TITAN ATF 6000 SL
Uploaded by
Vladimir ShestTITAN ATF 6000 SL
Uploaded by
Vladimir ShestTITAN ATF 6000 SL
Premium Performance ATF offering maximum performance in passenger car
applications such as automatic transmissions with torque converters or wet clutches
as well as power steering systems. Formulation is licensed according to DEXRON VI
and downwards compatible to any former DEXRON-specification.
Description Advantages/Benefits
TITAN ATF 6000 SL reflects one of the most modern • outstanding friction performance and -stability
concepts of an Automatic Transmission Fluid (ATF) • Enhanced shifting performance in older as well as
and fulfils highest demands for ATFs as defined in modern gearboxes
the brand new specification DEXRON VI by GM. • Constant shifting quality over whole lifetime of the
With beginning of 2006 General Motors activated gearbox
DEXRON VI, which replaced all former DEXRON • Improved wear protection and consequently longer
specifications (TASA, B, II(D), II(E), III…) by end of lifetime of the aggregate
2007. Due to the fact that DEXRON VI is strictly • Higher oxidation stability, thus higher ageing
downwards compatible in GM applications – which stability
means fully applicable even in older aggregates • “fill-for-life“-oil, e.g. developed for maximum drain
demanding former DEXRON specifications – TITAN intervals (up to 250.000 km)
ATF 6000 SL already now is very attractive with
regards to product rationalization. Specifications
• -
Application
Approvals
TITAN ATF 6000 SL is recommended for step-type-
automatic transmissions and accessory aggregates • DEXRON VI
such as power steering in passenger cars, vans and • VOITH H55.6335.xx
light trucks. The switch to TITAN ATF 6000 SL is • ZF TE-ML 09
possible even with older aggregates. Manufacturer’s
advice has to be respected. TITAN ATF 6000 SL is FUCHS Recommendations
miscible and compatible with conventional branded
gear oils. However, mixing with other gear oils • BMW 81 22 9 400 272
should be avoided in order to fully utilize the • BMW 81 22 9 400 275
product’s benefits. A complete oil change is • BMW 81 22 9 407 738
recommended when converting to TITAN ATF 6000 • BMW 83 22 0 397 114
SL. For information on product safety and proper • BMW 83 22 0 403 248
disposal please refer to the latest Material Safety • BMW 83 22 0 403 249
Data Sheet. • BMW 83 22 0 432 807
• BMW 83 22 9 407 858
• BMW 83 22 9 407 859
PI60013e, PMA, 11.07.2013, Page 1
TYPICAL CHARACTERISTICS
Density at 15 °C DIN 51757 0.845 g/ml
Colour DIN ISO 2049 Red ASTM
Flash Point, CoC DIN ISO 2592 205 °C
Pour Point DIN ISO 3016 -52 °C
Foaming Tendency Seq. I/II/III ASTM D 892 5/0 ml
Dynamic Viscosity at - 40°C DIN 51398 12,000 mPas
Kinematic Viscosity at 40°C DIN 51562-1 30,6 mm²/s
Kinematic Viscosity at 100°C DIN 51562-1 6.1 mm²/s
Viscosity Index DIN ISO 2909 152
PI60013e, PMA, 11.07.2013, Page 2
The information contained in this product information is based on the experience and know-how of FUCHS
EUROPE SCHMIERSTOFFE GMBH in the development and manufacturing of lubricants and represents the
current state-of-the-art. The performance of our products can be influenced by a series of factors, especially the
specific use, the method of application, the operational environment, component pretreatment, possible external
contamination, etc. For this reason, universally-valid statements about the function of our products are not
possible. The information given in this product information represents general, non-binding guidelines. No
warranty expressed or implied is given concerning the properties of the product or its suitability for any given
application.
We therefore recommend that you consult a FUCHS EUROPE SCHMIERSTOFFE GMBH application engineer
to discuss application conditions and the performance criteria of the products before the product is used. It is the
responsibility of the user to test the functional suitability of the product and to use it with the corresponding care.
Our products undergo continuous improvement. We therefore retain the right to change our product program,
the products, and their manufacturing processes as well as all details of our product information sheets at any
time and without warning, unless otherwise provided in customer-specific agreements. With the publication of
this product information, all previous editions cease to be valid.
Any form of reproduction requires express prior written permission from FUCHS EUROPE SCHMIERSTOFFE
GMBH.
