email protected] [email protected] +91 82 17 588 075

03 MIDDLE EAST & AFRICA [email protected] [email protected] CHINA HONG KONG DEDIENNE-AERO.COM LEAPTOOLING.COM NACELLETOOLING.COM

& HONG KONG

N°5 Jinliang Road 806 Capitol Centre
04 INDIA [email protected] [email protected]

CHINA
Hongqi town – Jinwan Zone 5-19 Jardine’s Bazaar
519090 Zhuhai City Causeway Bay
05 SINGAPORE & ASIA PACIFIC [email protected] [email protected] Guangdong +86 756 893 6510
+86 756 893 6510
06 CHINA [email protected] [email protected]
 WWW.NACELLETOOLING.COM

© Dedienne Aerospace // All rights reserved // Photo credits: Dedienne Aerospace 05-2022 // 3