100% found this document useful (1 vote)
58 views37 pages

KC Cobra Kiddie Ride Service Manual Family Fun Companies

Uploaded by

Muro Electronics
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
58 views37 pages

KC Cobra Kiddie Ride Service Manual Family Fun Companies

Uploaded by

Muro Electronics
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 37

SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.

COM

To Purchase This Item : Visit Our Website : www.bmigaming.com | Global Sales : + 561.391.7200 | USA / CA : 1.800.746.2255

GAME OPERATION & INSTRUCTION MANUAL


FOR ALL PARTS, SERVICE, AND TECHNICAL SUPPORT
PHONE: 708-598-3720 FAX: 708-598-3720 WWW.FAMILYFUNCOMPANIES.COM

STING INTERNATIONAL, © 2013 ALL RIGHTS RESERVED


SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

THIS GAME IS INTENDED FOR INDOOR USE ONLY


SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

CONTENTS
1. SPECIFICATION................................................................................................................. 1
2. INTRODUCTION ................................................................................................................. 2
2-1 OVERVIEW .................................................................................................................. 2
2-2 IMPORTANT SAFETY INFORMATION ....................................................................... 3
2-3 SET UP ........................................................................................................................ 3
3. PACKAGE CONTENTS...................................................................................................... 4
4. INSTALLATION .................................................................................................................. 4
4-1 LOCATIONS TO AVOID .............................................................................................. 5
4-2 INSTALLING AT SITE .................................................................................................. 5
5. CONNECTING THE POWER CORD .................................................................................. 6
5-1 WIRE HOLDER ............................................................................................................ 6
6. PARTS DESCRIPTION....................................................................................................... 7
6-1 GAME APPEARANCE and FEATURES ...................................................................... 7
6-2 TICKET MECHANISM(ENTROPY) ......................................................................... 8
6-3 BILL ACCEPTOR OPTION (OPERATOR INSTALLED) .............................................. 9
6-4 COIN MECHANISM(MECHANICAL)D-200 ........................................................... 12
6-5 TRUNK ....................................................................................................................... 14
7. SERVICE ............................................................................................................................. 15
8. CONTROL SIGNAL AND INSTRUCTION ........................................................................ 18
8-1 PCB LAYOUT ............................................................................................................ 18
8-2 HOW TO ENTER INTO MENUS ................................................................................ 18
9. INSTRUCTION OF GAME PLAY ..................................................................................... 23
10. GENERAL TROUBLESHOOTING ................................................................................... 25
11. PART LIST ........................................................................................................................ 26
11-1 BASE MECHANICAL ASSY..................................................................................... 26
11-2 HARDWARE COMPONENT .................................................................................... 28
11-3 MACHINE PARTS LIST ........................................................................................... 30
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

1. SPECIFICATION

(1) Dimension: L2070mm,W1080mm,H1170mm


W43” x D81” x H44”
(2) Weight: 164KG 331 Lbs.
(3) Voltage: AC 110V -120V 50Hz-60Hz;
(4) Power: 68W-450W(when playing, the more load, the higher the power required)
(5) Current:0.9A-6A
Note:Please refer to the nameplate at the back of game for the actual voltage
(6) Environment: (indoor) temperature -10℃~+40℃; humidity ≤90% ; pressure 86Pa~106Pa

Note: Game parameters are subject to change without notice.

1
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

2. INTRODUCTION
2-1 OVERVIEW
Thank you for purchasing the KC-COBRA video game ride.

This owner’s Manual is intended to provide detailed descriptions together with all the
necessary information regarding the general operation of electronic assemblies, servicing
control, spare parts, etc., pertaining to the game.

This manual is intended for the owner, operator, personnel and managers in charge of
operation of the product. Operate the product after carefully reading and sufficiently
understanding the instructions. If the product fails to function satisfactorily, non-technical
personnel should under no circumstances attempt to service the internal system.

To Maintain Safety:
To ensure the safe usage of the product, be sure to read the following before using the
product. The following instructions are intended for the users, operators and the personnel in
charge of the operation of the product. After carefully reading and sufficiently understanding the
warning display and cautions, handle the product appropriately. Be sure to keep this operation
manual nearby the product or elsewhere convenient for referring to it when necessary.

For the safe usage of the product, the following pictographs are used:
Indicates: “HANDLE WITH CARE”. In order to protect the human body and equipment,
this display is attached to places where the instruction manual should be referred to.
Indicates: a “PROTECTIVE EARTH TERMINAL”. Before operating the equipment, be
sure to connect it to the ground. (The step may be omitted for products in which a power cable
with earth is used.)

 Be sure to understand the contents of the displays before operating the equipment or
reading the text.
Indicates that mishandling the product by disregarding this pictograph
DANGER may cause severe injury or even death.
Indicates that mishandling the product by disregarding this warning may
WARNING cause a potentially hazardous situation which can result in death or
serious injury.

CAUTION Indicates that mishandling the product by disregarding this caution may
cause a slight hazardous situation which can result in personal injury
and/or material damage.

2
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

2-2 IMPORTANT SAFETY INFORMATION


 Unplug the game from the AC wall receptacle when servicing this product. Failure to do so
could result in serious injury to yourself or others.
 Use only a GROUNDED AC receptacle. Failure to do so could result in improper operation
or damage to the game and could void your warranty. If you are unsure that your AC
receptacle is properly grounded, have a qualified electrician perform this check for you.
 Always be sure power to the game is turned off when doing even routine maintenance
otherwise, moving parts could activate unexpectedly causing injury.
 This product is heavy, necessitated by the design. When moving this game, be sure you
have adequate help. Use a suitable dolly or hand truck where practical.

2-3 SET UP
 Be sure that the game is on a level surface. If the game is rocking unevenly on the floor
adjust the legs to remove the rocking of the game.
 Be sure to plug the game into the proper A.C. GROUNDED receptacle. Do not use long
extension cords unless absolutely necessary and if so, be sure it is a heavy duty cord of at
least 16 Ga. and no longer than 20 ft. Check the label on the back of the game to make
sure the power requirements of the game match that of your location.
 Turn the game on and check to be sure there are no unusual sounds and that everything
appears to be working correctly.

3
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

3. PACKAGE CONTENTS
Be sure to check that you have received all packages indicated below.
 Game Unit
 Accessories
No. Name Specification Picture Qty. Remark

1 Manual 1 English version

Ticket door、coin door、


2 Key GUO711 2
coin box、service door

Power
3 US Version 1 Per request
code

4 Fuse 10A 1

This machine has included an additional “U” disc for situations caused by power surges.

Function In the event of a sudden surge of power, the video may freeze or the game may
not log in normally. In this case, please take this U disc which is found next to the
main PC and insert into USB port on host PC. After inserting, game system
software will be reinitialized automatically. After installing, game will run normally.
Please put U disc back into the storage port for future use if necessary.

4. INSTALLATION
Check the parts list before installation. Verify that all parts that have been received and are in
good condition

ATTENTION
For indoor use only!

4
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

4-1 LOCATIONS TO AVOID


WARNING
The machine is designed for indoor use only. Never install this machine
outdoors or in any of the following:
● Locations exposed to direct sunlight
● Locations subject to rain or water leakage.
● Unstable locations or locations subject to vibration.
● Dusty, hot, or damp locations.

4-2 INSTALLING ON SITE


The machine must be fixed on level ground. The product is equipped with 4 casters and 4
adjusters. When installation position /site has been determined, have the adjusters come in
direct contact with the floor.
Establish a gap of about 5 mm between the floor and the casters and adjust the unit so that it
will remain level.
① Move the product to the installation site.
② Bring the adjusters into direct contact with the floor. Use a wrench to align the height of the
adjusters until the cabinet is perfectly level.

③ After setting, turn adjuster nuts upwards to tighten them and secure adjuster heights.

5
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

WARNING
 Disconnect game power before moving.
 Make sure all wheels are intact. Replace any wheels that are damaged or
broken before moving the game.
 When moving the game, DO NOT slide the game across the floor.
 Ensure the game is level before connecting the power.
 To insure a long life of your product we recommend always wrapping the
game with soft blankets for moving long distance to protect the finish.

5. CONNECTING THE POWER CORD


BASE

SOCKET WIRE
HOLDER

PLUG
PLUG

5-1 WIRE HOLDER

IEC SOCKET POWER


SWITCH

WARNING
● Do not put heavy items on power cord.

6
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

● Hold the power plug instead of the wire to draw the power cord out of the socket.

● Do not touch the power plug with wet hands.

● Do not draw or twist the cord or store near any high heat source.

● Do not place the cord where the player can easily trip over, or come in contact with it.

● Operate this game with the correct power and fuse configuration.

6. PARTS DESCRIPTION
6-1 GAME APPEARANCE AND FEATURES

7
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

1 BASE:Base Mech
2 PROTECTION SKIRT: Prevent Player from reaching base
3 FIBERGLASS CAR:Main game(KC COBRA)
4 CHROME WHEEL COVER: Decoration
5 19”LCD MONITOR:For game video
6 STEERING WHEEL:Control car on video to move left and right
7 “JUMP” BUTTON:Press JUMP Button to jump car on video
8 TICKET/ DBV DOOR :For ticket version or DBV version. Key GUA71.
9 COIN DOOR:Key GUA711
10 COIN BOX:Key GUA711, collect coin.
11 GAS PEDAL:Speed up car.
12 SPEAKER COVER:Sound.
13 TRUNK:Key GUA711, reach to mainboard, amplifier board, main engine.

6-2 TICKET MECHANISM(ENTROPY)

NOTE
For Ticket version only!

How to fill the ticket


Open the Ticket Door, place the Tickets into the TICKET HOLDER.
Feed the Tickets into the TICKET MECH.
① Unclip and remove the Ticket retainier

Picture 1 Picture 2

8
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

Feed the tickets into the mechanism making sure that the ticket passes through the sensor.

Replace the ticket retainer to secure tickets into position.


Press the TEST button on the PCB to draw tickets through the mechanism and out of the door.
Close the Ticket Door, tear off any excess tickets.

6-3 BILL ACCEPTOR (DBV) OPTION

NOTE
For DBV version only!

 Maintenance
To make sure the bill acceptor always works smoothly, please clean the internal parts every
two weeks to every two months.
To clean the internal parts:

9
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

1. Press the buttons on the sides of bill path unit and pull the unit out.

2. Use a soft, dry cloth or towel to clean the bill path and sensors.

CAUTION
Do not use an organic solvent such as gasoline or paint thinner to clean the unit.

 Trouble Shooting (Continued on the next page)

10
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

DIAGNOSTICS Bezel LED (Green LED)


LED ON = OK
LED OFF =POWER OFF

LED Flashes Status Corrective Actions

1 Bill jammed Remove the bill box by sliding


the top button and the bill path
unit (as above figure), and then
remove the jammed bill.

2 Disable Inspect for right DIP switch


setting.

3 Recognition sensor error. Inspect for foreign objects on


sensor or bill path and clean.

3+2 Hook sensor error. Inspect for foreign objects on


security
11
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

3+5 Out sensor error. Inspect for foreign objects on


(Optional) sensor or bill path and clean.

5 Bill box has been removed. Replace the bill box.

6 Stacker error or stacker full. Empty the bill box.

7 Motor error. Inspect for foreign objects on bill


path and clean.

6-4 COIN MECH(MECHANICAL)D-200


(Aluminum; adjustment, reject iron material coin)
Scope of dimension :D=25mm-25.5mm, T=1.8mm
DC12V+/-2V,temperature -30-+120°;

12
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

1 COIN SLOT 2 REJECT BUTTON 3 REJECT SLOT 4 SWITCH


5 SCREW FOR ADJUSTMENT 6 ADJUSTMENT ROD 7 SCREW

Press Reject Button, the jamming coin will come out to the Reject Slot. If coin cannot come out
after press Reject Button, please take apart the mechanism to take out the jammed coin.

Note: please cut off the power before taking out the coin Mechanism.

Adjustment: Loosen screw # 5, move rod #6 up and down per coin dimension. Adjust the fixed
sheet at the back of mechanism by screw #7 to avoid coin jamming

13
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

6-5 TRUNK

MAIN FRAME
SERVICE DOOR

MAIN
BOARD

 SERVICE DOOR KEY GUA711, open the service door to service the computer host,
circuit board etc

 HOST COMPUTER

1 2 3 4 5 6
1 POWER INLET
2 DVI
3 VGA
4 NETWORK CONNECTION
5 USB(4PCS)
6 AUDIO CONNECTION

14
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

7. SERVICE
Please remove fiberglass car body completely off when servicing the base. When removing the
body to access the base you should follow the instructions below.
1. Turn off power, unscrew screws around skirt and remove the skirt
2. Open back door, disconnect ALL connectors at both sides . See instruction below

Disconnect the connector


at left side to separate
fiberglass and electrical
parts

Disconnect connector
at right side to
separate motor and
power

15
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

3. Unscrew and remove the 2 screws on fixed board, and slide (pull) out fixed board and the
all electrical parts on it. See the circle on picture

Move out

4. Look through the empty back door, you can see the long screw which fastens the fiberglass
car and base. Take out this long screw. See the circle on picture

5. Unscrew 4 screws on aluminum plate.

Allen key

16
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

6. With two persons assisting, raise up the fiberglass car and remove it from base. (2
operators are necessary to raise up fiberglass car)

7. Service the base assembly mechanism and motor after removing the fiberglass car body.

NOTE:
 When fix fiberglass car is placed back on the base, you should carefully align the 4 screw
holes on fiberglass step plate and the 4 screw holes on the base.
 Please use caution in connecting the connectors in the proper place.

17
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

8. CONTROL SIGNAL AND INSTRUCTION


8-1 PCB LAYOUT

P1,P2,P3,P4 are for signal input port,P9,P10,P11 are signal output port, J1 is
for USB ,P12 is for power。

8-2 HOW TO ENTER INTO MENUS


Open the coin door and you will see the Setting/Meter Panel at the top of coin box;

 To enter the Menu state on screen- Press: “MENU” inside the door on this Setting/Meter
panel, then you will see the screen as below. Continue to press “MENU” until you
highlight the word: “ENTER”. To enter the Menu state, then press “OPTION”. In the event
you accidentally change the password, please enter the default password (default
password is 0000).

18
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

Figure 1
 After enter password, press “MENU”, move to ENTER, then press; “OPTION” to enter into
next page(see figure 2 )

Pressing “Menu” again and again advances through all of the various Menus available.
Pressing “OPTION”, when in any given Menu, will highlight the Option desired and step through
the options of that Menu.

When all of the Menu options are chosen- or at any time- the Operator simply can press the
“JUMP” button and return to normal game play.

PRESS THE “JUMP” BUTTON ON THE CONTROL PANEL AT ANY TIME TO


EXIT THE MENU EXCEPT IN THE TEST MENU!

EXIT THE MENU AND RETURN TO NORMAL GAME PLAY FROM ANY MENU
SCREEN EXCEPT “TEST” BY PRESSING THE “JUMP” BUTTON.

19
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

Figure 2
 If desired, please set the desired password or leave at the default, 0-0-0-0.

Figure 3
20
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

CREDITS PER PLAY REQUIRED 1——8


AVERAGE GAME TIME 30 Sec——120 Sec
TICKET OPTION ON/OFF
TICKET MECHANISM ENABLE/ DISABLE
MERCY TICKET OPTION 0——8
TICKET TYPE 1PT/ 2PT
BONUS TIME OPTION ON/OFF
BONUS TIME 5 Sec——30 Sec
BONUS TIME WON AT COINS COLLECTED 5——40
TURBO OPTION ON/OFF
TURBO ITEMS PER GAME 1——5
TURBO TIME 5 Sec——30 Sec
ATTRACT MODE ON/OFF
ATTRACT AUDIO OFF/ 20——120
AUDIO LEVEL 1——10

Figure 4

EXIT THE MENU AND RETURN TO NORMAL GAME PLAY FROM ANY MENU
SCREEN EXCEPT “TEST” BY PRESSING THE “JUMP” BUTTON.

21
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

Figure 5

EXIT THE MENU AND RETURN TO NORMAL GAME PLAY FROM ANY MENU
SCREEN EXCEPT “TEST” BY PRESSING THE “JUMP” BUTTON.

22
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

9. INSTRUCTION OF GAME PLAY


9-1 GOAL ICONS

GOAL IMAGE FUNCTION

ADD SCORE, 1 POINT (TOWARDS


GOLD COIN TICKET REWARDS IF TICKET FUNCTION
IS ENABLED)

OIL CAN TURBO SPEED REWARD

9-2 HOW TO PLAY


Insert the proper Credits and the game will begin at various points throughout the course;

Play Time Score

Goal Example Player’s Vehicle

Bonus Time
Speed

Step on the gas pedal to speed up the car. Control steering wheel to collect more coins and
Turbo gas can, and to avoid obstacles.

23
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

Press “JUMP” button to collect the higher coin or to avoid all obstacles throughout the game.
When the Time runs out, the game will end.

Tickets will be dispensed according to the total score after the game has ended. (Ticket version
when enabled)

24
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

10. GENERAL TROUBLESHOOTING


Symptom Possible Problem Solution
POWER POWER
Sound Problems Low Volume Check Volume Control and adjust as
-No sound necessary
-Low Sound Faulty speaker harnessing Check connections and/or repair
-Intermittent harnessing
Sound Faulty speaker Check and/or replace speaker
Faulty sound board or sound board Check connections or Replace Sound
harnessing Board
Faulty Main P.C. Board Check and/or repair or replace Main P.C.
Board

Game does not take Coin switch out of adjustment Re-form coin switch wire
or credit money Coin mech dirty or improperly adjusted Clean and adjust mech as necessary
correctly Faulty Coin switch Check and/or replace switch
Faulty coin switch harness or connector Check and/or repair harnessing
Game improperly programmed Check programming options and adjust
Faulty Main P.C. Board or component Repair and/or replace Main P.C. board

Ticket Dispenser No tickets in the game Refill ticket dispenser


not working Tickets jammed in dispenser Clear ticket jam
properly, or no Ticket dispenser sensor blocked with Clean off sensor
tickets being debris
dispensed Poor connection on the ticket dispenser Check and/or replace connectors
Game improperly programmed Check ticket programming options
Faulty ticket dispenser Replace dispenser
Faulty ticket dispenser harnessing Check and/or repair harnessing
Faulty Main P.C. Board Replace or repair Main P.C. Board
LED Light fail Poor contact of terminal Correct the connection
LED light is burned out. Replace the broken LED light with new
No voltage output form power box one.
Replace with new power box

Game will not Game power off Check on/off switch and power cord
start. Electrical Power Switch Open Close Electrical Power Switch
Main fuse blown Check and/or replace fuse as necessary
Power Supply problem or failure Check Power Supply output and
connections
Faulty P.C. board or component Repair and/or replace main P.C. board

Game stops or is The power connector is disconnected. Reconnect the connector securely.
stopped with Possible faulty connection or short circuit. Check all circuitry for faulty connections
nothing displayed or short circuits.
in video monitor

25
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

11. PART LIST


11-1 BASE MECH ASSY

PART CODE
REMA
NO. FOR BASE DESCRIPTION QTY SPECIFICATION
EK
FRAME
1 COB-M-01 BOTTOM FRAME 1 Q235

2 COB-M-02 MAIN MOTION FRAME 1 Q235

3 COB-M-03 UP MOTION FRAME 1 Q235

4 COB-M-04 PLATE FOR MOTOR 1 Q235

AXIS OF ROTATION
5 COB-M-05 1 ASSY
FIXING ASSY

6 COB-M-06 MOTOR 1

7 COB-M-07 MOTOR CHAIN WHEEL 1 45#

8 COB-M-08 HINGE PIN 1 Q235

26
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

9 COB-M-09 SLEEVE 2 Q235

10 COB-M-10 PULL ROD 1 Q235

11 COB-M-11 PLAIN BEARING 2 INSIDE TEETH M20

12 COB-M-12 PLAIN BEARING 1 INSIDE TEETH M16

13 COB-M-13 PLAIN BEARING 1 OUTSIDE TEETH M16

14 COB-M-14 CHAIN(5 CHAIN) 1 23 KNOB

15 COB-M-15 CASTER 2 2.5’’

16 COB-M-15 CASTER 2 2.5’’

17 COB-M-16 ADJUSTER 4

18 COB-M-17 MOUNTED BEARING 4 UCP204

19 COB-M-18 MOUNTED BEARING 2 UCP205

A1 COB-M-19 OUT HEXAGON 16 M6X20

A2 COB-M-20 OUT HEXAGON 8 M10X45

A3 COB-M-21 OUT HEXAGON 4 M10X35

A4 COB-M-22 OUT HEXAGON 4 M10X40

A5 COB-M-23 OUT HECAGON 4 M8X25

A6 COB-M-24 IN HEXAGON 2 M8X50(WHOLE)

A7 COB-M-25 NUT 2 212

A8 COB-M-26 NUT 2 M16

27
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

11-2 HARDWARE COMPONENT

1
5

2
8

4
7

28
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

SPECIFICATION/
NO DESCRIPTION QTY IMAGES
MATERIAL

1 HOST COMPUTER 1

2 POWER SUPPLY 1 OUTPUT12V/12.5A

POWER AMPLIFIER
3 1 GC-2.2
BOARD

4 MAIN BOARD 1 Ver2.2 20100130-6A

5 RELAY 1 LJQX-38F/40A

6 RELAY BASE 1 LJQX-38F-11A

7 FIXED PLATE 1 BLACK WOOD

8 “U” disc 1

29
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

11-3 MACHINE PARTS LIST

NO. PART CODE DESCRIPTION LOCATION IMAGES QTY UNIT

MAIN GAME HARD


1 KCC-US-001 TRUNK 1 PC
DRIVE PC

MAIN CONTROL I/O PCB


2 KCC-US-002 TRUNK 1 PC
Ver2.2 20100130-6A

MAIN POWER SUPPLY


3 KCC-US-003 TRUNK 1 PC
OUTPUT12V/12.5A

POWER AMPLIFIER PCB


4 KCC-US-004 TRUNK 1 PC
GC-2.2

RELAY AND BASE


5 KCC-US-005 TRUNK 1 PC
SETLJQX-38F/40A

6 KCC-US-006 AUDIO CABLE Q-562A TRUNK 1 PC

7 KCC-US-007 LINK CABLE USB Q-515 TRUNK 1 PC

VGA MONITOR CABLE


8 KCC-US-008 TRUNK 1 PC
FROM PC Q-550

INSIDE COIN
9 KCC-US-009 METER 6 DIGIT 2 PC
MECH DOOR

MENU/OPTION/TICKET
INSIDE COIN
10 KCC-US-010 CLEAR PUSHBUTTON 3 PC
MECH DOOR
RED

LCD MONITOR
11 KCC-US-011 INSIDE 1 PC
17inch,16:9/220V

12 KCC-US-012 SPEAKER 8Ω/15W INSIDE 2 PC

SPEAKER GRILL COVER


13 KCC-US-013 INSIDE 2 PC
BLACK

COIN MECH
14 KCC-US-014 COIN MECH 1 PC
DOOR

15 KCC-US-015 FILTER 10A TRUNK 1 PC

30
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

POWER SIWTCH
16 KCC-US-016 TRUNK 1 PC
250V/10A

“JUMP” PUSHBUTTON
CONTROL
17 KCC-US-017 AND GRAPHICS AND 1 PC
PANEL
LAMP SET

18 KCC-US-018 GAS PEDAL ASSEMBLY FLOOR INSIDE 1 PC

PROTECTION SKIRT
19 KCC-US-019 BOTTOM 2 PC
PVC BLACK

FRONT LAMP COVER


20 KCC-US-020 FRONT 2 PC
LA8020B(CHROMING)

21 KCC-US-021 FRONT LAMP LED PCB FRONT 2 PC

FRONT LAMP SET SQ-17


22 KCC-US-022 FRONT 2 PC
YELLOW

BACK LAMP SET SQ-17


24 KCC-US-024 REAR 4 PC
RED

BOOSTER AND FUEL


CONTROL
25 KCC-US-025 ON DASH BOARD LED 2 PC
PANEL
PCB

SPEED METER ON
CONTROL
26 KCC-US-026 DASH BOARD 2 PC
PANEL
LED PCB

CONTROL
27 KCC-US-027 LED PCB 5 PC
PANEL

BACKUP MIRROR
28 KCC-US-028 TRUNK 2 PC
KT-421

CHROMING WHEEL
29 KCC-US-029 TIRE POSITION 4 PC
COVER ø364

ACRYLIC DASHBOARD CONTROL


30 KCC-US-030 1 PC
(WITH GRAPHIC) PANEL

MONITOR GLASS WITH


MONITOR
31 KCC-US-031 GRAPHICS ;TEMPERING 1 PC
POSITION
GLASS

BACK BUMPER
32 KCC-US-032 REAR 1 PC
BAR;STAINLESS STEEL

31
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

ROLL BAR; STAINLESS


33 KCC-US-033 TOP SEAT 1 PC
STEEL

FRONT BUMPER BAR;


34 KCC-US-034 FRONT 1 PC
STAINLESS STEEL

TICKET/DBV OPTION LEFT OF


35 KCC-US-035 1 PC
FRAME SET/DBV 门 MONITOR

COIN BOX AND COIN RIGHT OF


36 KCC-US-036 1 PC
MECH FRAME SET MONITOR

FLOOR PLATE;
37 KCC-US-037 FLOOR AREA 1 PC
DECORATION PATTERN

THRESHOLD STEP
38 KCC-US-038 ENTEANCE/EXIT 2 PC
COVER RIGHT AND LEFT

GAS CAP;MIRROR
39 KCC-US-039 SURFACE STAINLESS TURNK 1 PC
STEEL

MOTION LINKAGE
40 KCC-US-040 FRAME BEARING BASE FRAME 4 PC
UCP204
MOTION LINKAGE
41 KCC-US-041 FRAME BEARING BASE FRAME 2 PC
UCP205
MOTION LINKAGE JOINT
42 KCC-US-042 BEARING M16(IN BASE FRAME 1 PC
TEETH)

MOTION LINKAGE JOINT


43 KCC-US-043 BEARING M16(OUT BASE FRAME 1 PC
TEETH)

MOTION LINKAGE JOINT


44 KCC-US-044 BEARING M20(IN BASE FRAME 2 PC
TEETH)

45 KCC-US-045 CYCLE CHAIN (23 KNOB) BASE FRAME 1 PC

UNIVERSAL CASTER
46 KCC-US-046 BASE FRAME 2 PC
(2.5'')

DIRECTIONAL
47 KCC-US-047 BASE FRAME 2 PC
CASTER(2.5'')

48 KCC-US-048 ADJUSTER(M16) BASE FRAME 4 PC

32
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

49 KCC-US-049 MOTION DRIVE MOTOR BASE FRAME 1 PC

50 KCC-US-050 MOTOR CHAIN WHEEL BASE FRAME 1 PC

51 KCC-US-051 DRIVEN CHAIN WHEEL BASE FRAME 1 PC

52 KCC-US-052 MOTION BEARING BASE FRAME 1 PC

53 KCC-US-053 ECCENTRIC BLOCK A BASE FRAME 1 PC

54 KCC-US-054 ECCENTRIC BLOCK B BASE FRAME 1 PC

55 KCC-US-055 GU0711 TRUNK 3 PC

DEEO GROOVE BALL


56 KCC-US-056 TRUNK 2 PC
BEARING 6202

57 KCC-US-057 FLANGE BEARING 6901Z TRUNK 1 PC

58 KCC-US-058 CLIP ø15 TRUNK 1 PC

DIRECTION PRESSURE
59 KCC-US-059 TRUNK 1 PC
SPRING

60 KCC-US-060 BACK-MOVING BEARING TRUNK 1 PC

61 KCC-US-061 DIRECTION SWITCH TRUNK 2 PC

62 KCC-US-062 POWER CABLE TRUNK 1 PC

63 KCC-US-063 TICKET MECH (OPTION) TRUNK 1 PC

64 KCC-US-064 DBV (OPTION) TRUNK 1 PC

33
SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM

65 KCC-US-065 COBRA HOOD EMBLEM GRAPHICS 1 PC

LICENSE PLATE
66 KCC-US-066 GRAPHICS 1 PC
GRAPHIC

67 KCC-US-067 NAMEPLATE GRAPHICS GRAPHICS 2 PC

68 KCC-US-068 COOLING FAN WARNING LABEL 1 PC

ELECTRIC SHOCK
69 KCC-US-069 LABEL 1 PC
WARNING

70 KCC-US-070 GAS PENAL LABEL LABEL 1 PC

MOVING PART
71 KCC-US-071 LABEL 1 PC
WARNING

72 KCC-US-072 POWER SWITCH LABEL LABEL 1 PC

73 KCC-US-073 SEI\RIAL NO. LABEL 1 PC

STING INTERNATIONAL, P.O. BOX 455, ELK GROVE VILLAGE, IL 60007 USA E-mail: sting2 @ rcn.com.

FOR ALL PARTS, SERVICE, AND TECHNICAL SUPPORT


PHONE: 708-598-3720 FAX: 708-598-3720 WWW.FAMILYFUNCOMPANIES.COM

STING INTERNATIONAL, © 2013 ALL RIGHTS RESERVED

34

You might also like