‫شركة إيثار الرافدين‬

ETHAR AL RAFIDAIN
COMPANY

QUOTATION & CALCULATION OF MOVENPICK INDOOR POOL

To : MOVENPICK HOTEL
Date 2024.04.02
Address : Baghdad, Iraq
Attention : Eng. Amr
Tel No. : 07801372240 Pages 3
Dear Sir,
With reference, we are pleased to offer our best for the supply of Swimming Pool material which are
manufactured by AQUA, ITALY.

Main Pool
Pool Area : 154.8 m 2
Ave (depth) : 1.7 Mtrs
Water Volume : 263.16 m 3
Turnover Period : 3 Hours
Filtration Rate : 87.72 m 3 /hr
Pool Type : Overflow Type

FILTRATION SYSTEM:
- By using Tow Vertical Bobbin Filter FB-1400 , then the filtration rate will exceed the needed 87.72 m3
- Using Two Swimming Pool Pump '' BARI-1000T'' with 8.7HP/6.5KW Achieves 57m3/hr @ 20MTR head,
connecting one pump with each Filter.

No. Code Description Qty

1 FB-1400 Vertical Bobbin Filter 2 pcs

2 AFM-01 Activated filter media (25kg bag) 144
AFM-02 Bags
AFM-03
3 BARI-1000T Self Priming Pump BARI 2 pcs
4 MM5-110 Manual Manifolds of 5 valves 110 mm 2 sets
(Butterfly valve)
1 F-166 Stainless Steel Bottom Grate Cover 2 pcs
80m3/hr
2 F-230 Stainless Steel Adjustable floor inlet 14 pcs
8m3/hr
3 F-240 Stainless Steel Suction 2 pcs
4 F-245 Stainless Steel overflow channel drain 12 pcs
10m3/hr
5 L-407 Overflow Stainless Steel Ladder 4 steps 1 pcs
1 E-108SS-252-RGB Large Stainless Steel LED Flat Light AC 12 pcs
2 RC-12 Remote Control & Controller 1 pcs
3 E-244 Stainless Steel Connection Box 12 pcs
4 200300010 Flexible Connection Conduit Cable 12 pcs
5 E-247 Cascade Transformer 2 pcs
 ‫شركة إيثار الرافدين‬
ETHAR AL RAFIDAIN
COMPANY

No. Model Description Qty

1 ADPT+050 Auto. Dosing System, A-POOL SYSTEM PH- 1 pcs

CL suitable for pool up to 500m3
2 ADTANK020 PH & CL PE TANK 200L 2 pcs
3 ADLASM30BO Suction Lance 2 pcs
4 ADAG3P07S Electrical Mixer 2 pcs
HEATING & COOLING UNIT
1 PH2-02713-R410A AIR TO WATER HEATING / COOLING 2 pcs
PUMP

Jacuzzi
Size Half Circle : R=1.85 X Depth 1m
Total Water Vol. : 4.2m3
Turnover Period : 0.33 Hr
Filtration Rate : 13 m3/Hr
Pool Type : Skimmer

No. Model Description Qty

1 MU-800N-VS Bobbin-Wound Sand Filter 1 pcs

'' MUNICH'' with valve
2 AFM-01 Activated filter media (25kg bag) 12
AFM-02 BAGS
AFM-03
3 EUROSWIM300 Self-priming pump for filtration 3hp 1 pcs
4 19120 Stainless Steel AISI 316L Skimmer 1 pcs
5 EUROSWIM100 Self-priming pump for Jacuzzi circulation 1hp 1 pcs
6 f-219 Stainless Steel Oriented Wall Inlet 6m3/hr 3 pcs
7 17002 Stainless Steel Hydro- massage Inlet 6 pcs
Oriented
8 ASC0140- Air Blower 1 pcs
1MA800-1
9 F-165 Stainless Steel Drain AIS 316L 2 pcs
10 E2-3-24 Heater Titanium 24 KW 1 pcs
1 ADPT+050 Auto. Dosing System, A-POOL SYSTEM PH- 1 pcs
CL suitable for pool up to 500 m3
2 ADTANK020 PH & CL PE TANK 200L 2 pcs
3 ADLASM30BO Suction Lance 2 pcs
4 ADAG3P07S Electrical Mixer 2 pcs
 ‫شركة إيثار الرافدين‬
ETHAR AL RAFIDAIN
COMPANY

BALANCE TANK CALCULATION:

As per SPATA " The tank is provided to hold a volume of water, in excess of the pool volume, to
compensate the displacement of water when bathers enter the pool '' The Formula we adopted, based
on 1/3rd Balance Tank Volume = POOL SURFACE AREA * X

Where:
X = 75-100 litres in case ( commercial pool with excessive activity.
X = 50-75 litres in case ( commercial pool with play/water features
X = 25-50 litres in case ( commercial pool with swimming only )
X = 15-25 litres in case ( Private pool)

154.8 m2 x 37.5 litres /1000 litres = 5.8 m3

Balance Tank Volume = 5.8 m3 x 3 = 17.4 m3

Your inquiry is greatly appreciated. Should you desire additional information or require further clarification, please
don't hesitate to reach out to us. Your satisfaction is our utmost priority, and we are committed to providing you
with a special and exceptional experience.

Thanking you
ETHAR AL RAFIDAIN Co.
Eng. Zaid Kadhim
Project Manager
01 01 POOL FILTRATION
POOL FILTRATION

VERTICAL
07 BOBBINED FILTERS

Technical features
A vertical, bobbin-wound sand filter available in lateral or nozzle
plate systems for air scouring capabilities

• Bobbin-wound fiberglass construction reinforced with polyester resin

• Vertical cylinder tank with multiple layer construction for

anti-corrosive and chemical protection

• UV resistant - Suitable for operation under prolonged sunlight

• Optional accessories include sight glass, manhole and air purge

valve

• Maximum filtration Velocity : 50m³/h/m²

• Maximum operating pressure: 2.5 or 4 bar (Test pressure: 4 or 6 bar)

• Warranty: 5 years on filter body

• Manifold and valves are not included

Dimensions

Models FBH-1200 TO FBH-2500 FB-1200 TO FB-2500

QUARTZ
DIMENSIONS mm
Ø SAND
MODEL
mm
kg A B C D E G

FB-1200 1200 1200 190 630 550 1180 1816 995

FB-1400 1400 1800 200 630 550 1180 1816 1220
FB-1600 1600 3000 220 720 490 1210 1916 1365
FB-1800 1800 3800 220 750 440 1190 1956 1630
FB-2000 2000 5100 230 770 490 1260 2060 1630
FB-2200 2200 7600 230 940 500 1440 2376 1800
FB-2500 2500 8500 230 1050 550 1500 2670 1800
FBH-1200 1200 2800 170 665 350 1015 2080 995
FBH-1400 1400 2700 190 675 350 1025 2175 1220
FBH-1600 1600 3600 200 775 350 1125 2310 1365
FBH-1800 1800 4100 220 780 415 1195 2320 1630
FBH-2000 2000 5400 220 865 415 1280 2460 1630
FBH-2300 2300 9200 230 1060 550 1610 2720 1800
FBH-2500 2500 10400 230 1120 550 1670 2750 1800

Add - Lux end of filter code to be supplied with air purge, Manhole, and sight glass

20 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
 01
POOL FILTRATION

FEATURES

Nozzles System Lateral System Air Purge Manhhole Sight Glass

Working pressure: 2.5kg/cm2 or 4 kg/cm2

Test pressure: 4 kg/cm2 or 6 kg/cm2

CONNECTIONS FILTER AREA FLOW WEIGHT VOLUME

CODE PACKING
(m3/h)
mm M2 kg m3
V=50m3/h/m2
FB-1200-2.5-LAT FB-1200-4-LAT 90 1.13 55 1 139 2.26
FB-1400-2.5-LAT FB-1400-4-LAT 110 1.54 77 1 225 3.25
FB-1600-2.5-LAT FB-1600-4-LAT 125 2.01 102 1 273.5 4.76
FB-1800-2.5-LAT FB-1800-4-LAT 140 2.54 125 1 412 6.67
FB-2000-2.5-LAT FB-2000-4-LAT 160 3.14 147 1 450 9.03
FB-2200-2.5-LAT FB-2200-4-LAT 200 3.8 190 1 554 15.02
FB-2500-2.5-LAT FB-2500-4-LAT 225 4.90 240 1 680 21.68
FB-1200-2.5-NOZ FB-1200-4-NOZ 90 1.13 55 1 139 2.26
FB-1400-2.5-NOZ FB-1400-4-NOZ 110 1.54 77 1 225 3.25
FB-1600-2.5-NOZ FB-1600-4-NOZ 125 2.01 102 1 273.5 4.76
FB-1800-2.5-NOZ FB-1800-4-NOZ 140 2.54 125 1 412 6.67
FB-2000-2.5-NOZ FB-2000-4-NOZ 160 3.14 147 1 450 9.03

FB-2200-2.5-NOZ FB-2200-4-NOZ 200 3.8 190 1 554 15.02

FB-2500-2.5-NOZ FB-2500-4-NOZ 225 4.90 240 1 680 21.68

FBH-1200-2.5-LAT FBH-1200-4-LAT 90 1.13 55 1 238 3.35
FBH-1400-2.5-LAT FBH-1400-4-LAT 110 1.54 77 1 258 4.58
FBH-1600-2.5-LAT FBH-1600-4-LAT 125 2.06 102 1 473 6.20
FBH-1800-2.5-LAT FBH-1800-4-LAT 140 2.52 125 1 473 7.94
FBH-2000-2.5-LAT FBH-2000-4-LAT 160 2.97 147 1 772 10.38
FBH-2300-2.5-LAT FBH-2300-4-LAT 200 4.43 190 1 658.5 1621
FBH-2500-2.5-LAT FBH-2500-4-LAT 225 4.89 240 1 760 17.88
FBH-1200-2.5-NOZ FBH-1200-4-NOZ 90 1.13 55 1 238 3.35
FBH-1400-2.5-NOZ FBH-1400-4-NOZ 110 1.54 77 1 258 4.58
FBH-1600-2.5-NOZ FBH-1600-4-NOZ 125 2.06 102 1 473 6.20
FBH-1800-2.5-NOZ FBH-1800-4-NOZ 140 2.52 125 1 473 7.94
FBH-2000-2.5-NOZ FBH-2000-4-NOZ 160 2.97 147 1 772 10.38
FBH-2300-2.5-NOZ FBH-2300-4-NOZ 200 4.43 190 1 658.5 1621
FBH-2500-2.5-NOZ FBH-2500-4-NOZ 225 4.89 240 1 760 17.88

AQUA-ME.AE 21
01 01 POOL FILTRATION
POOL FILTRATION

ACTIVATED
24 FILTER MEDIA

Technical features
BIOLOGICAL INSTEAD OF CHEMICAL APPROACH

Traditional water treatment tries to avoid disease transmission by using

more and more chlorine, UVC irradiation or ozone. But the transmission
of pathogens is a biological problem and therefore needs a biological
solution. The approach of the Dryden Aqua integrated water treatment
2 1 3
system does exactly that: Instead of using more powerful disinfections and
expensive equipment, we designed a pool water treatment process that
changes the water to make it difficult for viri, bacterium and parasites to
live and reproduce

PREVENT INSTEAD OF KILLING!

1.No substrate: As a consequence of our bio-resistant AFM”, bacterium

have no substrate on which they can grow and multiply.

2.No nutrients: We remove food for bacteria by advanced coagulation,

variable speed pump flocculation and filtration. Bacterium cannot grow 1 Filtration with AFM®
anymore.
2 Coagulation and flocculation with APF and ZPM
3.The lower the chlorine demand, the lower the disinfection by-products
3 Catalytic oxidation with ACO
(DBP’S): DAISY filters almost everything out of the water and reduces
the chlorine demand to the lowest level possible. The lower the chlorine
oxidation demand, the lower the concentration of chlorine disinfection
by-products in the water and in the air. AFM® stands for Activated Filter
Media, a revolutionary filter media made from green container glass,
developed by marine biologist Dr. Howard Dryden. AFM® exceeds
To produce one ton of AFM’, 1.8 tons of green glass is needed. AFM is
the performance of quartz and glass sand by filtering 30 % - 50 % more
produced according to ISO 9001-2008 standards. We now also have
organics and sub 5 micron particles out of the water. The catalytic
the world’s most important certification for drinking water: NSF 61.
properties on the surface of AFM® make it self—sterilizing and bio-resistant,
which means no biofilm is formed in the filter bed. This reduces the chlorine
demand and therefore the formation of harmful volatile disinfection by
Advantages:
products such as THM’s, cyanogen chloride and trichloramine. Not only
the chlorine smell but also the risk of getting infected by pathogens like
Legionella or cryptosporidium, is greatly reduced. The pool is healthier for • Crystal clear water - AFM® filters at least 30 - 50% more than quartz
or glass sand.
people, especially children, safer for the environment and economical
with crystal clear water. AFM® has been successfully used in over 500,000 • Lower consumption of chlorine - The better the filtration, the lower
public and private swimming pools worldwide. the chlorine demand.

• No trichloramine - no chlorine smell AFM® prevents growth of

biofilm.
AFM® — ACTIVATED FILTER MEDIA 10
• No biofilm, no Legionella - Biofilm is a home for pathogens such as
Legionella.
AFM® is a unique bio resistant filter media. The raw material used for
AFM” is green container glass. The glass is washed, disinfected, thermally • Perfection for chlorine-free systems - AFM® greatly reduces the
treated and then reduced to a very specific grain size and shape. For oxidation demand.
security reasons, the production process (cyclonic size reduction) assures
that no dangerous glass splinters are present in the filter media. After size
reduction, the grains are activated in a patented three step process. This
creates a mesoporous structure with a huge catalytic surface area of
50’000 m2 per m3. The surface area is 300 times larger than the surface
area of sand or other glass filter media. The surface area is important for all
adsorptive and catalytic reactions. In contact with the water free radicals
(OH-radicals) are formed, which protect the surface from bio-fouling. The
larger the surface area the higher performance and bio— resistance you
will get from the media.

42 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
 01
POOL FILTRATION

AFM® - ACTIVATED FILTER MEDIA

The graph opposite shows the latest test results (July 2014) from IFTS (Institut Filter filling:
de la Filtration et des Téchniques Séparatives, www.ifts—sls. com). Dryden Aqua recommends the following layers:

Different glass filter media and sands were tested. The experiment was WITHOUT AFM® 0 WITH AFM® 0
done without flocculation and at a filtration rate of 20m3/h to get a
70% AFM® 1 20% AFM® 0
representative comparison. AFM® 1 will remove more than 95% of all
particles in the water down to 4 microns. The best a new, very high quality 15% AFM® 2 as supporting layer 50% AFM® 1
sand or other glass filter media can achieve is 20 microns at an efficiency
15% AFM® 3 as supporting layer 30% AFM® 2 and
of 95%. In addition, the filtration performance with AFM® will stay at this
AFM® 3 as supporting layer
high level for many years.

• AFM® 0 has been developed for best filtration where flocculation

cannot be used.

• AFM® 0 is able to remove particles of 1 micron at an efficiency of

more than 95%.

• AFM® 0 cannot be combined with flocculation. The backwash

speed should be about

• 30 m3/h.

Important:
For smaller filters (<1000 mm diameter) and for all filters with nozzle plate,
irrespective of filter diameter, use 70% of AFM®1 and 30% of AFM®2.
AFM®3 is for larger diameter filters to ensure adequate filtration.

Models
WEIGHT VOLUME
CODE DESCRIPTION PACKING
kg m3

AFM-00 AFM® GRADE 0 0.25 - 0.5 mm 1 25 0.015

AFM-01 AFM GRADE 1 0.5 - 1.0 mm
®
1 25 0.015
AFM-02 AFM® GRADE 2 1.0 - 2.0 mm 1 25 0.015
AFM-03 AFM® GRADE 3 2.0 - 4.0 mm 1 25 0.015

AQUA-ME.AE 43
 PUMPS & COUNTER CURRENT

02

SWIMMING POOL PUMP

05 “BARI”

Technical features
• Standard one-piece plastic mounting base plate.

• Equipped with high-efficiency motor, high efficiency and

energy saving, long service life.

• It can operate safely for a long time under the medium

condition of 75°C, and is suitable for natural hot spring water
circulation.

• It is suitable for water circulation filtration systems such as

large water worlds, aquariums, and large swimming pools.

• Body material fiberglass reinforsed polypropylene

• Impeller material NORYL

• Strainer material (fliter)in polypropylene

• Shaft material SS316L

• Mechanical seal material graphite/Silicone/viton/SS316

•
Dimensions
Protection rating IP55

• Insulation rating :F

• Liquid temperature range : 5-75°C

• Maximum ambient temperature: 50°C 4”

• Maximum Working pressure 7 bar

4”

Models
INTENSITY A DIMENSIONS WEIGHT VOLUME
CONNECTION QMAX HMAX
CODE PACKING
DNA / DNM (M³/H) (M)
II 230 III 230 III 400 L kg m3

BARI-300M 4” 10 64.8 14 800 1 45.5 0.20

BARI-300T 4” 6.8 3.9 64.8 14 800 1 45.5 0.20
BARI-400M 4” 14 78 15 800 1 47 0.20
BARI-400T 4” 9.1 5.0 78 15 800 1 47 0.20
BARI-500T 4” 7.8 94.8 17 857 1 54.5 0.22
BARI-750T 4” 9.2 107 22 857 1 60.3 0.22
BARI-1000T 4” 10.5 126 21.5 887 1 64.5 0.22

2 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
PUMPS & COUNTER CURRENT

02
H (m)

10
00
75
0
40

50
30

0
0

HYDRAULIC FEATURES:

HEIGHT
SINGLE PHASE THREE PHASE
4 6 8 10 12 14 16 18 20 22 24
MODELS MODELS
(m)

BARI-300M BARI-300T 60 52 48 40 30 15
BARI-400M BARI-400T 78 70 60 52 47 30
FLOW
BARI-500T 94 85 82 78 70 60 40
(m3/h)
BARI-750T 102 96 90 82.5 78 70 60 47 30 -
BARI-1000T 126 120 113 110 98 85 70 57 30 -

ELECTRIC FEATURES:

INPUT POWER P1 kW MOTOR POWER P2 NOISE LEVEL

SINGLE PHASE
THREE PHASE MODELS
MODELS
SINGLE PHASE THREE PHASE kW HP MAX db A

BARI-300M BARI-300T 2.2 2.2 1.64 2.2 73

BARI-400M BARI-400T 3.0 3.0 2.6 3.5 75

BARI-500T 4.0 3.4 4.5 76

BARI-750T 5.5 5 6.7 79

BARI-1000T 7.5 6.5 8.7 79

AQUA-ME.AE 3
 01
POOL FILTRATION

VALVE
21 MANIFOLDS

Technical features
All ‘hidroten’ valve manifolds guarantee maximum quality and
reliability
• All valve manifolds including manual, electric or pneumatic for DN 75 to DN160, and includes flanges
to connect to filters DN 6 for 200 to 300

• The ‘Implex’ range of valves are ideal for all kinds of applications due to its multi-standard PVC design.
It can be operated via a clutch or trigger

• Standard (Inside the pipes): UNE-EN-1452 (PVC-U) and UNE-EN 12201 (PE)

• Standard (Flanges): DN 80 63, ANSI 16.5, BS 10 tabala D/E, UNE-EN1452 (PVC-U)

• Sets consist of 5 valves, 6 flange sets, 2 elbows and 5 tees

Please note: All manifolds are suppled disassembled and without support brackets

Models
CONNECTION MANIFOLD NO. OF WEIGHT VOLUME
CODE PACKAGING
mm TYPE VALVES kg m3
MM5-075 75 11.1 0.02
MM5-090 90 16.48 0.03
MM5-110 110 18.56 0.03
MM5-125 125 20.96 0.04
MM5-140 140 23.60 0.05
Manual 5 1 MANUAL VALVE
MM5-160 160 30.24 0.05
MM5-200 200 44.96 0.07
MM5-225 225 44.96 0.07
MM5-250 250 79.84 0.20
MM5-300 300 176 0.17
AM5-075 75 15.52 0.08
AM5—090 90 19.2 0.08
AM5-110 110 19.2 0.10
AM5—125 125 24 0.16
AM5-140 140 41.6 0.20
Electric 5 1
AM5—160 160 41.6 0.24
AM5-200 200 41.6 0.34
AM5-225 225 41.6 0.34 ELECTRIC DRIVEN
AM5—250 250 41.6 0.43 VALVE
AM5-300 300 41.6 0.54
PM5-075 75 34 0.08
PM5-090 90 41 0.08
PM5-110 110 67 0.14
PM5-125 125 70 0.16
PM5-140 140 101 0.23
Pneumatic 5 1
PM5-160 160 110 0.27
PM5-200 200 140 0.46
PM5-225 225 140 0.46
PM5-250 250 275 0.54
PNEUMATIC DRIVEN
PM5-300 300 252 0.82
VALVE

AQUA-ME.AE 39
01 01 POOL FILTRATION
POOL FILTRATION

LOAD LOSS CURVES

VALVES 75MM VALVES 90MM

VALVES 110MM VALVES 125MM

VALVES 140MM VALVES 160MM

VALVES 200/225MM VALVES250/300 MM

40 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
STAINLESS STEEL BOTTOM
GRATE COVER
• Made of AISI-316L stainless steel
• Suitable for concrete and liner installations
• Anti-vortex grill

CODE FLOW RATE AT SPEED DIMENSIONS mm WEIGHT VOLUME

PACKING
3
CONCRETE LINER 0.5 m/s m /h A B kg m3

F-165 F-165-L 45 355 x 355 295 x 295 1 4 0.003

F-166 F-166-L 80 455 x 455 395 x 395 1 5 0.006
F-167 F-167-L 140 555 x 555 495 x 495 1 6 0.009
STAINLESS STEEL
ADJUSTABLE FLOOR INLETS
• Made of AISI-316 L stainless steel

• Suitable for concrete and liner installations

DIMENSIONS FLOW RATE AT SPEED WEIGHT VOLUME

POOL CODE PACKING
A B C 4 m/s m 3 /h kg m3
Concrete F-230 145 55 8 1 1 0.018
Liner F-231 145 60 8 1 1 0.018
STAINLESS STEEL SUCTIONS
• Made of AISI-316 L stainless steel

• Suitable for concrete and liner installations

DIMENSIONS WEIGHT VOLUME

POOL CODE PACKING
A B C kg m3
Concrete F-240 100 2” 47 1 1 0.018
Liner F-241 100 2” 50 1 1 0.018
STAINLESS STEEL
OVERFLOW CHANNEL DRAIN
• Made of AISI-316L stainless steel

• Complete with hook for fixing

DIMENSIONS mm FLOW RATE AT SPEED WEIGHT VOLUME

CODE PACKING
A B C 4 m/s m3/h kg m3
F-245 110 112 63/70 10 1 1 0.006
F-246 130 112 90/70 20 1 1 0.006
OVERFLOW LADDER
• Stainless steel AISI-316 or AISI-304 handrail (Ø 42mm)
with a polished finish

• Stainless steel steps with anti-slip pads

• Corrosion resistant

• Includes anchor and flange type fixings for easy

installation to floors and walls

Ancillary Shoring for Anchor Type Stainless Steel Step

NSL815ry pad) (anti-slip pad’s)

DIMENSIONS WEIGHT VOLUME

CODE TREADS PACKING
A B C kg m3
L-405 L-405-316 2 493 1460 561 1 15 0.218

L-406 L-406-316 3 493 1710 811 1 16 0.225

L-407 L-407-316 4 493 1960 1061 1 17.2 0.250

L-408 L-408-316 5 493 2210 1311 1 20 0.282
 LARGE STAINLESS STEEL
23 LED FLAT LIGHT AC
• High quality, super bright underwater LED lamps 04
• Suitable for concrete or liner swimming pools
• Made of stainless steel AISI-316
• Easy to install (Installation kit not included) RC-12
REMOTE CONTROL
• 100% waterproof – lamp filled with epoxy resin & CONTROLLER
• Acid-proof, alkali-proof and UV resistant
• Low power consumption with long-term stability
• Includes 4m cable length (H07RN-F 2x1.0 2mm)
• Can be installed in PAR56 light housing
with additional fixtures
RC-03B RC-01
• Protection rating: IP68 REMOTE CONTROL REMOTE CONTROL Ø 25
& CONTROLLER & CONTROLLER
Ø WEIGHT VOLUME
CODE LUMEN COLOR LED WATT 12 VAC PACKING
mm kg m3
E-108SS-252-RGB 1350 RGB 252 18 260 1 2 0.068

E-108SS-252-W 2100 White 252 21 260 1 2 0.068

E-108SS-252-WW 2100 Warm white 252 21 260 1 2 0.068
E-108SS-531-RGB 1650 RGB 531 33 260 1 2 0.068
E-108SS-531-W 3600 White 531 36 260 1 2 0.068
E-108SS-531-WW 3600 Warm white 531 36 260 1 2 0.068
E-108SS-423-RGB 2750 RGB 423 55 260 1 2 0.068
E-108SS-423-W 6000 White 423 60 260 1 2 0.068
E-108SS-423-WW 6000 Warm white 423 60 260 1 2 0.068
E-108SS-630-RGB 1800 RGB 630 36 260 1 2 0.068
E-108SS-630-W 3900 White 630 39 260 1 2 0.068
E-108SS-630-WW 3900 Warm white 630 39 260 1 2 0.068

Wifi controller and remote control (Input/output 220V-240V 600w) - for aqua AC led
RC-12 1 0.2 0.0009
lights (Not compatible with 423 & 630 led resin)

Controller and remote control (Input 12v AC/output 12V 30A 360watt) - compatible
RC-01 1 0.2 0.0009
with AC led lights 423 & 630 led resin

Controller and remote controller (Input/output 220V-240V AC) - compatible with ac

RC-03B 1 0.2 0.0009
power led lights 423 & 630 led resin
 26 CONNECTION BOX
STAINLESS STEEL CONNECTION BOX
04
• For connections between lights
• Made of AISI-316 L stainless steel
• Fully waterproof with O-ring for cover and gland seals for outlets
• Protection rating: IP68

WEIGHT VOLUME
CODE PACKING
kg m3
E-244 1 1.10 0.002
 FLEXIBLE CONNECTION
27 CONDUIT CABLE
04 • Length: 2m
• Ø 20mm conduit cable with threaded end sockets ¾’’ M25

WEIGHT VOLUME
CODE DESCRIPTION PACKING
kg m3
200300010 Connection conduit cable 2m 20mm with 2 threaded end socket 3/4” M25 1 0.25 0.005
ELECTRICAL EQUIPMENT

30 CASCADE TRANSFORMER

• IP64 transformer with cabling for fast wiring 04

• Recommended for humid areas and where water is close
• High quality, long life, guaranteed for heavy duty conditions
• Input: 230V-240V
• Output: 12, 14 and 16V 50/60 Hz
• Manufactured under European Standards and CE Certified

UNLOAD VOLTAGE LOADING VOLTAGE RATED CURRENT

CODE
(V ± 5%) AC (V ± 5%) AC (A)

S1:3~4 0~13.1V 0~12V 12.5A

E-245

S1:3~5 0~15.2V 0~14V 10.71A

S1:3~6 0~17.65V 0~16V 9.4A
S1:3~4 0~12.68V 0~12V 25A
E-246

S1:3~5 0~14.87V 0~14V 21.43A

S1:3~6 0~17.05V 0~16V 18.75A
S1:3~4 0~12.32V 0~12V 33.33A
E-247

S1:3~5 0~14.67V 0~14V 28.57A

S1:3~6 0~17.01V 0~16V 25A
S1:3~4 0~12.6V 0~12V 50A
E-248

S1:3~5 0~14.7V 0~14V 42.8A

S1:3~6 0~16.8V 0~16V 37.5A

POWER W CURRENT WEIGHT VOLUME

CODE PACKING
50 Hz mA kg m3
E-245 120 50 1 4 0.003
E-246 240 60 1 5 0.003
E-247 320 80 1 6 0.003
E-248 480 85 1 7 0.003

AQUA-ME.AE 127
 CHEMICAL DOSING EQUIPMENTS

A-POOL TOP +
Technical features
• Control panel ON-OFF / proportional regulation of pH and Chlorine from
0-2 and 0-5 ppm for public and private pools composed by:
• N.1 1 AE START+ “PH-RX or PH-CL(J)” with 2 measure
• N.2 HC151+ PIMA (M70) adjustable on 3 models
• Modular probe holder for pH probes + RX electrode (only for RX series)
• Chlorine cell (Pt-Cu) complete with PH Electrode (only for CL series)
• Amperometric membrane probe for free chlorine with PH Electrode
output signal in mV (only for CLJ series)
• Complete with flow sensor and flow regulator
• Temperature probe
• pH Buffer solutions CODE STANDARD VERSION
• 2 level probes
• Power supply: 110-240V 50/60Hz Pump body PVDF

Pump Housing PP

08 Standards:
• No. 2004/108/CE EMC directive
Diaphragm PTFE

• No. 2006/95/CE ‘DBT low voltage directive’ Balls CE

• No. 2011/65/UE, 2002/96/CE ‘RoHS and WEEE directives’ Body valve PVDF

O-rings Viton®
Package dimensions:
Spring loaded injection
• L 660mm x H 800mm x W 250mm
valve
PVDF - Hastelloy - PTFE

A-POOL SYSTEM Foot valve

Power supply
PVDF

110-240 v

Models
SUITABLE FOR POOLS UP TO WEIGHT VOLUME
CODE TYPE PROBE SIGNAL PUMP TYPE WATT TUBE PACKING
Indoor Outdoor kg m3
ADPT+055 PH-RX PH-RX - M60 40 4x6 200 m 3
150 m3
1 10 0.1

ADPT+050 PH-RX PH-RX - M70 40 4x6 500 m3 400 m3 1 10 0.1

ADPT+060 PH-RX PH-RX - M80 50 4x6 1000 m3 800 m3 1 10 0.1

ADPTC070 PH-RX PH-RX - Dosing panel & accessories without pumps for large pools 1 10 0.1

ADPT+105 PH-CL PH-CU mV M60 40 4x6 200 m 3

150 m3
1 10 0.1

ADPT+100 PH-CL PH-CU mV M70 40 4x6 500 m3 400 m3 1 10 0.1

ADPT+110 PH-CL PH-CU mV M80 50 4x6 1000 m3 800 m3 1 10 0.1

ADPT+120 PH-CL PH-CU mV Dosing panel & accessories without pumps for large pools 1 10 0.1

ADPT+205 PH-CL(J) PH-CLJ mV(*) M60 40 4x6 200 m 3

150 m3
1 10 0.1

ADPT+200 PH-CL(J) PH-CLJ mV(*) M70 40 4x6 500 m3 400 m3 1 10 0.1

ADPT+210 PH-CL(J) PH-CLJ mV(*) M80 50 4x6 1000 m3 800 m3 1 10 0.1

ADPTC220 PH-CL(J) PH-CLJ mV(*) Dosing panel & accessories without pumps for large pools 1 10 0.1

INSTALLATION KIT

CODE DESCRIPTION
x2 x2 x4 x4 x2 x2

KITPDE503 Installation kit A-POOL TOP + PH-CL

x2 x2 x4 x4 x2 x2

KITPDE504 Installation kit A-POOL TOP + PH-CLJ

x2 x2 x4 x4 x2 x2

KITPDE515 Installation kit A-POOL TOP + mod.

222 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
 CODE MODEL SIZE (Ø X H ) VOLUME (L/H)

ADTANK010 PE tank 500 x 680 100 L

ADTANK020 PE tank 620 X 800 200 L

ADTANK030 PE tank 710 X 890 300 L

 CODE MODEL SEALING HEIGHTS CONNECTOR CONNECTIONS TANKS

ADLASM10BO Sunction lance GL-VT 115-600 BNC 4X6 60-100 L

ADLASM30BO Sunction lance GL-VT 115-840 BNC 4X6 200-300 L

AG-S
Technical features
08
• Slow water mixers.
• Slow single-phase AG1-PVC /AG1-AISI 70 rpm – Motor 230V 50Hz 0.12HP
• Slow speed three-phase - AG3-PVC/AG3-AISI -70 rpm – Motor 230/380v - 50 Htz - 0.12HP.

Dimensions

Models
CODE TANK WEIGHT VOLUME
SIZE MATERIAL PACKING
SINGLE-PHASE THREE-PHASE
L kg m3
SPEED 70 RPM SPEED 1400 RPM
ADAG1P06F ADAG3P06S A - TANK 1 100 PVC 1 6 0.03

ADAG1P07F ADAG3P07S A - TANK 2-3 200 - 300 PVC 1 7 0.05

ADAG1P08F ADAG3P08S A - TANK 5 500 PVC 1 7 0.05

ADAG1P09F ADAG3P09S A - TANK 10 1000 PVC 1 7 0.05

ADAG1A06F ADAG3A06S A - TANK 1 100 AISI 1 6 0.03

ADAG1A07F ADAG3A07S A - TANK 2-3 200 - 300 AISI 1 7 0.05

ADAG1A08F ADAG3A08S A - TANK 5 500 AISI 1 7 0.05

ADAG1A09F ADAG3A09S A - TANK 10 1000 AISI 1 7 0.05
 TEMPERATURE CONTROL

AIR TO WATER HEATING /

02 COOLING PUMP
Technical features
Heat pumps can be used for heating or cooling swimming pools, spas
or other open water systems. The water system pressure should be
less than 3 bar. (Cannot be used for closed water systems such as air
conditioning, ground source heating and so on.)

PRODUCT FEATURES
HIGH EFFICIENCY
Our heat pumps are highly efficient, taking the energy from
the ambient air and transferring that heat to the pool. The
heat pump can reach a COP of 5.5.

SAFETY VARIOUS PROTECTIVE MEASURES

Water and electricity are completely separate. ECO • Lack-phase and anti-phase protection
friendly gas, no fire, no electricity leakage, safer than fuel • Self memory function when power off
burner or electrical heater. • Overpressure protection
• Leakage refrigerant protection
• Water protection for unit
ENVIRONMENTALLY FRIENDLY
• Overcurrent protection
Choose R407C, R410-A, R22 as refrigerant, according to
• Temperature over protection
the requirements of EU Montreal Protocol.

ADVANCED CONTROL SYSTEM

14 CORROSION PREVENTION • Displaying operating and trouble status
The condenser uses titanium metal which is 4 to 5 times • Checking real-time operation parameters etc
more corrosion resistant than ordinary copper tubes and
• The cable length between controller and the unit can
is significantly more effective for the prevention of fluoride
be up to 30m for flexible installation (on request)
leakages. Liquids containing seawater or mild industrial water
can pass through these systems without any problems.
• Keep balance running of compressor
• Automatically adjusting capacity according to the
change of water inlet the temperature
• Can achieve the perfect docking with BMS. Set
remote control based on user requirement for easy
INTELLIGENT DEFROSTING management and maintenance. And can set multi
By means of both mechanical and automatic control, unit modular operation
defrosting can be operated over a shorter time to avoid
severe attenuation of heating capacity in winter and when
COMPRESSOR
AQUA uses world famous brand compressor such as
not in use.
COPELAND and GMCC so as to ensure the high quality of the
machine.
ANTIFREEZING CONTROL
The unit starts up automatic antifreezing control when
shutdown (no power off), using of antifreezing heat
exchanger, 10 freezing tests, no leakage..

378 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
TEMPERATURE CONTROL

HOW DOES THE CAPILLARY TUBE

UNIT WORK?
AS A CHILLER
1- STAGE ONE
The temperature of the hot gaseous refrigerant discharged from the
compressor is much higher than the outside ambient air temperature.
When the outside air passes across the condenser coil, the gaseous
refrigerant transfers its heat to the air and condenses into liquid.

2- STAGE TWO
The liquid refrigerant passes through the capillary tube, reducing its
pressure and temperature.

3- STAGE THREE
The low temperature refrigerant passes to the heat exchanger
evaporator, where the actual heat transfer takes place: the refrigerant
absorbs heat from the water pumped into the heat exchanger and
evaporates, whereby the water temperature is reduced.

4- STAGE FOUR
The gas refrigerant is then sucked to the compressor and compressed,
increasing its pressure and temperature, ready to start the whole cycle
once again.

AS A HEAT PUMP

1- STAGE ONE
The gaseous refrigerant passes to the compressor and is compressed.
When compressed, the pressure is increased and the temperature of the
vapor rises, effectively concentrating the heat.

2- STAGE TWO
The hot gaseous refrigerant passes to the heat exchanger condenser,
where the actual heat transfer takes place: the intensely hot gaseous
refrigerant transfers its heat to the water pumped into the heat
exchanger and condenses back into a liquid.

3- STAGE THREE
The liquid refrigerant then passes through an capillary tube, reducing its
pressure and temperature. The heat transfer medium (the refrigerant) is
colder than the outside air. 14
4- STAGE FOUR
As the outside air passes across the evaporator coil, the liquid refrigerant
absorbs heat from the air and evaporates.
ready to start the whole cycle once again.

AQUA-ME.AE 379
 TEMPERATURE CONTROL

TOP DISCHARGE
Models
PH2-02712 PH2-02713 PH2-02714 PH2-02715
-R410A -R410A -R410A -R410A
Refrigerant R410A R410A R410A R410A

Power supply V/PH/Hz 380~415/3/50 380~415/3/50 380~415/3/50 380~415/3/50

kW 45 55 65 82
Heating capacity
BTU/h 153540 187660 221780 279784
YL-H01-Heating:
A24/W26°C Power input kW 8.2 10.0 11.8 14.9

COP W/W 5.5 5.5 5.5 5.5

kW 38.3 46.8 55.3 69.7

Heating capacity
BTU/h 130509 159511 188513 237816
YL-H02-Heating:
A15/W26°C Power input kW 8.3 10.2 12.1 15.2

COP W/W 4.6 4.6 4.6 4.6

kW 32 40 47 59
Cooling capacity
BTU/h 110549 135115 159682 201444
YL-C01-Cooling:
A35/W30°C Power input kW 8.4 10.4 12.3 19.8

EER W/W 3.85 3.80 3.80 2.98

kW 27.5 33.7 39.8 50.2

Cooling capacity
BTU/h 93966 114848 135729 171228
YL-C02-Cooling:
A46/W30 Power input kW 8.9 11.1 13.1 16.5

EER W/W 3.08 3.04 3.04 2.98

MAX.POWER INPUT kW 13.4 17 20 25

MAX.CURRENT A 24 30 35 44

Heating water temp range. o

C 15~40 15~40 15~40 15~40

OPERATING Cooling water temp range. o

C 12~30 12~30 12~30 12~30

Ambient temp range o

C -15~53 -15~53 -15~53 -15~53

Compressor type Scroll Scroll Scroll Scroll

KEY Controller Micro processor based digital controller with LCD touch screen disply

Noise dB(A) 59 60 64 64

14 Type Titanium /PVC Titanium /PVC Titanium /PVC Titanium /PVC

Water flow (min.) m /h

3 11.1 13.5 16 20.1

Water flow (max) m3/h 25.8 31.5 37.3 47.0

HEATING
EXCHANGER Water pressure drop (max) KPa 11 14 20 20

Water connecton mm 63 63 63 63

Water pipe PPR or PVC PPR or PVC PPR or PVC PPR or PVC

Fan Position Verticle Verticle Verticle Verticle

FAN Material Plastic Plastic Plastic Plastic

Air flow m3/h 10000 13000 15000 18000

Net mm 1453 x 708 x 1084 1453 x 708 x 1284 1890 x 1000 x 1335 1890 x 1000 x 1355
DIMENSIONS
(L x W x H) Shipping mm 1520 x 780 x 1235 1520 x 780 x 1435 1940 x 1050 x 1485 1940 x 1050 x 1485

WEIGHT kg 265 /285 285 / 310 413/450 416/456

382 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
 01
POOL FILTRATION

BOBIN-WOUND
04 SAND FILTER “MUNICH’N

Technical features
Bobbin-wound, reinforced fibreglass sand filter with 6-way multiport top or
side mounted valves and a UV-resistant surface to resist extreme weather
conditions. For residential and commercial pools.
• 6-way multiport, top or side mounted selector for easy operation and
maintenance (Filtration, backwash, rinsing, waste, circulation and
lock).
• Complete with pressure gauge, manual air release and water purge
valves
• Fitted with UPVC collector arms and diffuser
• Top mount ‘MU’ series includes closure and screw
• Side mount ‘MU’ series (450, 550, 600 and 700) includes glass top
cover, seal clamps and butterfly valve
• Side mount ‘MU’ series (800 and 900) includes top cover made from
ABS and Polycarbonate with side screw closure valve
• Side mount ‘MU’ series (1000 and 1200) includes top cover and center
clamp closure valve
• Maximum operating pressure: 2.5 bar (Test pressure: 4 bar) Dimensions
• Warranty: 5 years on filter body

DIMENSIONS mm
CODE
A B C D E F G
MU-450N-VT 814 698 638 210 450 390 -
MU-550N-VT 845 730 670 235 550 500 -
MU-650N-VT 950 835 775 300 650 500 -
MU-700N-VT 1020 905 845 330 700 500 -
MU-450N-VS 360 420 730 210 450 390 125
MU-550N-VS 390 450 770 235 550 500 125
MU-650N-VS 430 390 850 235 650 500 125 MU-450N-VT / 550 / 650 / 700 MU-450N-VS / 550 / 650 / 700
MU-700N-VS 450 510 960 330 700 500 125
MU-800N-VS 560 646 1050 425 800 780 220
MU-900N-VS 610 696 1180 480 900 780 220
MU-1000N-VS 700 770 1220 580 1000 780 220
MU-1200N-VS 820 1005 1410 740 1200 1000 220

Models MU-800N-VS/900 MU-1000N-VS/1200

QUARTZ FILTER
FLOW WEIGHT VOLUME
Ø SAND AREA
CODE TYPE CONNECTIONS PACKING
mm (m3/h)
kg m2 kg m3
V=50m3/h/m2
MU-450N-VT Top 450 1.5” 8 75 0.16 2 16.5 0.19
MU-550N-VT Top 550 1.5” 10 125 0.22 2 21.1 0.23
MU-650N-VT Top 650 1.5” 16 150 0.30 2 24.3 0.38
MU-700N-VT Top 700 1.5” 19 225 0.40 2 26.5 0.34
MU-450N-VS Side 450 1.5” 8 75 0.16 2 16.5 0.19
MU-550N-VS Side 550 1.5” 10 125 0.22 2 21.1 0.23
MU-650N-VS Side 650 1.5” 16 150 0.30 2 24.3 0.38
MU-700N-VS Side 700 1.5” 19 225 0.50 2 33 0.45
MU-800N-VS Side 800 2” 25 300 0.50 2 41.5 0.67
MU-900N-VS Side 900 2” 30 400 0.64 2 52.3 0.95
MU-1000N-VS Side 1000 2.5” 40 650 0.98 2 115 1.84
MU-1200N-VS Side 1200 3” 56 1000 1.13 2 124 2.32

AQUA-ME.AE 17
01 01 POOL FILTRATION
POOL FILTRATION

ACTIVATED
24 FILTER MEDIA

Technical features
BIOLOGICAL INSTEAD OF CHEMICAL APPROACH

Traditional water treatment tries to avoid disease transmission by using

more and more chlorine, UVC irradiation or ozone. But the transmission
of pathogens is a biological problem and therefore needs a biological
solution. The approach of the Dryden Aqua integrated water treatment
2 1 3
system does exactly that: Instead of using more powerful disinfections and
expensive equipment, we designed a pool water treatment process that
changes the water to make it difficult for viri, bacterium and parasites to
live and reproduce

PREVENT INSTEAD OF KILLING!

1.No substrate: As a consequence of our bio-resistant AFM”, bacterium

have no substrate on which they can grow and multiply.

2.No nutrients: We remove food for bacteria by advanced coagulation,

variable speed pump flocculation and filtration. Bacterium cannot grow 1 Filtration with AFM®
anymore.
2 Coagulation and flocculation with APF and ZPM
3.The lower the chlorine demand, the lower the disinfection by-products
3 Catalytic oxidation with ACO
(DBP’S): DAISY filters almost everything out of the water and reduces
the chlorine demand to the lowest level possible. The lower the chlorine
oxidation demand, the lower the concentration of chlorine disinfection
by-products in the water and in the air. AFM® stands for Activated Filter
Media, a revolutionary filter media made from green container glass,
developed by marine biologist Dr. Howard Dryden. AFM® exceeds
To produce one ton of AFM’, 1.8 tons of green glass is needed. AFM is
the performance of quartz and glass sand by filtering 30 % - 50 % more
produced according to ISO 9001-2008 standards. We now also have
organics and sub 5 micron particles out of the water. The catalytic
the world’s most important certification for drinking water: NSF 61.
properties on the surface of AFM® make it self—sterilizing and bio-resistant,
which means no biofilm is formed in the filter bed. This reduces the chlorine
demand and therefore the formation of harmful volatile disinfection by
Advantages:
products such as THM’s, cyanogen chloride and trichloramine. Not only
the chlorine smell but also the risk of getting infected by pathogens like
Legionella or cryptosporidium, is greatly reduced. The pool is healthier for • Crystal clear water - AFM® filters at least 30 - 50% more than quartz
or glass sand.
people, especially children, safer for the environment and economical
with crystal clear water. AFM® has been successfully used in over 500,000 • Lower consumption of chlorine - The better the filtration, the lower
public and private swimming pools worldwide. the chlorine demand.

• No trichloramine - no chlorine smell AFM® prevents growth of

biofilm.
AFM® — ACTIVATED FILTER MEDIA 10
• No biofilm, no Legionella - Biofilm is a home for pathogens such as
Legionella.
AFM® is a unique bio resistant filter media. The raw material used for
AFM” is green container glass. The glass is washed, disinfected, thermally • Perfection for chlorine-free systems - AFM® greatly reduces the
treated and then reduced to a very specific grain size and shape. For oxidation demand.
security reasons, the production process (cyclonic size reduction) assures
that no dangerous glass splinters are present in the filter media. After size
reduction, the grains are activated in a patented three step process. This
creates a mesoporous structure with a huge catalytic surface area of
50’000 m2 per m3. The surface area is 300 times larger than the surface
area of sand or other glass filter media. The surface area is important for all
adsorptive and catalytic reactions. In contact with the water free radicals
(OH-radicals) are formed, which protect the surface from bio-fouling. The
larger the surface area the higher performance and bio— resistance you
will get from the media.

42 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
 01
POOL FILTRATION

AFM® - ACTIVATED FILTER MEDIA

The graph opposite shows the latest test results (July 2014) from IFTS (Institut Filter filling:
de la Filtration et des Téchniques Séparatives, www.ifts—sls. com). Dryden Aqua recommends the following layers:

Different glass filter media and sands were tested. The experiment was WITHOUT AFM® 0 WITH AFM® 0
done without flocculation and at a filtration rate of 20m3/h to get a
70% AFM® 1 20% AFM® 0
representative comparison. AFM® 1 will remove more than 95% of all
particles in the water down to 4 microns. The best a new, very high quality 15% AFM® 2 as supporting layer 50% AFM® 1
sand or other glass filter media can achieve is 20 microns at an efficiency
15% AFM® 3 as supporting layer 30% AFM® 2 and
of 95%. In addition, the filtration performance with AFM® will stay at this
AFM® 3 as supporting layer
high level for many years.

• AFM® 0 has been developed for best filtration where flocculation

cannot be used.

• AFM® 0 is able to remove particles of 1 micron at an efficiency of

more than 95%.

• AFM® 0 cannot be combined with flocculation. The backwash

speed should be about

• 30 m3/h.

Important:
For smaller filters (<1000 mm diameter) and for all filters with nozzle plate,
irrespective of filter diameter, use 70% of AFM®1 and 30% of AFM®2.
AFM®3 is for larger diameter filters to ensure adequate filtration.

Models
WEIGHT VOLUME
CODE DESCRIPTION PACKING
kg m3

AFM-00 AFM® GRADE 0 0.25 - 0.5 mm 1 25 0.015

AFM-01 AFM GRADE 1 0.5 - 1.0 mm
®
1 25 0.015
AFM-02 AFM® GRADE 2 1.0 - 2.0 mm 1 25 0.015
AFM-03 AFM® GRADE 3 2.0 - 4.0 mm 1 25 0.015

AQUA-ME.AE 43
 PUMPS & COUNTER CURRENT

02

SELF PRIMING PUMP

01 “EUROSWIM”

Technical features
An extremely quiet and highly efficient self-priming centrifugal pump with built-in
large capacity pre-filter. The ‘Euroswim’ has been developed primarily for water
circulation and filtration in residential swimming pools, but is also ideal for the
commercial sector where it can handle aggressive liquids such as those found in
fish farms, agriculture and industry.

• Fibreglass reinforced technopolymer body, impellar and diffuser

• Nylon strainer to prevent debris from entering the system

• Clear antioxidant polycarbonate strainer lid for visibility during operation

• Electrical motor shaft in stainless steel AISI 416

(Completely insulated from the water flow)

• Mechanical seal made in carbon, alumina, NBR and AISI 316

• Pump body O-rings in NBR, threaded fasteners and reinforcing rings in

AISI 304 Dimensions
• Butterfly drain plugs for easy removal and fitting. No tools necessary

• Asynchronous continuous duty 2-pole motor (S1) with generous range of

power ratings from 0.5 HP to 3 HP, single phase and 3-phase

• Motor casing in die-cast aluminium with electrophoresis surface

treatment to prevent oxidation, even in aggressive environmental
conditions

• Baseplate with rubber mounts to reduce vibration transmission

• Single phase version with integral thermal and over current protection
and permanent split capacitor (PSC), assembled inside the terminal box
for all versions.

• Power supply: Single phase 220-240V 50Hz, 3-phase 230/400V 50Hz,

60Hz on demand

• Operating range: Up to 42m3/h with pressure head up to 22m

• Maximum liquid temperature: 60° C

• Maximum ambient temperature: +50° C

• Motor: 2900 RPM

• Maximum operating pressure: 2.5 bar

• Protection rating: IPX5

• Insulation rating: Class F

Models
CONNECTION INTENSITY A DIMENSIONS WEIGHT VOLUME
CODE PACKING
DNA/DNM II 230 III 230 III 400 A B C D E H H1 H2 kg m3
EUROSWIM 50M 2” 4.2 - - 536 242 242 257 265 351 222 314 1 16 0.086
EUROSWIM 75M 2” 5 - - 552 242 245 257 265 351 222 314 1 16.5 0.086
EUROSWIM 75 T 2” - 3.5 2 552 242 245 257 265 351 222 314 1 16.5 0.086
EUROSWIM 100 M 2” 6.3 - - 552 242 245 257 265 351 222 314 1 17 0.086
EUROSWIM 100 T 2” - 4 2.4 552 242 245 257 265 351 222 314 1 17 0.086
EUROSWIM 150M 2” 7 - - 574 250 290 267 274 387 258 350 1 22 0.10
EUROSWIM 150 T 2” - 6.5 3.7 574 250 290 267 274 387 258 350 1 22 0.10
EUROSWIM 200 M 2” 8.6 - - 648 250 290 267 274 387 258 350 1 24 0.10
EUROSWIM 200 T 2” - 7.2 4 574 250 290 267 274 387 258 350 1 22 0.10
EUROSWIM 300 M 2” 12 - - 648 252 290 267 274 387 258 350 1 24.5 0.10
EUROSWIM 300 T 2” - 8.7 5 648 252 290 267 274 387 258 350 1 24.5 0.10

48 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
PUMPS & COUNTER CURRENT

02

HYDRAULIC FEATURES:

HEIGHT
SINGLE PHASE
THREE PHASE MODELS 4 6 8 10 12 14 16 18 20 22 24
MODELS
(m)

EUROSWIM 50M - - 17 15 11 - - - - - - -
EUROSWIM 75M EUROSWIM 75 T - 20 17 14 11 - - - - - -
EUROSWIM 100 EUROSWIM 100 T FLOW - 23 21 17 15 9 - - - - -
EUROSWIM 150 EUROSWIM 150 T (m3/h) - 30 27 23 20 14 7 - - - -
EUROSWIM 200 EUROSWIM 200 T 36 34 31 29 26 21 14 4 - - -
EUROSWIM 300 EUROSWIM 300 T - - 42 40 37 33 30 24 16 3 -

ELECTRIC FEATURES:

PUMP MODEL INPUT POWER P1 KW MOTOR POWER P2 NOISE LEVEL

50HZ 240-220*1~V 400-230*3~V kW HP MAX db A

EUROSWIM 50M 900 - 0.33 0.5 60

EUROSWIM 75 M 1000 - 0.5 0.75 60
EUROSWIM 100 M 1300 - 0.75 1 60
EUROSWIM 150 M 1600 - 1.1 1.5 60
EUROSWIM 200 M 1900 - 1.5 2 60
EUROSWIM 300 M 2800 - 2.2 3 60
EUROSWIM 75 T - 950 0.5 0.75 60
EUROSWIM 100 T - 1200 0.75 1 60
EUROSWIM 150 T - 1500 1.1 1.5 60
EUROSWIM 200 T - 1900 1.5 2 60
EUROSWIM 300 T - 2800 2.2 3 60

AQUA-ME.AE 49
STAINLESS STEEL SKIMMERS
WITH REMOVABLE BASKET
• Made in AISI-316L stainless steel
• Horizontal skimmer for level channel
• Front removable basket
• Includes electrical sensor for automatic filling

FLOW RATE DIMENSIONS WEIGHT VOLUME

POOL CODE PACKING
m3/h A B C D E F G ØI ØL kg m3
19120 8 275 170 250 148 205 391 76 2”F 1”F 1 8 0.030
19122 10 475 170 450 148 205 391 76 2”F 1”F 1 11 0.036
19124 12 675 170 650 148 205 391 76 2”F 1”F 1 15 0.084
Concrete
19120R 8 275 170 250 148 205 391 76 2”F 1”F 1 8 0.030
19122R 10 475 170 450 148 205 400 76 2”F 1”F 1 11 0.036
19124R 12 675 170 650 148 205 600 76 2”F 1”F 1 15 0.084
19121 8 275 170 250 148 205 391 76 2”F 1”F 1 9 0.030
19123 10 475 170 450 148 205 391 76 2”F 1”F 1 12 0.036
19125 12 675 170 650 148 205 391 76 2”F 1”F 1 16 0.084
Liner
19121R 8 275 170 250 148 205 391 76 2”F 1”F 1 9 0.030
19123R 10 475 170 450 148 205 400 76 2”F 1”F 1 12 0.036
19125R 12 675 170 650 148 205 600 76 2”F 1”F 1 16 0.084
1 19131 Control panel for automatic filling 1
STAINLESS STEEL ORIENTAL WALL INLETS
• Made of AISI-316 L stainless steel

• Suitable for concrete and liner installations

¸ g
ØA ,
C_,
_
Stai

ØB
B

r
k

DIMENSION FLOW RATE AT SPEED WEIGHT VOLUME

POOL CODE PACKING
A B C 4 m/s m3/h kg m3
F-218 100 1½” 42 4 1 1 0.009
Concrete F-219 104 2” 42 6 1 1 0.009
F-220 135 3” 50 13 1 2 0.018
F-221 96 1½” 47 4 1 1 0.009
Liner F-222 106 2” 50 6 1 1 0.009
F-223 137 3” 52 13 1 2 0.018
STAINLESS STEEL
HYDROMASSAGE
INLET - ORIENTABLE
• Manufactured in stainless steel with a polished finish
• Available for concrete or liner pools

FLOW RATE DIMENSIONS WEIGHT VOLUME

CODE DESCRIPTION PACKING
m /h
3
A B C D E F kg m3

17013 Standard hydromassage inlet- 1” for Concrete 2.5 76 1” 3/4“ - 70 80 1 0.7 0.001

17014 Standard hydromassage inlet- 1” for Liner 2.5 76 1” 3/4“ - 70 80 1 1 0.001

17001 Wall inlet Standard threaded- 11/2” for Concrete 4 102 11/2” 1” 3/8” 76 75 1 1 0.002

17002 Wall inlet Standard threaded- 2” for Concrete 6 105 2” 1” 3/8” 76 75 1 1 0.003

17003 Wall inlet Standard threaded- 3” for Concrete 8.5 130 3” 11/2” 1/2” 102 105 1 2.5 0.004

17004 Wall inlet Standard threaded- 11/2” for Liner 4 102 11/2” 1” 3/8” 76 75 1 1.5 0.002

17005 Wall inlet Standard threaded- 2” for Liner 6 105 2” 1” 3/8” 76 75 1 2.5 0.003
17006 Wall inlet Standard threaded- 3” for Liner 8.5 145 3” 11/2” 1/2” 102 105 1 3 0.004
 25 AIR BLOWERS

SIDE CHANNEL BLOWERS

• Maintenance free due to permanently greased external
bearings, non-contact impellers and fan cooled motors

• Environmentally safe due to oil-free compression, low energy

consumption and low noise level

• user-friendly and robust

• Lightweight construction. Made of die cast aluminium

• Vertical or horizontally mountable

• Suitable for use with variable speed control

• Worldwide use with 50/60 Hz frequency

• Multiple voltage ranges

• Motor insulation class H

• IP55 protection

• Built-in overheating protection

• CE, UL and CSA certifications

• Customisable to your specific needs

 MAX.VACUUM/ NOISE WEIGHT VOLUME
VOLTAGE POWER FLOW
PHASE CODE PRESSURE LEVEL CONN. PACKING
kg m3
V Hz kw m3/h hPa (mbar) db
ASC0080-1MA370-1 50 0.37 80 -110/110 53 1 ¼’’ 1 11 0.04

ASC0140-1MA800-1 50 0.8 140 -150/160 63 1 ½’’ 1 15 0.04

Single
ASC0210-1MA111-1 230 50 1.1 210 -160/160 64 2’’ 1 21 0.05

ASC0270-1MA151-1 50 1.5 270 -140/120 65 2’’ 1 26 0.06

ASC0315-1MA221-1 50 2.20 315 -190/190 72 2’’ 1 30 0.09

ASC0080-1MA400-6 50 0.4 80 -120/130 53 1 ¼’’ 1 10 0.04

ASC0140-1MA850-6 50 0.85 140 -160/160 63 1 ½’’ 1 16 0.04

Δ 200 - 240
Three ASC0210-1MA131-6 50 1.3 210 -170/170 64 2’’ 1 22 0.05
Y 345 - 415
ASC0270-1MA131-6 50 1.3 270 -100/100 65 2’’ 1 23 0.06

ASC0315-1MA221-6 50 2.2 315 -200/190 69 2’’ 1 30 0.09

15
STAINLESS STEEL BOTTOM
GRATE COVER
• Made of AISI-316L stainless steel
• Suitable for concrete and liner installations
• Anti-vortex grill

CODE FLOW RATE AT SPEED DIMENSIONS mm WEIGHT VOLUME

PACKING
3
CONCRETE LINER 0.5 m/s m /h A B kg m3

F-165 F-165-L 45 355 x 355 295 x 295 1 4 0.003

F-166 F-166-L 80 455 x 455 395 x 395 1 5 0.006
F-167 F-167-L 140 555 x 555 495 x 495 1 6 0.009
 TEMPERATURE CONTROL

ELECRO EVOLUTION 2
04 ALL TITANIUM
Technical features
A fully titanium heater by Elecro, the Evolution 2, is the latest and
upgraded version of the original Evolution. Boasting 100% efficiency,
safety, and above all, reliability, this compact and robust unit will
effortlessly heat your pool or spa to your desired temperature.

• Ten power options ranging from 1-kW to 24-kW

• Easy installation, fully equipped and pre-wired
• Robust, durable construction
• Ultra-reliable flow switch allows safe operation
• Temperature thermostat and overheating sensor
• Compact, durable design
• Analogue control with 1.2°C differential or digital
control with 0.5°C differential
• Multi-lingual display
• Titanium flow tube and titanium heating element
• Can be floor or vertically wall mounted
• Vortex, long life, stay clean heating element
technology
• 100% efficiency throughout the product life
• Silent operation
Dimensions

14
SPECIFICATIONS

POWER SUPPLY Single phase or three phase

FLOW REQUIREMENTS Minimum flow: 2 kW to 6 kW, 1m³/h / Minimum flow: 9 kW to 24 kW, 4m³/h / Maximum flow: 17m³/h
HEATING ELEMENTS Grade 1 titanium
FLOW TUBE Grade 1 titanium
CONTROL THERMOSTAT Analogue: 0 > 45°C (1.2°C differential) Digital: 0 > 45°C (0.5°C differential)
SAFETY THERMAL CUT OUT 60°C (Manual reset)
FLOW SWITCH Gold tipped reed switch with titanium fulcrum pin
CONTACTOR Siemens 3RT2023 or 3RT2027
SEALS High temperature special formula EPDM ferrules, TPE end fitting gaskets
WATER CONNECTIONS 1.5” BSP female thread supplied with 1½”/50mm stepped ABS unions for rigid pipe
and 1½”/1¼” stepped hose tails for flexible pipe
INGRESS PROTECTION RATING IP 44
FREQUENCY 50/60 Hz
WORKING PRESSURE 4 bar maximum
MOUNTING Floor or wall mounting

390 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
TEMPERATURE CONTROL

UP TO 6-KW SINGLE PHASE

9 & 12-KW SINGLE PHASE

15 & 18-KW SINGLE PHASE

& ALL 3-PHASE

Models

POWER OUTPUT LOAD DIMENSIONS WEIGHT VOLUME

CODE CURRENT PACKING
kW Amp L kg m3
E2-1-1 1 6 462 1 5.5 0.059
E2-1-2 2 9 462 1 5.5 0.059
E2-1-3 3 13 462 1 5.5 0.059
E2-1-4 4.5 20 462 1 5.5 0.059
220~240V
E2-1-6 6 27 462 1 5.5 0.059
Single phase
E2-1-9 9 40 462 1 5.8 0.059
E2-1-12 12 53 462 1 5.8 0.059
E2-1-15 15 66 462 1 6.6 0.059
E2-1-18 18 79 462 1 6.6 0.059
E2-V-6 6 27/9 592 1 6.6 0.059 14
230~400V
E2-V-9 9 40/13 592 1 6.6 0.059
Single/3 phase
E2-V-12 12 53/18 592 1 6.6 0.059
E2-3-15 15 22 592 1 6.6 0.059
400V
E2-3-18 18 26 592 1 6.6 0.059
3 phase
E2-3-24 24 35 592 1 6.6 0.059
E2D-1-1 1 6 592 1 6.6 0.059
E2D-1-2 2 9 592 1 6.6 0.059
E2D-1-3 3 13 592 1 6.6 0.059
E2D-1-4 4.5 20 592 1 6.6 0.059
220~240V
E2D-1-6 6 27 592 1 6.6 0.059
Single phase
E2D-1-9 9 40 592 1 6.6 0.059
E2D-1-12 12 53 592 1 6.6 0.059
E2D-1-15 15 66 592 1 6.6 0.059
E2D-1-18 18 79 592 1 6.6 0.059
E2D-V-6 6 27/9 592 1 6.6 0.059
230~400V
E2D-V-9 9 40/13 592 1 6.6 0.059
Single/3 phase
E2D-V-12 12 53/18 592 1 6.6 0.059
E2D-3-15 15 22 592 1 6.6 0.059
400V
E2D-3-18 18 26 592 1 6.6 0.059
3 phase
E2D-3-24 24 35 592 1 6.6 0.059
Note:for other voltages in the 3phase heaters please add -415 or -380 after the code

AQUA-ME.AE 391
 CHEMICAL DOSING EQUIPMENTS

A-POOL TOP +
Technical features
• Control panel ON-OFF / proportional regulation of pH and Chlorine from
0-2 and 0-5 ppm for public and private pools composed by:
• N.1 1 AE START+ “PH-RX or PH-CL(J)” with 2 measure
• N.2 HC151+ PIMA (M70) adjustable on 3 models
• Modular probe holder for pH probes + RX electrode (only for RX series)
• Chlorine cell (Pt-Cu) complete with PH Electrode (only for CL series)
• Amperometric membrane probe for free chlorine with PH Electrode
output signal in mV (only for CLJ series)
• Complete with flow sensor and flow regulator
• Temperature probe
• pH Buffer solutions CODE STANDARD VERSION
• 2 level probes
• Power supply: 110-240V 50/60Hz Pump body PVDF

Pump Housing PP

08 Standards:
• No. 2004/108/CE EMC directive
Diaphragm PTFE

• No. 2006/95/CE ‘DBT low voltage directive’ Balls CE

• No. 2011/65/UE, 2002/96/CE ‘RoHS and WEEE directives’ Body valve PVDF

O-rings Viton®
Package dimensions:
Spring loaded injection
• L 660mm x H 800mm x W 250mm
valve
PVDF - Hastelloy - PTFE

A-POOL SYSTEM Foot valve

Power supply
PVDF

110-240 v

Models
SUITABLE FOR POOLS UP TO WEIGHT VOLUME
CODE TYPE PROBE SIGNAL PUMP TYPE WATT TUBE PACKING
Indoor Outdoor kg m3
ADPT+055 PH-RX PH-RX - M60 40 4x6 200 m 3
150 m3
1 10 0.1

ADPT+050 PH-RX PH-RX - M70 40 4x6 500 m3 400 m3 1 10 0.1

ADPT+060 PH-RX PH-RX - M80 50 4x6 1000 m3 800 m3 1 10 0.1

ADPTC070 PH-RX PH-RX - Dosing panel & accessories without pumps for large pools 1 10 0.1

ADPT+105 PH-CL PH-CU mV M60 40 4x6 200 m 3

150 m3
1 10 0.1

ADPT+100 PH-CL PH-CU mV M70 40 4x6 500 m3 400 m3 1 10 0.1

ADPT+110 PH-CL PH-CU mV M80 50 4x6 1000 m3 800 m3 1 10 0.1

ADPT+120 PH-CL PH-CU mV Dosing panel & accessories without pumps for large pools 1 10 0.1

ADPT+205 PH-CL(J) PH-CLJ mV(*) M60 40 4x6 200 m 3

150 m3
1 10 0.1

ADPT+200 PH-CL(J) PH-CLJ mV(*) M70 40 4x6 500 m3 400 m3 1 10 0.1

ADPT+210 PH-CL(J) PH-CLJ mV(*) M80 50 4x6 1000 m3 800 m3 1 10 0.1

ADPTC220 PH-CL(J) PH-CLJ mV(*) Dosing panel & accessories without pumps for large pools 1 10 0.1

INSTALLATION KIT

CODE DESCRIPTION
x2 x2 x4 x4 x2 x2

KITPDE503 Installation kit A-POOL TOP + PH-CL

x2 x2 x4 x4 x2 x2

KITPDE504 Installation kit A-POOL TOP + PH-CLJ

x2 x2 x4 x4 x2 x2

KITPDE515 Installation kit A-POOL TOP + mod.

222 AQUA MIDDLE EAST / POOL, SPA, FOUNTAIN EQUIPMENT & ACCESSORIES CATALOGUE 2023
 CODE MODEL SIZE (Ø X H ) VOLUME (L/H)

ADTANK010 PE tank 500 x 680 100 L

ADTANK020 PE tank 620 X 800 200 L

ADTANK030 PE tank 710 X 890 300 L

 CODE MODEL SEALING HEIGHTS CONNECTOR CONNECTIONS TANKS

ADLASM10BO Sunction lance GL-VT 115-600 BNC 4X6 60-100 L

ADLASM30BO Sunction lance GL-VT 115-840 BNC 4X6 200-300 L

AG-S
Technical features
08
• Slow water mixers.
• Slow single-phase AG1-PVC /AG1-AISI 70 rpm – Motor 230V 50Hz 0.12HP
• Slow speed three-phase - AG3-PVC/AG3-AISI -70 rpm – Motor 230/380v - 50 Htz - 0.12HP.

Dimensions

Models
CODE TANK WEIGHT VOLUME
SIZE MATERIAL PACKING
SINGLE-PHASE THREE-PHASE
L kg m3
SPEED 70 RPM SPEED 1400 RPM
ADAG1P06F ADAG3P06S A - TANK 1 100 PVC 1 6 0.03

ADAG1P07F ADAG3P07S A - TANK 2-3 200 - 300 PVC 1 7 0.05

ADAG1P08F ADAG3P08S A - TANK 5 500 PVC 1 7 0.05

ADAG1P09F ADAG3P09S A - TANK 10 1000 PVC 1 7 0.05

ADAG1A06F ADAG3A06S A - TANK 1 100 AISI 1 6 0.03

ADAG1A07F ADAG3A07S A - TANK 2-3 200 - 300 AISI 1 7 0.05

ADAG1A08F ADAG3A08S A - TANK 5 500 AISI 1 7 0.05

ADAG1A09F ADAG3A09S A - TANK 10 1000 AISI 1 7 0.05