THIENNAM OFFSHORE SERVICES JSC

# 59, 30/4 St., Thang Nhat Ward, Vung Tau City, Viet Nam S.R
Tel.: 84 (64) 3595716; Fax: 84 (64) 3560881
E-mail: [email protected]

TOS HA LONG: PIPELAY/ ACCOMMODATION/ HEAVY LIFT/ CONSTRUCTION/ P&A/

INTERVENTION/ SAT, AIR, ROV DIVING BARGE.

TOS HA LONG is a Derrick /Pipe-lay GENERAL

barge tender with a deck area of 1.664 m2 Year built : 2008
and accommodation for 248 men Place of built : China
Flag / Port of registry : Viet Nam / Sai Gon
Registry # : SG-OTH-002813-2
This barge is suitable for offshore IMO # : 8673308
operations such as: Callsign : XVGC7
Classification : ABS / VR
Pipe-laying barge Notation : ✠ A1 Barge
Accommodation / Flotel Descriptions : Accommodation / Pipe-laying barge / Drilling tender
Barge / MODU / Heavy lift/ Diving Barge.
Heavy lift crane barge Email : [email protected]
Offshore operations support VSAT tell : +84964729039
SAT / ROV / Air diving support PRINCIPAL DIMENSIONS / TECHNICAL
Plug and Abandon (P&A), intervention Length overall : 113.08 m
Breadth moulded : 28.50 m
operations.
Depth moulded : 7.30 m
Inspection / Repair / Maintenance Loaded draft : 4.62 m
Riser installation GT/NT : 11.563 / 3.468 T
DWT : 9.954 T
Cable and umbilical installation Moonpool : 5.09 m x 4.28 m, with skidding system
MODU code (1989) compliance Helideck compliance : ICAO annex-14 and UK CAP-437 guidelines
D-value : 23 m
T-value : 12.8 T

STORAGE CAPACITIES
Fuel (full capacity) : 978 m3
Portable fresh water : 2.471 m3
Drill Water / Mud / Brine (optional) : 450 m3
Ballast Water : 10435 m3

ACCOMMODATION (full air conditioned)

1-man cabin x 6 : 06 cabins
2-men cabin x 13 : 26 cabins
4-men cabin x 54 : 216 cabins
Total : 248 men

Note: The information shown is given in good faith without any warranties or condition; express or implied, statutory, or otherwise
 THIENNAM OFFSHORE SERVICES JSC
# 59, 30/4 St., Thang Nhat Ward, Vung Tau City, Viet Nam S.R
Tel.: 84 (64) 3595716; Fax: 84 (64) 3560881
E-mail: [email protected]

TOS HA LONG: PIPELAY/ ACCOMMODATION/ HEAVY LIFT/ CONSTRUCTION/ P&A/

INTERVENTION/ SAT, AIR, ROV DIVING BARGE.

POWER SUPPLY FFE & LSA

Main genset : 6 x 500 kW @ 1,500 rpm, 400 VAC, 3
ph, 50 Hz, Caterpillar CAT-3412C
Emergency generator : 1 x 95 kW @ 1500 rpm, 400VAC, 50 Chemical foam : 1 x 1,000 ltrs capacity
Hz, Caterpillar C4.4 Portable extinguishers : 73 nos (foam, CO2, DP)
Mooring winch HPU : 8 x 367 kW @ 1,800 rpm,driven by AB Smoke detectors : Available
Volvo Penta TAD1241GE Sprinkle system : Available
Self-inflatable liferafts : 30 x 25 men liferaft
LIFTING EQUIPMENT Life jackets : 510 nos
Main crane Rescue Boat : 1 x 25HP
Pedestal crane : FAVELLE FAVCO PC250 300T Breathing apparatus : 9 nos
54.00 m boom length Air compressors : 500 cfm @ 10 bar
Main hoist : 300 MT @ 12 m radius, 6 falls
Auxiliary hoist : 30 MT @ all radius, 2 falls RIGLESS INTERVENTION SYSTEM (Optional)
Heave compensation 200T (optional) Rigless abandonment & intervention system (RAIS)
Second crane : 1 x SEATRAX S7720 The RAIS is designed primarily for:
60.50 T @ 7.00 m - Well repair and abandonment.
- Well bore tubular extraction
DECK LOADING CAPACITY - Conductor pre-installation
Deck loading capacity : 10 MT/m2 - To set the new casing
Clear deck area : 960 m2 - Decommissioning
Covered work area : 704 m2 Max. pulling capacity : 320 Te
Total deck : 1.664 m2 Max. height under hook : 30.90 m
PIPE-LAY CAPACITY Operating temperature : 0oC – 45oC
Hydraulic pipeline up station with transverse and longitudinal conveyors Max. wind speed : 50 mph
Rollers ramp : 16 x V shape rubber coated roller Survival wins speed : 100 + mph
Welding stations : 5 stations (manual or automatic) Mast assembly wind : 35 mph
NDT station : 1 station speed
Coating station : 1 station Zone rating : Zone 1 (Hydraulic power unit zone 2)
Fixed stinger : 31.7 m x 3 m equipped with V shape Sub-assemblies : - Mast
roller and 17.3 m extend stinger - Long travel skidding
SAS tensioning : 2 x 60 MT independent - Main beam
Coated pipe OD range : 4” – 60” - Lift tower
SAS A&R winch : 1 x 120 MT - Sub structures (Winch, cross
Pipe lift davits (optional) : N/A travel claws, horizontal transfer)
Welding machines(optional) : 12 x 425A - HPU, Generator
Certifications : API, DNV-GL, ABS as required
ANCHOR AND MOORING SYSTEM Documentation : Manufacturer data book (MDB), User
Anchor winches : 8 x 70 MT hydraulic winches manual (UM)
150 MT brake capacity Speed of rig up/down : ≤ 12 hrs
Mooring lines : 8 x Ø52 mm x 1400-1.500 m Generator & HPU : Provides all electric and hydraulic
Anchor : 10 x 12 T delta flipper anchor power
Supports cutting & : 30 m of pipe
SERVICE PUMP AND MISCELLANEOUS OTHERS pulling
Fuel oil : 36 m3/hr @ 60 m head Onboard lifts : Components are within capacity of most
Fresh water : 66 m3/hr @ 60 m head offshore platform crane
Centrifugal ballast pump : 2 x 360 m3/hr @ 30 m head Pre-reeved Crown, : Avoids manual reeving of rope
Fresh water maker : 2 x 50 TPD R.O plant Winch & Travelling
Sewage treatment plant : 2 x 150 men, Biomaster Block
Remote Hydraulic : Avoids any work at height
NAVIGATION & COMMUNICATION EQUIPMENT
Pinning
GPS satellite navigator : 1 set x FURUNO GP-37
Platform Layouts : Flexible arrangements
Echo sounder : 1 set x FURUNO FCV-620
Tubular
NAVTEX receiver : 1 set x FURUNO NX-700
Drill pipe : 3-1/2” S135 Grade, plastic coated DP
Daylight signaling lamp : To be supplied
3-1/2” S135 Grade DP
Radar : 1 set x FURUNO FR-1510 RDP-119
5” S135 Grade DP
VHF Airband transceiver : 1 set x ICOM IC-A200
6-5/8” HWDP
VHF Marine transceiver : 7 sets x ICOM IC-M504
Drill collar : 4-1/2” DC
2-Way VHF radio : 3 Sets x McMurdo R2 & Simrad
6-1/2” DC
VHF Radiotelephone : 2 Sets x Furuno FM-8800S
Drilling equipment
MF/HF Transceiver : 1 Set x Furuno FS-2571C
Top drive : Rotary table ZP375 37-1/2”
AIS : 1 Set x Furuno FA-150
(952.5mm), 23870 ft-lb
Inmarsat C Station : 2 Sets x Furuno Felcom 15
torque at max 300 rpm
EPIRB : 1 Set x McMurdo E5
Power swivel XK-150 max 12000 ft-lb,
SART : 2 Sets x McMurdo S4
150 MT max static load, 160rpm max
Telephone System : 1 Set x Zenitel Marine ACM-E7
Tubular handling : Pipe handling system
Public Address/PAGA : 1 Set x Zenitel Marine ETB/SPA
Hydraulic Iron Roughnecks FH-70 for
NDB : 1 Set x SAC SA-100
tubular range 3-1/2” to 7-1/2”
VSAT : 2 Set
Casing power tong for tubular 4-1/2” –
Fleet Broadband 500 : 2 Set
13-3/8”
FFE & LSA Mud system
Fire pump /GS pumps : 2 x 180 m3/hr @ 120 m head Mud pump : F800 x 02 5000PSI
Water monitor : 2 x foam Shale Shaker : GNZS Linear Motion Shaker
Fire hose : 43 x 20 m length Mud mixing : 2 Tanks net volume 23m3 each
c/w mud agitators, centrifugal pumps
Note: The information shown is given in good faith without any warranties or condition; express or implied, statutory, or otherwise
 THIENNAM OFFSHORE SERVICES JSC
# 59, 30/4 St., Thang Nhat Ward, Vung Tau City, Viet Nam S.R
Tel.: 84 (64) 3595716; Fax: 84 (64) 3560881
E-mail: [email protected]

TOS HA LONG: PIPELAY/ ACCOMMODATION/ HEAVY LIFT/ CONSTRUCTION/ P&A/

INTERVENTION/ SAT, AIR, ROV DIVING BARGE.
Heave compensation system Total system Volume : 40 m3
Crane Master : CM2-150T-3000-A HRF Skid weight : (TARE) 50MT (Single Lift Skid),
Wireline Riser Tensioner : NOV WRT-225 Dedicated Spreader Bar and rigging.
BOP equipment
BOP Rams : 11” 5000 PSI ram preventers INTERGRATED AIR DIVING SYSTEM (Optional)
( 1 pipe ram + 1 VBR + 1 blind shear) - Containerized and air conditioned DCC
BOP Annular : 11” 5000 PSI - 3 x separate diver control panels
IWOCS
Oceaneering IWOCS for controlling wellhead & subsea equipment (LRP, - LARS systems c/w double basket
EDP, TRT, UGB, M70, H4) - Fully air conditioned equipment maintenance, tools and spares
HPU : 35 function (29 LP, 6HP) container
Spooler : 32 cores, 290m length - SRP diver package comes with diving systems
Subsea connector
Cameron Model 70 : 18-3/4” 10000 PSI WP “15T TENSIONER” (Optional)
Collet Connector Max. bending load: 3,645,000 ft-lb Tension Rating : 15 Te;
@ 0 lbs tension. Type : 2 tracks;
Vetco Har H4 Connector : 18-3/4” 10000 psi wp Dimension : 5.4m x 1.55m x 2.95m
Max. Bending load: 5,017,000 ft-lb Weight : 10Te;
@ 0 lbs tension. Maximum Lay Speed : 1200 m/h;
Wellhead connector Product OD : 50 ~ 250 mm
Cutting tool fishing tool Maximum Track Opening : 400 mm
Cutting tool Contact Length : 2500 mm
Cutting tools for casing : 9-5/8”, 13-3/8”, 20”-30” Casing Maximum Tension Grip : 45 Te
size Capable of concurrently cut 3 casing Design friction coefficient : 0.1
sizes 13-3/8”, 20”, 30”. Control Mode : Remote/Local
Fishing tool
Spear and overshot for : 9-5/8”, 13-3/8”, 20” casing “200T REEL SPOOLER” (Optional)
casing sizes 18-3/4” wellhead Max reel weight : 200 Te;
Max reel diameter : 7m
340K HYDRAULIC WORK OVER (HWO) UNIT (Optional) Max board reel : 5m
General Specification: The HWO unit is designed to carry workover Min reel diameter : 4m
operations for onshore as well as offshore environments. The equipment is be Reel speed (1 tower running) : 1 rpm/min ~ 1200 m/h
equipped with four lifting point’s arrangement for horizontal and vertical Reel speed (2 towers running) : 0.5 rpm/min ~ 600 m/h
handling of modules where applicable. Drive mode : Remote
Built : 2022 Dimension : 7.6m x 5.0m x 4.72m
Classed by : ABS/IMCA Weight : 20 Te/ each
Maximum Pull Rating : 340,000 LBS
Stroke Length : 12 FEET MASS FLOW EXCAVATION EQUIPMENT – MFE (Optional)
Rotary Torque : 14,000 FT-LBS This MFE equipment is suitable for operation such as:
Able to handle pipe range : 2.875" TO 9.625” OD - Pipeline & cable trenching
Skid Beam : YES - Free span correction
Ambient temperature : 50degc
Maximum Wind Speed : 60knots - Pipeline de-burial & exposure
Operations : SIMOPS - Rock dump dispersal
Total Lifts : around 58 lifts Quantity : 02 sets
Heaviest Single Lift : 12MT Built : 2015
Propeller speed : 300RPM
HEAVY DUTY CONSTRUCTION CLASS ROV (Optional) Flow Rate : 0 – 6500 lit per second
WROV ‘QUANTUM 3’ & ‘QUANTUM 4’ Operation Water Depths : 7 – 200 m
Built : 2006
Classed by : ABS/IMCA GROUTING EQUIPMENT (Optional)
Depth Rating : 2,000 – 3,000 m Quantity : 02 sets
Capacity : 125 HP Mixing Bowl Skid
Tether : 500m x 35mm or 900m x 27mm Dimension : 1.76m x 1.40m x 2.70m x 2.0Te;
Tool Pumping Capacity : 6 M3 per hour;
CP equipment : Contact, proximity, gradient Capacity : 1.4 ~ 2.4 M3
UT Probe : Cygnus 3000 Bulk Cement Silo
Profiler : Super SeaKing DFP Profiler Dimension : 20ft x 8ft x 8ft x 24 Te;
Torque Tool : Class 1-4 Torque Tool Capacity : 17.5 M3 / 20.5 Te
Water Jet : 0-500 bar high pressure jet Max working pressure : 2.2 bar
Pipe tracker : TSS 440 Turn Table
Outside Diameter : 2.2 m
MODULAR SATURATION DIVING SYSTEM (Optional) Height : 1.8 m
“SAT 10” & “K-SAT 3” Weight : 750 kg
Design type : Portable, Modular, Deck Grout Pump Skid
Built : 2010 Dimension : 3.50m x 1.50m x 1.90m x 1.1Te;
Classed by : ABS Power Pack/Pump Skid : 77 HP
Maximum Working Depth : 200 m
Manning Capacity : 12 Divers “T1000 STEV-TENSIONER” (Optional)
Bell Safe Launch limits : Hs = 4m Model : T1000
Maximum Horizontal load (mT) : 1,000MT
“HYPERBARIC RECEPTION FACILITY” (Optional) Suitable For chain Size with Kenter [mm] : 102 ‐ 117
Maximum Occupation in : 15 Men (12 Diver’s + Medical/Support Suitable for chain size without Kenter [mm] : 102 – 135
System staff) Size (l x w x h) (m) : 3.1 x 0.8 x 1.2
Maximum Storage Depth : 200 MSW Weight (mT) : 6T
Designed Operating : -1 to 55o Celsius / 100% RH
Temp & Humidity
HRU Mating Capacity : One SPHL (Bottom mating);
One HRC/SPHL (Side Mating)
Note: The information shown is given in good faith without any warranties or condition; express or implied, statutory, or otherwise
 THIENNAM OFFSHORE SERVICES JSC
# 59, 30/4 St., Thang Nhat Ward, Vung Tau City, Viet Nam S.R
Tel.: 84 (64) 3595716; Fax: 84 (64) 3560881
E-mail: [email protected]

GENERAL ARRANGEMENT

Note: The information shown is given in good faith without any warranties or condition; express or implied, statutory, or otherwise
 THIENNAM OFFSHORE SERVICES JSC
# 59, 30/4 St., Thang Nhat Ward, Vung Tau City, Viet Nam S.R
Tel.: 84 (64) 3595716; Fax: 84 (64) 3560881
E-mail: [email protected]

Main crane FAVELLE FAVCO SWL 300T LOAD CHART 2nd crane SEATRAX S7220 60T LOAD CHART

Note: The information shown is given in good faith without any warranties or condition; express or implied, statutory, or otherwise