0% found this document useful (0 votes)
189 views28 pages

ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

The ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual provides essential guidelines for safe installation, operation, and maintenance of the water heater. It emphasizes the importance of following safety precautions, using qualified technicians for installation, and adhering to specific electrical and hydraulic connections. The manual also includes technical specifications and recommendations for optimal use and care of the appliance.

Uploaded by

1996.openhouse
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
189 views28 pages

ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

The ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual provides essential guidelines for safe installation, operation, and maintenance of the water heater. It emphasizes the importance of following safety precautions, using qualified technicians for installation, and adhering to specific electrical and hydraulic connections. The manual also includes technical specifications and recommendations for optimal use and care of the appliance.

Uploaded by

1996.openhouse
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 28

23/10/24, 15.

50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Manuals+ — User Manuals Simplified.

ARISTON PRO1 R ABS 80 V Slim Electric


Water Heaters Instruction Manual

Home » Ariston » ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters


Instruction Manual

Contents
1 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters
2 GENERAL WARNINGS
3 INSTALLATION
4 STARTING AND OPERATION
5 MAINTENANCE AND REPAIR WORKS
6 Data plate
7 Serial number
8 Recommendation on the storage water heater installation
9 Water heater device
10 Installation scheme
11 Dimensions
12 Documents / Resources
12.1 References
13 Related Posts

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 1/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters

GENERAL WARNINGS

1. This manual is included in water heater delivery set. It should be kept


alongside the appliance even if the latter is transferred to another user
and/or moved to another location.
2. Read this manual carefully. It provides important safety precautions for ithe
nstallation, use and maintenance of the water heater.
3. The appliance is installed at the expense of the user.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 2/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

4. The use of the appliance for purposes other than those specified is strictly
forbidden. The manufacturer is not to be held responsible for any damage
due to failure to comply with the instructions set in the manual.
5. All installation and maintenance works must be carried out by a qualified
technician in conformity with the current rules and regulations, as well as
the directions provided by the manufacturer.
6. Incorrect installation can cause personal injury and property damage. The
manufacturer is not to be held responsible for damage due to incorrect
installation.
7. Keep all packing material (clips, plastic bags, polystyrene foam, etc.) out of
children’s reach. The packing material is hazardous for health.
8. The appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
9. It is strictly forbidden to touch the appliance barefoot or with wet hands
and/or feet.
10. Repair works should be carried out by a qualified technician using original
spare parts produced by the manufacturer. Failure to comply with this
requirement invalidates all warranties on the part of the manufacturer.
11. The temperature of the hot water is adjusted by a thermostat that acts as a
protection against overheating.
12. Water supply must be done in accordance with paragraph «Hydraulic
Connection».
13. Electric wiring must be done in accordance with paragraph «Electrical
Connection».
14. It is strictly forbidden to modify or replace the safety valve with the other
one which does not meet the current rules and regulations if it is not
included in the delivery set.
15. No inflammable items should be kept near the appliance.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 3/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

16. The water heater is a technically sophisticated electrical appliance for


household purposes. Whenever electrical water heater installation involves
re-equipment
17. Whenever electrical water heater installation involves re-equipment
(rearrangement) of residential and non-residential premises in residential
buildings, installation should be performed only after relevant permissions
have been obtained in a proper manner.
18. The water heater must be transported in a vertical or a horizontal position
(depending on a model) by any covered kind of transport. The water heater
must be fixed securely in order to avoid any possible damage, drift or drop
inside the vehicle.
19. It is forbidden to subject impact loads to the water heater during cargo
handling operations.
20. If it is necessary to grab the box by clips during transportation, it is
recommended to grab the sides of the packaging where the following
symbol is printed
21. In the warehouse, which stores the product, air temperature must be from
+5°C to + 40°C and relative humidity must be less than 80% at +25°C. If
the temperature is lower, there must be no condensation.
22. The product must be stored in containers in storage areas, protected from
exposure to precipitation, in the absence of acids, alkalis and other
impurities vapors.

KEY TO SYMBOLS

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 4/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Symb
Meaning
ol

Failure to comply with this requirement can result in severe injuries


and even death

Failure to comply with this requirement can result in damage to pr


operty, plants, or animals

General requirements and safety precautions for use

GENERAL SAFETY NORMS

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 5/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Re Sym
Warning Risk
f. bol

Electric shock. Burns due to th


e contact with overheated co
Do not open the water heater
1 mponents. Injuries due to the
body
contact with sharp edges or p
rotrusions

Do not start or stop the water


heater by plugging it into or Electric shock in case of cable,
2
out of the wall outlet. Use the plug, or socket damage
power switch for this purpose

Do not use the water heater


Electric shock from live unshe
3 with a damaged power suppl
athed wires under voltage
y cable

Injury from an object falling of


f the appliance due to its vibra
tions
Do not leave anything on top
4 of the appliance Damage to the appliance or a
ny objects underneath it due t
o the object falling off followi
ng vibrations

Injury from the falling applian


ce

Do not climb onto the applia


Damage to the appliance or a
5 nce
ny objects underneath it due t
o the appliance falling off fro
m its place of installation

Before cleaning, isolate the ap Electric shock


pliance from the mains by un
6 plugging it or turning the swit
ch off

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 6/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Install the appliance on a soli


7 d wall that is not subjected to Excessive noise
any vibrations

Make electrical connections u Incorrect conductor section re


sing cables with conductors o sults in cables overheating. It
8
f suitable section may cause fire.

Make sure all control and pro Shutdown or damage of the a


tection functions operate corr ppliance due to out-of-service
9 ectly before start the applianc or unregulated control system
e operation

ADDITIONAL SAFETY RULES

Before water heater handling,


10 Burns
drain hot water

Descale the components in ac


cordance with the instructions Injury due to contact of the ski
provided in the applicable do n or eyes with acidic substanc
cument. Air the room. es, inhalation or swallowing of
harmful chemical agents.
Work is performed in protecti
ve clothing, avoiding mixing d
11 ifferent products. The water h Damage to the appliance or s
eater and surrounding objects urrounding objects due to cor
shall be protected against ing rosion caused by acidic substa
ress of cleansers nces

Do not use any insecticides, s


Damage to the plastic and pai
12 olvents or aggressive deterge
nted parts
nts to clean the appliance

Congratulations on your purchase of an electric water heater manufactured by


Ariston Thermo Group. The appliance is designed in compliance with
European quality standards and conforms to declared technical characteristics.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 7/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

The water heater is easy to use; it demonstrates great consumer properties


and durability in operation. We hope that you will be satisfied with its work.
Please, read this manual carefully to ensure the proper installation and
operation of the water heater.

Delivery set and purpose

Water heater
Safety valve 1.1.3. Bracket
Installation and operation manual
Warranty certificate
Original packing
«T» piece union and drain tap (optional)

The appliance is designed for installation inside the buildings, in the


household and on utility premises. It is intended for water heating to a
temperature below boiling point, with the opt ranking) at several spots
(bathroom, kitchen, and toilet) and further maintenance of the set
temperature in the automatic mode. Water heating time depends on the
volume of the water he the power of the heating element.

Main elements

1. Inner tank
2. Thermal insulation of polyurethane foam providing minimal heat dispersion
3. Heating element
4. Temperature controller which allows you to set the desired temperature of
the water heating
5. The thermostat controls the temperature of water in the tank
6. Safety valve is installed at the inlet of the water heater and serves to
prevent the return of water to the water line and protect the tank from
excessive pressure
7. Magnesium anode rod provides additional protection of the inner tank
from corrosion

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 8/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

TECHNICAL CHARACTERISTICS

30 40 80
Product 50 S 65 S 12 15
SLI SLI SLI 50 65 80 100
range LIM LIM 0 0
M M M

En
am 12 14 17 19 21 15 17 19 23 28 32
We
el
igh
t (k
g) Ino
9 11 12 14 16 12 – 15 17 20 25
x

This appliance is conforming with the international standards:

Electrical safety standards IEC 60335-1 and IEC 60335-2-21.


EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-
3-2, EN 61000-3-3.

The products are compliant according to:

TP TC 004/2011 «Technical regulations of the Customs Union on safety of


low voltage equipment».
TP TC 020/2011 «Technical regulations of the Customs Union on electro-
magnetic compatibility».

INSTALLATION

Attention! The installation and set-up of the water heater must be carried out
by a qualified technician in conformity with the applicable rules and hygiene
and sanitary standards in force and with any provisions set forth in this
manual.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 9/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Hot-water boiler bonding against the wall

Water heater mounting is made on the main wall using brackets and
fastening hooks. Fastening hooks (not included in the supply) with a
diameter of at least 12 mm are recommended. Depending on the model,
you will need 2 or 4 of the fastening hooks.
Prepared fastening must support a weight that is three times higher than
the weight of the water heater filled with water.
The appliance should be installed as close as possible to the point of water
intake to limit heat (A in Fig. 1).

Allow for a clearance of at least 50 cm under the appliance and a clearance


of 10 cm from the ceiling for maintenance.
The fastening of hooks to the wall must prevent inadvertent movement of
the bracket of the water heater over them. After installation, be sure to
check the security of the fastening.
To prevent the property of the customer and (or) third party from damage
caused by failures of the hot water supply system, it is recommended to
mount the water heater on the premises provided with a waterproof floor

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 10/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

and sewer drain. Never put objects sensitive to water under the water
heater.
During mounting the water heater in unprotected areas, you must install it
underneath the protective tray with drainage into the sewer.

Standard connection

The safety valve (A in Fig. 2)

supplied must be installed on the cold water inlet of the water heater
(marked with the blue ring).
Connect the inlet of the safety valve to the cold water line with a tube or
flexible hose.
Connect a tube or flexible hose to the hot water outlet of the water heater
(marked with the red ring) for hot water removal to the draw-off point.
For easy maintenance, it is recommended to install a T-piece with shut-off
(B in Fig. 2) between the cold water inlet and the safety valve of the water
heater. It will help to drain water from the water heater without safety valve
removal.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 11/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

To facilitate the access of air into the tank when draining water, it is
recommended to install an additional T-piece with a shut-off valve at the
hot water output.
When water pressure exceeds 5 bar, place before the safety valve a reducer
to reduce the pressure.
The device cannot work with water where hardness is less than 12°F. If
water is with hardness above 25°F, it is necessary to use a softener to
reduce the formation of scale and the probability of failure of the heating
element. The water hardness should not fall below 15°F.

Electrical connection
Attention! Electrical wiring should be done by a qualified technician, ensuring
it complies with safety rules. The manufacturer is not to be held responsible
for any damage caused by the incorrect earthing of the system or for fault
defaults of the electricity supply.

If the product is already equipped with a cable and plug, simply connect it
to a power supply source.
If the water heater is supplied without a power supply cable, use a cable
featuring the same characteristics (type H05VV-F 3×1,5 mm2, Ø 8,5 mm)
for connection. Remove the cover. The power supply cable should be
threaded through the relevant hole on the cover of the appliance and fixed
to the thermostat terminals. Then every wire should be fixed in place by the
corresponding screw.
The water heater must be earthed. The grounding scheme should ensure
the absence of electric potential on the body of the water heater. The earth
cable (of yellow-green color) should be fixed to the terminal marked by the
symbol. Fix the power supply cable using the cable clamps.

Make sure that the power supply voltage conforms to the water heater
technical characteristics indicated on the data plate.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 12/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

A. Indicating light contacts


B. Earthing
C. Power supply

STARTING AND OPERATION

Commissioning

Shut off the hot water supply of the central water supply system. Before
connecting the appliance to a power source, fill the tank up with mains
water. To do this, turn on the hot water mixer tap and then tap of cold
water supplied to the water heater.
Once the water heater is full, the water will flow from the mixer tap. Check
the flange for leakages. Center it and tighten the nuts if necessary.
Turn the hot water tap on the mixer off.
Connect the appliance to a power source.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 13/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Temperature control

In models equipped with external control, the water temperature can be


controlled by a handle connected to the thermostat in accordance with
marks.
The temperature is set by using the regulation button clockwise to increase
the temperature of heating and counterclockwise to decrease it.
The indicator lamp is constantly lit during the heating phase and turns off
after reaching the set temperature.
If an appliance model does not have an external control, the temperature
can be set by turning the adjusting screw of the thermostat in the range
marked by «+» and «-» signs. To do so, disconnect the water heater from
the power supply and remove the plastic cover of the appliance.
It is recommended to install the controller in a position corresponding
approximately to 75% of the maximal value. In this case, the appliance is
operated in economy mode significantly reducing the rate of scale
formation.

MAINTENANCE AND REPAIR WORKS

Attention! Do not try to repair the appliance by yourself. All maintenance and
repair works should be carried out by a qualified technician in conformity with
the safety norms and with any provisions set forth in this manual.

Water Drain
If there is a possibility that the ambient temperature drops below 0°C in the
room where the appliance is installed, drain water from the water heater.

Disconnect the appliance from the electrical supply;


Make sure that the water in the appliance is of safe temperature;
Turn off the tap of cold water supply to the water heater;
Turn on the hot water tap on mixer for pressure relief inside the tank;

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 14/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Turn on the T-connector stop valve installed at hot water outlet (marked
with red ring) for air access into the tank. If it is absent, remove the
connections at the water heater outlet;
Connect drain hose directed into the sewer to the T-connector stop valve
installed at the cold water inlet of the water heater (marked with the blue
ring) and open it. If there is no T-connector, connect the hose to water
heater inlet;
After draining, make sure there is no water inside the water heater

Freezing of water inside the water heater leads to irreversible changes and
defects. It invalidates all warranty liability on the part of the manufacturer.

Replacing internal parts

Prior to work, disconnect the appliance from the power supply and drain the
water from the water heater. Remove the appliance cover. To replace the
thermostat pull it straight out ot the cluster and disconnect from power
supply. To replace heating element and magnesium anode (models with an
autoclave flange) remove the nut (D in Fig. 3), remove the flange holder (S in
Fig. 3) and open the flange (F in Fig. 3) by pressing it inside. Remove the
flange by turning it on its axis. To replace heating element and magnesium
anode (models with a flange on the 5 bolts) remove 5 nuts (C in Fig. 4) and
remove the flange (F in Fig. 4).

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 15/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Periodical maintenance

Magnesium anode

The magnesium anode rod is an integral part of the protection system of


water tank and heating element against corrosion against corrosion. It’s
necessary to check the condition of the magnesium anode rod ANNUALLY.
In case of severe wear, the magnesium anode rod must be replaced. The
warranty for water tank and heating element with the worn with the worn
magnesium anode rod (residual volume is less than 30%) is not valid. The

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 16/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

magnesium anode rod should be replaced at least once in 24 months


(except for the water heater with the internal tank made of stainless steel).
Safety valve

The safety valve (pressure safety device) must be inspected regularly to


check that it is not blocked or damaged. Replace the valve or remove
limescale deposits if necessary. If the safety valve is equipped with a lever,
regular valve correct operation check procedure can be performed with its
help. The drainage pipe of the safety valve may generate water droplets. It
is not a defect; it is due to relief work function of the valve pressure relief
that occurs when water is heated in enclosed space of the inner tank.
RCD (Residual Current Device)

If the appliance comes with a residual current device (RCD) located on the
power cord, and then after the tankof the water heater is filled with water
and the system is checked for leaks, put in the electrical plug of the water
heater and do the following:
Press «RESET» knob on the RCD body, LED will be lit indicating
electricity supply.
Then press «TEST» knob, power will be off, as well as LED.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 17/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Press «RESET» knob again. If the power LED lit up, it means that the
appliance is safe to use.
If you press the «RESET» knob, but LED does not light up, contact the
Technical Assistance Centre for advice by a qualified technician
Heating element

Tubular heating element is intended for water heating in the inner tank, by
converting electric energy into thermal energy. Scale formation on its
surface may lead to a deterioration in heat transfer, overheating and failure
of the heating element. Regularly inspect and, if necessary, remove the
limescale from its surface with a descaling solution.
The warranty on the heating element is not valid if one or several following
conditions:
The water hardness exceeds 25°F;
The thickness of the scale layer on the surface of the heating element
is more than 5 mm;
The residual volume of the magnesium anode is less than 30% of the
original

Note

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 18/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

The manufacturer disclaims any liability for any damage due to incorrect
plug-ins and failure to comply with the requirements set forth in this
manual.
Plumbing lines and stop valves must comply with the water supply
pipelines.
Water heater is a sophisticated technical household appliance.
Hot water with a temperature over 50°C may immediately cause severe
burns or even death. Children, medically fragile, and elderly people are
more exposed to the risk of burns.
Water may drip from the water heater, so do not leave valuable items and
equipment under the appliance.
If there Is a possibility that the temperature drops below 0°C in the room
where the appliance is installed, drain the water from the water heater.
Water heater installation and plug-in are performed at the customer’s own
cost.
Heat insulation marks on the outer casing of the item are a technological
feature of the production process and are not considered as a defect.
Any repair or maintenance procedures must be performed only after the
heater Is disconnected from the power source.
Any malfunctions must be repaired by professional repair service centers.
If a malfunction appeared, disconnect the water heater from the power
source, shut off cold water supply and contact service center about it.
Before making call to the service center, make sure that the problem is not
related to water or power outages.
For warranty servicing, please contact the nearest authorized service center

Do not

Modify the water heater construction.


Install the vertical models horizontally, and horizontal models vertically.
Use the water heater for purposes other than that intended.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 19/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Tilt, move and turn water heater during operation.


Cover or plug the drain hole of the safety valve.
Connect the water heater to power source when there is no water in it.
Remove the plastic cover when the appliance Is connected to power
source.
Switch the water heater on if the earthing is faulty or not arranged.
Use central heating, cold or hot water line as earthing lines.
use T-connectors or extenders and adapters to connect the appliance to
power source.
Switch the water heater on in case of heating element or thermostat
breakdown.
Use water heater without pressure regulator with the pressure of water line
over 5 bar.
Connect the water heater to pipes and fittings not rated for operation at a
temperature of 80°C at maximum pressure level.
Connect the water heater to water line without a safety valve or with a
safety valve with lower technical characteristics than the valve in the
delivery set.
Connect the safety valve tothe hot water outlet of the water heater.
Install the appliance in non-ventilated rooms with high humidity level.
Operate the water heater at ambient temperatures below zero.
Expose the appliance to direct sunlight.
Data and specifications are subject to modification. The manufacturer
preserves the right to make any necessary changes without prior notice or
replacement.

This product conforms to Directive WEEE 2012/19/EU.


The crossed-out recycled bin symbol indicates that in accordance with the
regulations of the applicable law this product should be disposed of
separately from normal household waste. The user is responsible for pro per
disposal of equipment thereby promoting environmental protection and
ensuring the reusing and recycling of materials used in product
manufacturing.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 20/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Data plate

1. Brand
2. Serial number or product code
3. Model
4. Tank material
Fe+Enamel – enamel steel
Inox or Stainless Steel – stainless steel
5. Maximum pressure
6. Volume
7. Rated power
8. Voltage
9. Current frequency
10. Country of origin
11. Protection rating

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 21/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Serial number

Recommendation on the storage water heater installation

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 22/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Water heater device

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 23/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

1. Outer housing
2. Bracket
3. Inner tank
4. Hot water outlet
5. Magnesium anode
6. Cold water inlet
7. Thermal insulation
8. Thermostat shell
9. Heating element
10. Flange
11. Thermostat
12. RCD (optional)

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 24/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

13. Power supply cable(optional)


14. Knob (optional)

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 25/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

Installation scheme

Dimensions

M
Ø OD A B C D E F L M X Y Z T
EL

30 58 14 96, 31 10 38 G1/
– – – – –
V 8 5 5 0 0 3 2”

40 71 14 96, 31 10 38 G1/
35 – – – – –
V 9 5 5 0 0 3 2”
3
50 83 14 96, 31 10 38 G1/
– – – – –
V 7 5 5 0 0 3 2”

65 98 14 96, 31 10 38 G1/
– – – – –
V 1 5 5 0 0 3 2”

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 26/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

80 11 14 96. 31 10 38 G1/
– – – – –
V 78 5 5 0 0 3 2”

30 58 64, 14 24 31 10 38 19 G1/
– – –
H 8 5 1 2 0 0 3 6,5 2”

40 71 64, 14 37 31 10 38 19 G1/
– – –
H 9 5 1 3 0 0 3 6,5 2”

50 83 64, 14 49 31 10 38 19 G1/
– – –
H 7 5 1 1 0 0 3 6.5 2”

65 98 64, 14 63 31 10 38 19 G1/
– – –
H 1 5 1 5 0 0 3 6,5 2”

80 11 64, 14 83 31 10 38 19 G1/
– – –
H 78 5 1 2 0 0 3 6,5 2”

50 55 16 16 31 10 48 G1/
– – – – –
V 3 3 5 0 0 0 2”

65 66 16 16 31 10 48 G1/
45 – – – – –
V 6 3 5 0 0 0 2”
0
80 75 16 16 31 10 48 G1/
– – – – –
V 8 3 5 0 0 0 2”

100 91 16 16 31 10 48 G1/
– – – – –
V 3 6 5 0 0 0 2”

120 11 16 16 31 10 48 G1/
– – – – –
V 08 6 5 0 0 0 2”

150 13 16 94 16 31 10 48 G1/
– – – –
V 38 4 4 5 0 0 0 2”

50 55 11 15 16 31 10 48 24 G1/
– – –
H 3 3 9 0 0 0 0 5 2”

80 75 11 17 33 31 10 48 24 G1/
– – –
H 8 3 4 5 0 0 0 5 2”

100 91 11 17 48 31 10 48 24 G1/
– – –
H 3 3 7 7 0 0 0 5 2”

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 27/28
23/10/24, 15.50 ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters Instruction Manual

120 11 11 17 68 31 10 48 24 G1/
– – –
H 08 3 7 2 0 0 0 5 2”

Ariston Thermo S.p.A.


Viale Aristide Merloni, 4560044 Fabriano (AN)
Tel. (+39) 0732.6011
ariston.com

Documents / Resources

ARISTON PRO1 R ABS 80 V Slim Electric Water Heaters


[pdf] Instruction Manual
PRO1 R, ABS 80 V Slim Electric Water Heaters, PRO1 R ABS 8
0 V Slim Electric Water Heaters, Slim Electric Water Heaters,
Electric Water Heaters, Water Heaters, Heaters

References

Ariston Group
Ariston Group
User Manual

Manuals+, Privacy Policy

This website is an independent publication and is neither affiliated with nor endorsed by any of the trademark owners. The "Bluetooth®"
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The "Wi-Fi®" word mark and logos are registered trade‐
marks owned by the Wi-Fi Alliance. Any use of these marks on this website does not imply any affiliation with or endorsement.

https://manuals.plus/ariston/pro1-r-abs-80-v-slim-electric-water-heaters-manual 28/28

You might also like