Data sheet 6AG1123-3DB32-2AW0

SIPLUS HMI MTP400, Unified Basic Panel, based on 6AV2123-3DB32-0AW0 with

conformal coating -20 ...+50 °C touch operation 4" widescreen TFT display, 16
million colors, PROFINET interface, configurable as of WinCC Unified Basic V18
Update 3, contains open-source software, which is provided free of charge see
enclosed Blu-ray

General information
Product type designation MTP400 Unified Basic
based on 6AV2123-3DB32-0AW0
Display
Design of display TFT
Screen diagonal 4.3 in
Display width 93.6 mm
Display height 56.2 mm
Number of colors 16 777 216
Resolution (pixels)
● Horizontal image resolution 800 pixel
● Vertical image resolution 480 pixel
Backlighting
● MTBF backlighting (at 25 °C) 20 000 h; At 25°C
● Backlight dimmable Yes; 10 ... 100%
Control elements
Keyboard fonts
● Numeric keyboard Yes; Onscreen keyboard
● alphanumeric keyboard Yes; Onscreen keyboard
Touch operation
● Design as touch screen Yes
● Design as multi-touch screen Yes
● Monitor keyboard Yes
Installation type/mounting
Mounting position vertical
Mounting in portrait format possible Yes
Mounting in landscape format possible Yes
maximum permissible angle of inclination without external 35°
ventilation
Supply voltage
Type of supply voltage DC
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Input current
Current consumption (rated value) 0.16 A
current consumption (for rated value of supply voltage), min. 0.14 A
current consumption (for rated value of supply voltage), max. 0.47 A
Current consumption, max. 0.63 A; at 19.2 V
Starting current inrush I²t 0.45 A²·s

6AG11233DB322AW0 Subject to change without notice

9/7/2025
Page 1/6 © Copyright Siemens
Power
Active power input, typ. 3.8 W
Processor
Processor type ARM
Memory
Flash Yes
RAM Yes
Type of output
Acoustics
● Buzzer No
● Speaker No
Time of day
Clock
● Hardware clock (real-time) Yes
● Software clock Yes
● retentive Yes; Back-up duration typically 6 weeks
● synchronizable Yes
Interfaces
Number of industrial Ethernet interfaces 1; Gigabit Ethernet (IE/PN), RJ45
Number of RS 485 interfaces 0
Number of RS 422 interfaces 0
Number of USB interfaces 2; USB 2.0
Number of parallel interfaces 0
Number of SD card slots 0
Industrial Ethernet
● Industrial Ethernet status LED 2
● Number of ports of the integrated switch 1
Protocols
PROFINET Yes
Supports protocol for PROFINET IO No
IRT No
MPI No
Protocols (Ethernet)
● TCP/IP Yes
● DHCP Yes
● SNMP Yes
● DCP Yes
● LLDP Yes
Redundancy mode
Media redundancy
— MRP No
Further protocols
● CAN No
EMC
Emission of radio interference acc. to EN 55 011
● Limit class A, for use in industrial areas Yes
● Limit class B, for use in residential areas No
Degree and class of protection
IP (at the front) IP65
IP (rear) IP20
NEMA (front) NEMA 4, NEMA 4x (when installed)
● Enclosure Type 4 at the front Yes
● Enclosure Type 4x at the front Yes
● Enclosure Type 12 at the front No
Standards, approvals, certificates
Ecological footprint
● environmental product declaration Yes
Global warming potential
— global warming potential, (total) [CO2 eq] 89.7 kg
— global warming potential, (during production) [CO2 16.2 kg

6AG11233DB322AW0 Subject to change without notice

9/7/2025
Page 2/6 © Copyright Siemens
 eq]
— global warming potential, (during operation) [CO2 74.4 kg
eq]
— global warming potential, (after end of life cycle) -1.09 kg
[CO2 eq]
Ambient conditions
Ambient temperature during operation
● At cold restart, min. 0 °C
Operation (vertical installation)
— For vertical installation, min. -20 °C; = Tmin; Startup @ 0 °C
— For vertical installation, max. 50 °C; = Tmax
Operation (max. tilt angle)
— At maximum tilt angle, min. -20 °C; = Tmin; Startup @ 0 °C
— At maximum tilt angle, max. 40 °C; = Tmax
Operation (vertical installation, portrait format)
— For vertical installation, min. -20 °C; = Tmin; Startup @ 0 °C
— For vertical installation, max. 40 °C; = Tmax
Operation (max. tilt angle, portrait format)
— At maximum tilt angle, min. -20 °C; = Tmin; Startup @ 0 °C
— At maximum tilt angle, max. 35 °C; = Tmax
Ambient temperature during storage/transportation
● min. -20 °C
● max. 60 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m
● Ambient air temperature-barometric pressure-altitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax
- 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K)
at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
Relative humidity
● With condensation, tested in accordance with IEC 60068- 100 %; RH incl. condensation / frost (no commissioning in bedewed state),
2-38, max. horizontal installation
Resistance
Coolants and lubricants
— Resistant to commercially available coolants and Yes; Incl. diesel and oil droplets in the air
lubricants
Use in stationary industrial systems
— to biologically active substances according to EN Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna);
60721-3-3 Class 3B3 on request
— to chemically active substances according to EN Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity
60721-3-3 degree 3); *
— to mechanically active substances according to EN Yes; Class 3S4 incl. sand, dust, *
60721-3-3
Use on ships/at sea
— to biologically active substances according to EN Yes; Class 6B2 mold, fungal and dry rot spores (excluding fauna)
60721-3-6
— to chemically active substances according to EN Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity
60721-3-6 degree 3); *
— to mechanically active substances according to EN Yes; Class 6S3 incl. sand, dust; *
60721-3-6
Usage in industrial process technology
— Against chemically active substances acc. to EN Yes; Class 3 (excluding trichlorethylene)
60654-4
— Environmental conditions for process, measuring Yes; Level GX group A/B (excluding trichlorethylene; harmful gas
and control systems acc. to ANSI/ISA-71.04 concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level
LC3 (salt spray) and level LB3 (oil)
Remark
— Note regarding classification of environmental * The supplied plug covers must remain in place over the unused interfaces
conditions acc. to EN 60721, EN 60654-4 and during operation!
ANSI/ISA-71.04
Conformal coating
● Coatings for printed circuit board assemblies acc. to EN Yes; Class 2 for high reliability
61086
● Protection against fouling acc. to EN 60664-3 Yes; Type 1 protection
● Military testing according to MIL-I-46058C, Amendment 7 Yes; Discoloration of coating possible during service life
● Qualification and Performance of Electrical Insulating Yes; Conformal coating, Class A
Compound for Printed Board Assemblies according to IPC-
CC-830A

6AG11233DB322AW0 Subject to change without notice

9/7/2025
Page 3/6 © Copyright Siemens
Operating systems
proprietary Yes
configuration / header
Message indicator Yes
Alarm system (incl. buffer and acknowledgment) Yes
Recipe management Yes
Configuration software
● WinCC Advanced (TIA Portal) Yes
● WinCC Professional (TIA Portal) Yes
● WinCC Unified Basic Engineering (TIA Portal) Yes
● WinCC Unified Comfort Engineering (TIA Portal) Yes
● WinCC Unified PC Engineering (TIA Portal) Yes
Languages
Online languages
● Number of online/runtime languages 32
Project languages
● Languages per project 32
Functionality under WinCC Unified
Libraries Yes
Applications/options No
Number of Visual Basic Scripts No
JavaScript Yes
Task planner
● time-controlled Yes
● task-controlled Yes
Help system
● Number of characters per info text 70
● Number of message texts per message 10
functionality under WinCC Unified / alarm system / header
● Number of alarm classes 32
● Bit messages
— Number of bit messages 2 000
● Analog messages
— Number of analog messages 100
● S7 alarm number procedure Yes
● System messages HMI Yes
● System event, more (SIMATIC S7, SINUMERIK, Yes
SIMOTION, ... )
● Number of characters per message 512
● Number of process values per message 10
● Acknowledgment groups Yes
● Message indicator No
● Message buffer Yes; Configured as alarm archive
— Circulating buffer Yes
— retentive Yes
— maintenance-free Yes
Parameter set management (recipes)
● Number of parameter set types 250
● Parameter sets per parameter set type 250
● Entries per parameter set 250
● Size of internal parameter set memory 5 Mbyte
● Parameter set memory expandable Yes
functionality under WinCC Unified / variables / header
● Number of variables per device 1 000
● Number of variables per screen 300
● Limit values Yes
● Structures Yes
● Arrays Yes
functionality under WinCC Unified / screens / header
● Number of configurable images 300
● Faceplate Yes

6AG11233DB322AW0 Subject to change without notice

9/7/2025
Page 4/6 © Copyright Siemens
Image objects
● Number of objects per image 600
● Picture window Yes
● Text fields Yes
● I/O fields Yes
● Graphic I/O fields (graphics list) Yes
● Symbolic I/O fields (text list) Yes
● Scalable Vector Graphics (SVG) Yes
● Date/time fields Yes
● Checkbox Yes
● Option button Yes
● Switches Yes
● Buttons Yes
● Graphic display Yes
● Icons Yes
● Custom web display No
● Geometric objects Yes
functionality under WinCC Unified / complex screen objects / header
● Number of complex objects per screen 5
● Alarm view Yes
● Trend view Yes
● User view Yes
● Status/control Yes
● Parameter set display Yes
● HTML browser Yes
● Bar graphs Yes
● Sliders Yes
● Pointer instruments Yes
● Analog/digital clock Yes
functionality under WinCC Unified / lists / header
● Number of text lists per project 300
● Number of entries per text list 250
● Number of graphics lists per project 100
● Number of entries per graphics list 250
functionality under WinCC Unified / archiving / header
● Number of archives per device 10
● Number of entries per archive 50 000
● Message archive Yes
● Process value archive Yes
● type of archiving / for WinCC Unified
— Sequential archive Yes
— Short-term archive Yes
● storage location / of archiving / for WinCC Unified
— Memory card No
— USB memory Yes
— Ethernet No
Security
● Number of roles 50
● Number of function rights 0; V18
● Number of users 200
● Password export/import Yes
● Central user administration Yes
functionality under WinCC Unified / transfer (upload/download) / header
● USB Yes
● Ethernet Yes
● using external storage medium Yes
Process coupling
● S7-1200 Yes
● S7-1500 Yes
● S7-200 No
● S7-300/400 Yes

6AG11233DB322AW0 Subject to change without notice

9/7/2025
Page 5/6 © Copyright Siemens
 ● Number of S7 connections 8
● LOGO! Yes; over Modbus
● SIMOTION No
● OPC UA Client Yes
● OPC UA Server No
● Software Controller/Open Controller No
functionality under WinCC Unified / service tools/configuration tools / header
● Backup/Restore manually Yes
● Backup/Restore automatically No
● Simulation Yes
● Device switchover Yes
Peripherals/Options
Peripherals Barcode reader
Printer No
SIMATIC HMI MM memory card: Multi Media Card No
SIMATIC HMI SD memory card: Secure Digital memory card No
SIMATIC HMI CF memory card Compact Flash Card No
USB memory Yes
SIMATIC IPC USB Flashdrive (USB stick) Yes
SIMATIC HMI USB stick Yes
Network camera No
Mechanics/material
Enclosure material (front)
● Plastic Yes
Dimensions
Width of the housing front 140 mm
Height of housing front 116 mm
Mounting cutout, width 123 mm
Mounting cutout, height 99 mm
Overall depth 36 mm
Weights
Weight (without packaging) 0.45 kg
Weight (with packaging) 0.53 kg
Classifications
Version Classification

eClass 14 27-33-02-01
eClass 12 27-33-02-01
eClass 9.1 27-33-02-01
eClass 9 27-33-02-01
eClass 8 27-24-23-02
eClass 7.1 27-24-23-02
eClass 6 27-24-23-02
ETIM 10 EC001412
ETIM 9 EC001412
ETIM 8 EC001412
ETIM 7 EC001412

Approvals / Certificates
General Product Approval Environment

China RoHS

last modified: 8/27/2025

6AG11233DB322AW0 Subject to change without notice

9/7/2025
Page 6/6 © Copyright Siemens