Scribd
Upload
62 views2 pages

Mercusys Router Multi-Mode QIG V120210806074354

This document is a quick installation guide for setting up a Mercusys router, detailing the steps for connecting hardware, setting up the network, and troubleshooting common issues. It includes instructions for various modes such as Router, Access Point, Range Extender, and WISP modes. Additionally, it provides FAQs and button explanations for user convenience.

Uploaded by

AAAA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views2 pages

Mercusys Router Multi-Mode QIG V120210806074354

This document is a quick installation guide for setting up a Mercusys router, detailing the steps for connecting hardware, setting up the network, and troubleshooting common issues. It includes instructions for various modes such as Router, Access Point, Range Extender, and WISP modes. Additionally, it provides FAQs and button explanations for user convenience.

Uploaded by

AAAA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

*Images may differ from actual products.

1. Connect the Hardware


Quick Installation Guide If your internet connection is through an Ethernet cable from the wall, connect the Ethernet cable directly to the router’s WAN port, turn on the router,
and wait for it to start.
Wireless Router
If your internet connection comes from a modem (DSL / Cable / Satellite modem), follow the steps below to complete the hardware connection.

Power adapter Turn off the modem, and remove the


Set up with videos: backup battery if it has one.
Visit https://www.mercusys.com/support/ to search for the setup video of
your product.
Power adapter
For detailed instructions like button and LED description, and advanced
features, please visit https://www.mercusys.com/support/ to search for the Turn on the modem.
user manual of your product.

Router

Router mode is the default mode. In this mode, the router connects to the
internet and shares the network to wired and wireless devices.
LAN WAN POWER RESET/WPS

Modem

INTERNET

Connect the modem to the WAN port Turn on the router,


on your router with an Ethernet cable. and wait for it to start.

2. Connect Your Devices to the Router 3. Set Up the Network


Connect your computer to the router (Wired or Wireless) 1. Launch a web browser, and enter http://mwlogin.net in the 2. Follow the step-by-step instructions to set up the internet
address bar. Create a password to log in. connection.
Wired Note: If the login window does not appear, please refer to FAQ > Q1. Note: If you are not sure of the Connection Type, please click AUTO DETECT or contact
Turn off the Wi-Fi on your computer and connect it to the router your ISP (Internet Service Provider) for help.
via an Ethernet cable.
http://mwlogin.net
Wireless
A. Find the product label at the bottom of New Password:
the router.
AX1500 Dual-Band Wi-Fi 6 Router

Connect your devices to the router via an Ethernet or wirelessly.


Model: MR60X S/N:XXXXXXXXXXXXXX EU/1.0
Power: 12V 1A
Default Access: mwlogin.net

B. Use the default network name (SSID) MAC:XX-XX-XX-XX-XX-XX Confirm Password: Note: If you have changed the SSID and wireless password during the configuration, use
and password to join the network. Wireless Password/PIN: XXXXXXXX
SSID:MERCUSYS_XXXX the new SSID and wireless password to join the wireless network.
SSID:MERCUSYS_XXXX_5G
Note: MERCUSYS TECHNOLOGIES CO., LTD.
3rd Floor, Building R1-B, No. 23, Gaoxin 4th Road, South Hi-Tech Park, Nanshan, Shenzhen, P.R.China
1. Some models do not require a password. Please use Let’s Get Started
the Wi-Fi information on the label to join the default
network.
2. If you are using a smartphone or tablet, you can also
scan the QR code on the product label to join the preset
network directly. Only certain models have QR codes.
Access Point Mode Range Extender Mode (if supported) WISP Mode (if supported)
In this mode, the router transforms your existing wired network to a In this mode, the router boosts the existing wireless coverage in your home. In this mode, the router connects to the ISP network wirelessly in areas
wireless one. Note: Supported modes may vary by router model and software version. without wired service.
Note: Supported modes may vary by router model and software version.

1. Configure
A. Place the router next to your host router and power it on.
B. Connect a computer to the router via an Ethernet cable or wirelessly by
using the SSID (network name) and Wireless Password (if present) printed
Internet Ethernet1Ethernet2 Ethernet3Ethernet4

Internet Ethernet Ethernet4

on the label at the bottom of the router.


WAN
LAN WAN POWER RESET/WPS

Wired Router Router Devices


LAN WAN POWER RESET/WPS

C. Launch a web browser and enter http://mwlogin.net in the address bar. Public Wi-Fi Router Devices
Create a password to log in.
A. Power on the router.
D. Go to Advanced > Operation Mode or Advanced > System > Operation
B. Connect the router's WAN port to your wired router’s Ethernet port via Mode to switch to Range Extender Mode. Wait for the router to restart. A. Power on the router.
an Ethernet cable as shown above.
E. Use http://mwlogin.net to log in to the web management page and follow B. Connect a computer to the router via an Ethernet cable or wirelessly by
C. Connect a computer to the router via an Ethernet cable or wirelessly by the step-by-step instructions to set up the internet connection. using the SSID (network name) and Wireless Password (if present)
using the SSID (network name) and Wireless Password (if present) printed on the label at the bottom of the router.
printed on the label at the bottom of the router.
2. Relocate C. Launch a web browser and enter http://mwlogin.net in the address bar.
D. Launch a web browser and enter http://mwlogin.net in the address bar. Create a password to log in.
Place the router about halfway between your host router and the Wi-Fi
Create a password to log in.
“dead” zone. The location you choose must be within the range of your D. Go to Advanced > Operation Mode or Advanced > System >
E. Go to Advanced > Operation Mode or Advanced > System > existing host network. Operation Mode to switch to WISP Mode. Wait for the router to restart.
Operation Mode to switch to Access Point Mode. Wait for the router to
E. Use http://mwlogin.net to log in to the web management page and
restart.
follow the step-by-step instructions to set up the internet connection.
F. Use http://mwlogin.net to log in to the web management page and Host Network Extended Network

follow the step-by-step instructions to set up the internet connection.


LAN WAN POWER RESET/WPS

Host Router Router Devices

Button Explanation FAQ (Frequently Asked Questions)


Mercusys routers have different buttons, refer to the following explanation Q1. What can I do if the login window does not appear? Q4. What can I do if I forgot my web management password?
to use the button based on your actual model. • Reboot your router and try again. • Log in to the web management page of the router, click Forgot Password, and
• If the computer is set to a static IP address, change its settings to obtain an IP then follow the instructions on the page to create a password for future
If the button on your router is like this, you can use this button to reset
address automatically. logins.
your router to factory default settings.
• Verify that http://mwlogin.net is correctly entered in the web browser. • Press and hold this button for more than 5 seconds, release the button, and
there will be an obvious change of the LED.
Press and hold this button for more than 5 seconds, release the button, • Use another web browser and try again.
Reset
and there will be an obvious change of the LED. • Disable and enable the network adapter in use again.
Q2. What can I do if I cannot access the internet?
If the button on your router is like this, you can use this button to establish MERCUSYS hereby declares that the device is in compliance with the essential requirements and other

WPS connection, and reset your router to factory default settings. • Reboot your router and try again. relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.mercusys.com/en/ce
• For cable modem users, reboot the modem first. If the problem still exists, log in to MERCUSYS hereby declares that the device is in compliance with the essential requirements and other
the web management page of the router to clone MAC address. relevant provisions of the Radio Equipment Regulations 2017.
Reset: The original UK Declaration of Conformity may be found at https://www.mercusys.com/support/ukca/
Press and hold this button for more than 5 seconds, release the • Check if the internet is working properly by connecting a computer directly to the
©2021 Mercusys 7107500190 REV3.0.1

· Keep the device away from water, fire, humidity or hot environments.
button, and there will be an obvious change of the LED. modem via an Ethernet cable. If it is not, contact your internet service provider. · Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Open a web browser, enter http://mwlogin.net and run the Quick Setup again. · Do not use any other chargers than those recommended.
· Do not use damaged charger or USB cable to charge the device.
Q3. What can I do if I forgot my wireless network password? · Do not use the device where wireless devices are not allowed.
WPS/Reset WPS:
Press this button, and immediately press the WPS button on your • Connect to the router via a wired or wireless connection. Log in to the web · Adapter shall be installed near the equipment and shall be easily accessible.

client device to start the WPS process. The LED of the router should management page of the router to retrieve or reset your password. For technical support, replacement services, user guides, and other
change from blinking to solid on, indicating successful WPS • Refer to FAQ > Q4 to reset the router, and then follow the instructions to configure information, please visit https://www.mercusys.com/support/.
connection. the router.

You might also like