VERTICAL MACHINING CENTER

DOUBLE COLUMN
MACHINING CENTER
Ningbo Haitian Precision Machinery Co., Ltd. Haitian Precision Machinery (HONGKONG) Co., Ltd.
H.Q.& Production Base1 Office Address:
No. 1688 Haitian road, Xiaogang, Beilun, Ningbo-315801, China. Unit,12/F, Seabright Plaza, 9-23 Shell Street, North Point, HONGKONG. V180 / VMCII / GU(e)II PLUS
Tel: +86-574-86182580/86182525
E-mail: [email protected]

Production Base2 Website:

No.235, Huangshan Road,Beilun District, Ningbo-315801 China. www.haitianprecision.com
Production Base3
No.188, Baodao Road, Lingang Industrial Zone, Changxing Island,
Dalian-116317 China.

NEW 2023-EN-V-A The text description, pictures and technical parameters in the sample are for reference only, and the changes
due to technological development are subject to change without notice.
 » VERTICAL MACHINING CENTER/DOUBLE COLUMN MACHINING CENTER 01 | 02

VERTICAL MACHINING CENTER

PRODUCT INTRODUCTION DOUBLE COLUMN MACHINING CENTER
VMCII series vertical machining center is a new GUII products inherit the advantages of gantry
upgrade on the basis of VMC, designed to create structure and market demand on the basis of a new
a cost-effective classic products. The products hard rail ram structure, so that the advantages of
Gantry vertical machining center and traditional
are widely used in auto parts, construction
C-type vertical machining center further expand, to
machinery and other general industry .
bring new experience for customers. The product V-180
is suitable for construction machinery, auto parts,
[Page 07]

VMC760 II
molds, plastic machinery , etc.
[Page 07]

VMC850 II [Page 07]

VMC1000 II [Page 07]

VMC1200 II [Page 07]

VMC1300 II [Page 07]

GU5 II PLUS [Page 08]

GUe5 II PLUS [Page 08]

GU6 II PLUS [Page 08]

GUe6 II PLUS [Page 08]

 » VERTICAL MACHINING CENTER/DOUBLE COLUMN MACHINING CENTER 03 | 04

VMCII VMCII
The new generation of VMC II series uses high-strength cast iron materials and adopts the large-span bed Tool Change
base and column structure to provide a solid foundation and stable performance for the machining tools. Stability
Equipped with mature spindle system and feed system, ensure the stability and reliability of the machine Standard gas storage tank, so
tool. Fully closed and capped protection, providing a good environment for operation. that the machine's gas path is
not affected by the factory's
external air source, so as
to improve the stability of
spindle tool change.
Diversified
Chip Removal
Diversified chip removal
Pressure
switch
Spindle

methods to meet the

Air supply

Full Enclosure More Intelligent Design different needs of

customers.
Full enclosure with the top cover: Gravity axis power-off & emergency stop lifting: Pneumatic
triplet Air receiver

the gravity axis lifting protection function is added to

optimized and upgraded, no oil leakage,
prevent the spindle from colliding with the workpiece
water leakage, leakage chips. under the power-off&emergency stop condition. Manual drain valve
ATC
Cylinder

Tool magazine protection: Abnormal load detection function:

Equipped with tool magazine protection, anti-collision protection function is added to the
reduce the risk of iron filings entering the machine tool to reduce the damage to the spindle.
tool sleeve, improve the stability of the Intelligent tool preparation mode:
machine tool. the tool magazine has the function of tool preparation
in advance, preparing the next tool while processing,
shortening the non processing time and improving
the processing efficiency.

High Rigidity Design

The bed and column has a large span,
and all parts are made of high-quality
cast iron to achieve superior shock
ab s or ption p e rfo r m a n ce, su p p o r t
rigidity and excellent stability.
 » VERTICAL MACHINING CENTER/DOUBLE COLUMN MACHINING CENTER 05 | 06

GU(e)II PLUS GU(e)II PLUS

Arm Type Magazine
The product inherits the strong rigidity, symmetrical structure and high stability of traditional gantry
machine tools. Through finite element analysis, it optimizes the structure of basic components, improves
(Option)
the dynamic performance of the product, and obtains the perfect combination of high power, high torque,
It is equipped with 24T tool magazines,
high efficiency and high precision.
which are stable in action and fast in
tool change, so as to prevent the risk of
iron filings entering the tool sleeve and
improve the stability of the machine
tool. Centralized
Maintenance
Pneumatic and lubrication
are centrally configured
externally for daily
observation, management
Built In Motor Spindle Small Extension Of and maintenance.
Unit (GUeII PLUS) Spindle Head
The built-in spindle is directly driven The cross section of the beam adopts a
by the built-in motor to achieve "zero stepped structure. The extension from
transmission" of the machine tool. the spindle center to the Z-axis guide rail
Star delta automatic switching is is small, and the accuracy and stability
adopted to realize low speed, high are good.
torque and high speed, high power.

Integrated Gantry Frame

Integrated gantry frame structure, the whole
workbench is always moving within the gantry
frame, with symmetrical structure, strong rigidity
and high accuracy and stability.
 » VERTICAL MACHINING CENTER/DOUBLE COLUMN MACHINING CENTER 07 | 08

V-180 / VMCII GU(e)II PLUS

Items Unit V-180 VMC760II VMC850II VMC1000II VMC1200II VMC1300II Items Unit GU5II PLUS GUe5II PLUS GU6II PLUS GUe6II PLUS

» Machining Capacity » Machining Capacity

X travel mm 500 760 850 1000 1200 1300 X travel mm 1300 1300 1500 1500

Y travel mm 400 400 500 600 600 650 Y travel mm 700 700 850 850
Z travel mm 330 500 500 600 600 650 Z travel mm 700 700 700 700
Spindle nose to table Distance between columns mm 1570 1570 1670 1670
mm 150-480 150-650 150-650 150-750 150-750 150-800
surface
» Table Spindle nose to table surface mm 205-905 150-850 205-905 150-850

Table size mm 650×400 900×400 1000×500 1200×600 1300×600 1500×650 » Table

Table load kg 255 300 600 800 600 1200 Table size mm 1400×700 1400×700 1500×850 1500×850

T slot mm 14×125×3 3×18×125 5×18×80 5×18×100 5×18×100 5×18×125 Table load kg 2000 2000 3000 3000

» Spindle T slot mm 5×18×150 5×18×150 5×18×160 5×18×160

Drive type Direct drive Belt drive Belt drive Belt drive Belt drive Belt drive » Spindle
Max Spindle speed rpm 20000 8000 8000 8000 8000 8000 Drive type Gear box Built-in spindle Gear box Built-in spindle

Spindle power kW 3.7/5.5 5.5/7.5 7.5/11 7.5/11 7.5/11 7.5/11 Max Spindle speed rpm 6000 6000 6000 6000

Spindle torque N.m 11.7/17.5 35/47.7 35.8/70 35.8/70 35.8/70 35.8/70 Spindle power kW 15/18.5 15/18.5 15/18.5 15/18.5

Spindle taper BT30 BT40 BT40 BT40 BT40 BT40 Spindle torque N.m 316/522 182/224 316/522 182/224

Pull stud MAS-P30T-1 P40T - I -MAS403 P40T - I -MAS403 P40T - I -MAS403 P40T - I -MAS403 P40T - I -MAS403 Spindle taper BT50 BT50 BT50 BT50

» Feed Rate Pull stud P50T-II-MAS403 P50T-II-MAS403 P50T-II-MAS403 P50T-II-MAS403

Rapid traverse (X/Y/Z) m/min 48/48/48 36/36/36 36/36/36 36/36/36 36/36/36 30/30/20 » Feed Rate
Cutting feedrate (X/Y/Z) m/min 30/30/30 15/15/15 15/15/15 15/15/15 15/15/15 12/12/10 Cutting feedrate (X/Y/Z) m/min 24/24/15 24/24/15 24/24/15 24/24/15
» Tool Magazine Rapid traverse (X/Y/Z) m/min 12/12/10 20/20/10 12/12/10 20/20/10
Tool magazine capacity T 16 24 24 24 24 24 » Tool Magazine (Option)
Tool magazine type - - Arm type Arm type Arm type Arm type Arm type Tool magazine capacity T 24 24 24 24
Max.tool dia.
mm Φ60 / Φ80 Φ80 / Φ150 Φ80 / Φ150 Φ80 / Φ150 Φ80 / Φ150 Φ80 / Φ150 Tool magazine type - Arm type Arm type Arm type Arm type
(Adjacent vacant)
Max.tool length mm 250 300 300 300 300 300 Max.tool dia. (Adjacent vacant) mm Φ110 / Φ200 Φ110 / Φ200 Φ110 / Φ200 Φ110 / Φ200

Max.tool weight kg 3 8 8 8 8 8 Max.tool length mm 300 300 300 300

Tool change time s 1.6 2.5 2.5 2.5 2.5 2.5 Max.tool weight kg 20 20 20 20

» Other » Other
Power capacity kVA 15 25 30 30 30 30 Power capacity kVA 40 40 40 40

Machine weight t 2.5 5.5 6 6.5 7 9 Machine weight t 13 13 14.6 14.6

Machine size(L×W×H) cm 162×208×238 230×325×255 250×340×255 280×355×270 315×355×270 335×370×295 Machine size(L×W×H) cm 390×400×430 390×400×430 400×420×430 400×420×430

Standard Configuration Standard Configuration

V180 VMC II 1. Controller:Controller: FANUC 0i MF PLUS 7. Full enclosure without top cover
1. Controller:M80B 7. Rigid tapping 1. Controller: Mitsubishi M80B 7. Full enclosure with top cover 2. Spindle oil chiller 8. 3-color signal lamp, working light
2. Spindle air blow 8. Direct drive spindle 20000rpm 2. 8000rpm belt drive spindle 8. Air gun 3. Pneumatic,hydraulic and lubrication system 9. Standard accessories
3. Spindle air seal 9. 16T disc type ATC 3. 24T ATC 9. 3-color signal lamp, working light
4. Spindle oil chiller 10. 3-color signal lamp,working light 4. Pneumatic and lubrication system 10. Standard accessories 4. Cutting cooling 10. Z axis hydraulic balancing system(only for GUII PLUS)
5. Pneumatic and lubrication system 5. Cutting cooling 5. Internal helix chip conveyor 11. 6000rpm HISION built-in spindle(only for GUeII PLUS)
6. Coolant system 6. Internal water flooding chip conveyor
6. External chain type chip conveyor and trolley
 » VERTICAL MACHINING CENTER/DOUBLE COLUMN MACHINING CENTER 09 | 10

Manufacturing Base

Overseas Subsidiary

Overseas Market

MORE THAN PRECISION

Ningbo Haitian Precision Machiner y Co., Ltd. is a listed company
specializing in machine tooling industry. It has developed Ningbo Dagang
production base, Ningbo Yanshan production base and Dalian production
base. It has a modern constant temperature processing and assembly
plant of over 300,000 square meters with nearly 1900 employees. It
is awarded honors such as “national major technical equipment
enterprise”, “national high-tech enterprise”, and “provincial high-tech
research and development center”.