Powerful, maintenance-free

3-phase AC drive motor

Manoeuvrable and compact

Sensitive lifting

Comfortable operation

EJC 110/112
Electric pedestrian controlled truck (1,000/1,200 kg)

The strength of the EJC series 1 pedestrian stackers lies in Operators can take advantage of the precise raising and gentle
transporting over short distances and stacking and retrieving lowering of loads (optional with EJC 110). Gentle stacking of
up to 4700 mm high. Due to its narrow width, the EJC can large loads is made possible by the controlled lifting motor and
be manoeuvred particularly easily and safely even in confined the handy buttons on the tiller arm.
spaces.
The EJC 110/112 draw their required energy from batteries with
There is also the option to move the truck in crawl speed mode capacities of up to 200 Ah. An integrated and moisture/dust-
with the tiller in the upright position. resistant battery charger (optional) allows simple recharging of
the battery at any 230 V socket. This charger is also optionally
The 3-phase AC drive motor achieves optimum efficiency available with a rapid charging function.
combined with the electronic controller developed by us. This
enables us to achieve outstanding performance with low energy Practical storage compartments on the dashboard and on the
consumption – the best conditions for rapid and efficient goods front of the truck ensure that all the tools and equipment you
throughput. may need, such as pens, knives or documents, are within easy
reach.
EJC 110/112

c
h₄ Q
h₁ h₃

h₁₄
max. l
h₁₄ x
min.
900

35 s h₂

l₂ m₂ h₁₃
170 y
l₁

Ast
a
Wa
l₆ 2

e
R
b₁ b₁₀ b₁₁ b₅ b₁₂

a a
2 2
(Ast)

Standard mast designs EJC 110/112

Lift Lowered mast height1) Free lift Extended mast height
h3 h1 h2 h4
(mm) (mm) (mm) (mm)
EJC 110 EJC 112 EJC 110 EJC 112 EJC 110 EJC 112
Duplex ZT 2500 1750 1750 100 100 2975 2975
2700 1850 1850 100 100 3175 3175
2900 1950 1950 100 100 3375 3375
3200 2100 2100 100 100 3675 3675
3600 2300 2300 100 100 4075 4075
4100 - 2550 - 100 - 4575
4300 - 2650 - 100 - 4775
Duplex ZZ 2500 1700 1700 1225 1225 2975 2975
2900 1900 1900 1425 1425 3375 3375
3200 2050 2050 1575 1575 3675 3675
3600 2250 2250 1775 1775 4075 4075
4100 - 2500 - 2025 - 4575
4300 - 2600 - 2125 - 4775
Triplex DZ 4090 1845 1845 1338 1338 4597 4597
4300 1915 1915 1408 1408 4807 4807
4700 - 2050 - 1543 - 5212
1) with 100 mm free lift
 Issue: 07/2014

Technical data in line with VDI 2198

1.1 Manufacturer (abbreviation) Jungheinrich
1.2 Model EJC 1103) EJC 1123)
Identification

1.3 Drive Electric

1.4 Manual, pedestrian, stand-on, seated, order picker operation pedestrian
1.5 Load capacity/rated load Q t 1 1.2
1.6 Load centre distance c mm 600
1.8 Load distance x mm 681 688
1.9 Wheelbase y mm 1,184 1,191
2.1.1 Net weight incl. battery (see row 6.5) kg 750 830
Weights

2.2 Axle loading, laden front/rear kg 570 / 1,180 650 / 1,380

2.3 Axle loading, unladen front/rear kg 510 / 240 580 / 250
3.1 Tyres PU
Wheels / frame

3.2 Tyre size, front mm Ø 230 x 70

3.3 Tyre size, rear mm Ø 77 x 75 Ø 85 x 110
3.4 Additional wheels (dimensions) mm Ø 150 x 54 Ø 140 x 54
3.5 Wheels, number front/rear (× = driven wheels) 1x +1/2 or 4
3.6 Tread width, front b10 mm 507
3.7 Tread width, rear b11 mm 415 400
4.2 Mast height (lowered) h1 mm 1,950
4.3 Free lift h2 mm 100
4.4 Lift h3 mm 2,900
4.5 Extended mast height h4 mm 3,375
4.9 Height of tiller in drive position min. / max. h14 mm 850 / 1,305
Basic dimensions

4.15 Height, lowered h13 mm 90

4.19 Overall length l1 mm 1,822
4.20 Length to face of forks l2 mm 672
4.21 Overall width b1/b2 mm 800
4.22 Fork dimensions s/e/l mm 56 / 185 / 1,150
4.25 Width across forks b5 mm 570
4.32 Ground clearance, centre of wheelbase m2 mm 30
4.33 Aisle width for pallets 1000 × 1200 crossways Ast mm 2,0712)
4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 2,1211)
4.35 Turning radius Wa mm 1,402 1,409
5.1 Travel speed, laden/unladen km/h 6/6
Performance

5.2 Lift speed, laden/unladen m/s 0.12 / 0.22 0.13 / 0.22

data

5.3 Lowering speed, laden/unladen m/s 0.33 / 0.33 0.43 / 0.37

5.8 Max. gradeability, laden/unladen % 8 / 16
5.10 Service brake regenerative
6.1 Drive motor, output S2 60 min. kW 1.0
6.2 Lift motor, output at S3 10% kW 1.7 0
6.2 Lift motor, output at S3 (on time) 12% kW 0 2
Electrics

6.3 Battery as per DIN 43531/35/36 A, B, C, no British Standard

6.4 Battery voltage/nominal capacity K5 V/Ah 24 / 200
6.5 Battery weight kg 185
6.6 Energy consumption as per EN 16796 kWh/h 0.61 0.66
CO- Equivalent as per EN 16796 kg/h 0.3 0.4
Misc.

8.1 Type of drive control AC speedCONTROL

8.4 Sound pressure level at operator's ear as per EN 12053 dB (A) 62

1) Diagonal as per VDI: + 137 mm

2) Diagonal as per VDI: + 212 mm
3) Values for 290 ZT standard mast with battery
In accordance with VDI Guideline 2198, this data sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may result in dif-
ferent values.
Benefit from the advantages

Excellent view of the load for pre- Good storage options for pens, The support wheel is easy to
cise positioning tools and documents replace, lowering maintenance
costs

Innovative drive and control tech- • Less noise produced with slow lifting Fully informed at all times
nology via lift control. The 2-inch display (optional) as the main
Greater performance while simulta- display and setting instrument offers user
neously reducing operating costs using Practical storage compartments control at a glance:
three-phase AC motors with perfect The EJC 110/112 offer plenty of storage • Battery charge status, number of oper-
match to the controller developed in space for keeping tools and equipment: ating hours and event messages.
house by Jungheinrich. The advantages • Paper compartment in the front panel. • Choice of 3 travel programs.
are: • Storage compartments in the dash- • Activation of the truck by EasyAccess
• High efficiency levels with excellent board panel. via softkey, PIN code transponder card
energy management. • Clip pad (in combination with the (optional).
• Powerful acceleration. optional metal cover).
• Rapid direction change. Additional equipment
• Maintenance-free drive motor. Service-friendly technology • CanDis: Discharge indicator and hour
• Service access ports in the front apron meter.
Manoeuvrable and compact allow solid tyres to be changed quickly. • CanCode: Access control via PIN.
Due to the short aisle width, optimum • Support wheel with bayonet mech- • Load guard.
use is also possible without difficulty, anism enables wheels to be changed • Connection option e.g. for terminal,
even in confined spaces. If necessary, it is with the truck only slightly raised. scanner or printer.
possible to continue working safely with • Tiller electronics sealed to protect • Particularly robust metal battery lid for
the tiller upright and the crawl speed against moisture and dirt as per IP 65. heavy-duty applications.
button pressed. • Electronic controls and built-in charger • Cold store version.
(optional) sealed to protect against
Precise and comfortable stacking and moisture and dirt as per IP 54. Lithium-ion technology
retrieval • High degree of availability thanks to ex-
Especially safe and efficient stacking and Long operating period with lead-acid tremely short charging times.
retrieval due to: battery • No battery exchange required.
• Precise and gentle lifting of the load by • Long service life with battery capacities • Cost savings due to longer service life
means of speed-controlled hydraulic up to 200 Ah. and low maintenance compared with
motor. • Built-in battery charger (optional) for lead-acid batteries.
• Gentle depositing of the load via straightforward charging at any stan- • No charging rooms and ventilation
2-stage lowering speed (EJC 110) dard 230-V socket (also available with required as there is no build up of gas.
and proportional hydraulics (EJC 112, rapid charging function for charging • Longer service life with 5-year
optional with EJC 110). within a shift). Jungheinrich guarantee.
• Long safety tiller provides sufficient
distance between operator and truck.
T_EJC 110/112_022018_en_UK_000

Jungheinrich UK Ltd. The German production

facilities in Norderstedt,
Moosburg and Landsberg
Head Office: are certified.
Sherbourne House
Sherbourne Drive
Jungheinrich fork lift
Tilbrook trucks meet European
Milton Keynes MK7 8HX safety requirements.

Telephone 01908 363100

Fax 01908 363180

[email protected]
www.jungheinrich.co.uk