TS(X) SERIES

Hydraulic Guillotine Shears

 Hydraulics and rake angle Cutting angle/blade gap
TSX 3006
adjustment

All HACO shears are recognised for being well-built, accurate

and cost effective, meeting the demand for the high precision
sheet metal and heavy fabrication market to run small or high-
TS/TSX shears are bottom driven by 2 pull-down
volume production.
cylinders. The hydraulic system consists of a motor
pump unit and multi-function manifold block,
All our TS shears are equipped with power rake angle
conveniently located at the rear of the machine.
adjustment from the SP9 control panel and quick blade gap
adjustment. Both 6 and 12 mm models are available with our
This compact assembly brings valves and hoses
SC200 control (TSX types). These machines are delivered with
together, thus simplifying the system and eliminating
an extensive range of standard features.
troublesome leaks. The connections to the cylinders, the
hold downs and pumps are by means of flexible hoses.
The TS/TSX series shears remain the pacesetters in the price/
Two high pressure relief valves protect the hold downs
quality ratio market of today. With thousands of units running
and the cutting cycle from overload. Oversized oil tank
day after day all over the world, we are convinced of the
for trouble-free production shearing.
durability and craftmanship of these machines.

Adjustable rake angle Auto blade gap (TSX)

Electro-hydraulic adjustment of the rake angle Automatic blade gap adjustment in function of
by the control panel - SP9 with push buttons and the material thickness by means of 2 hydraulic
digital readout or SC200 touch screen - allows cylinders.
thin material to be cut at less angle, minimising
distortion of the cut material.
HACO - Hydraulic guillotine shears - TS(x) series

HACO - Hydraulic guillotine shears - TS(x) series

Hydraulic hold downs Manual blade gap (TS)

The hydraulic hold downs work independently, Our quick blade gap adjustment is located
which makes it possible to clamp plates of different conveniently in front of the machine.
lengths and thicknesses correctly. The hold downs
operate independently from the shearing pressure. Adjustment ranges from 0,05 mm blade gap for
thin sheet thicknesses and progressively increases
On the left and the right hand side of the machine for heavier thicknesses up to the maximum shear
the hold downs are arranged more closely to allow capacity.
cutting small plates without any problems.

2 3
 Standard features Backgauge
Standard features of the TS(X)
TSX 3012 The backgauge consists of 2 rigid arms (containing
• Hydraulic motor-pump group arranged at the rear of the machine.
• 2 under driven cylinders. Electro-hydraulic adjustment of the rake angle. guides and control spindle) and the parallel
• All operator controls located within the immediate reach of the operator. adjustable backgauge bar. This assembly assures a
• The TS comes standard with the SP9 control and offers the precise positioning of the sheet.
following functions:
Automatic positioning of the backgauge to the preselected
position, stroke control, counter Motorized positioning with the SP9 pre-selection
and selection for backgauge retraction control or programmable positioning with the
• Quick blade gap setting SC200 control. Digital readout of the actual and pre-
• Tilting sheet hold downs, pressure of which is independant selected or programmed position.
from the shearing pressure, in order to clamp each sheet
thickness properly
• Hydraulic and electric overload protection.
• 4 edged cutting blades
• Motorized backgauge 1000 mm on all models
• Shearing table with a number of square iron blocks, for
easy sheet feed-in and increasing operator´s safety drastically.
• Squaring arm of 1000 mm, with scale, T-slot and
disappearing stop
• Movable foot pedal control
• Instruction and maintenance manuals
• Non-filled oil tank (due to environmental regulations)
• Service tools

TS comes standard with the SP9 control

TSX comes standard with the SC200 control

Motorized backgauge (MOT)

SC200 Control Lateral movement front to back.

Standard on all models.
Powered backgauge, stroke 1000 mm.

Basic Features Programming Modes Quick and easy

Optional Rear Safety
• Simplified icon based programming with • Automatic The SC200 fits all requirements for sheet
clear display architecture By entering the sheet thickness, cutting operations that require the highest
• Personalised access codes with different the control automatically sets the accuracy and minimum time-loss. Creating
access rights blade gap and the cutting angle as a program requires only a few actions.
• Pre-equipped for remote support a function of the sheet thickness. All The program parameters include:
• Ethercat bus communication parameters can be manually modified backgauge position, cutting time, sheet
• Integrated safety according to the actual data. thickness, blade angle & blade gap setting.
HACO - Hydraulic guillotine shears - TS(x) series

HACO - Hydraulic guillotine shears - TS(x) series

• Based on new reliable German hardware The blade gap adjustment is done electro-
• Manual hydraulically.
All cutting parameters such as material
Optional Features type, sheet thickness, cutting angle and No specific training is required to work with
blade gap can be programmed this control!
• Integrated optical finger protection control manually.
• Integrated oil temperature control

4 5
 Optional equipment Technical specifications

Optionals
• SC200 control unit (TSX type) • Blades for cutting stainless steel

Stroke of backgauge MOT version [mm]

• •

Capacity mild steel (400N/mm2) [mm]

Width (without CE safety fences) [mm]

Pendant control panel (only with SC200 controller) Hand safety guard with hand gaps and safety light curtain guards
• •

Width (with CE safety fences) [mm]

Squaring arms and front support arms Hold downs with soft feet inserts and pressure regulation
• Full table with ball transfers • Safety fences and light beams at the rear of the machine
• Protractor for angle shearing (necessary for countries requiring the CE safety specifications)

Number of plate hold dwons

Length squaring arm [mm]

at min. angle - max. angle

Approximate weight [kg]

Number of strokes/min

Working height [mm]

Cutting length [mm]

Motor Power [kW]

Cutting angle [°]

Length [mm]

Height [mm]
2006 6 2050 0,5-3 13 10-15 1000 1000 770 7.5 2825 1905 2715 1660 3500

3006 6 3050 0,5-3 18 10-15 1000 1000 770 7.5 3840 1905 2715 1700 4500

3008 8 3050 0,5-3 18 6-17 1000 1000 830 15 4055 1905 2715 1830 5200

3012 12 3050 0.5-3 18 7-14 1000 1000 930 22.5 4180 2030 2800 2210 8500

Hand safety guard with hand gaps for handling small Protractor for angle shearing. E D A B C
sheets.

Ball transfers mounted in the iron table blocks, for Squaring arms and front support arms with or
easy feed-in of the sheets. without scale, T-slots and tilting stop. Lengths from
HACO - Hydraulic guillotine shears - TS(x) series

HACO - Hydraulic guillotine shears - TS(x) series

1000 up to 3000mm.

6 7

HACO reserves the right to change any specifications without prior notice.
 P

ADVANCED TECHNOLOGIES, SINCE 1965

Bending Robotics Cutting Shearing

With decades of experience and leading technologies, we are known for our
high-quality customized solutions for sheet metal fabrication and machining.
Whether laser cutting, bending or shearing, at HACO we offer precision, quality and
innovation.

Customized solutions Made in EU Global reach Local focus

Find out how we can take your shearing projects to the next level and view our
extensive portfolio of success stories. ​

Machinery Masterminds
WWW.HACO.COM

HACO Offices:

HACO Belgium HACO France HACO Slovakia

Hogeschuurstraat 2 Parc d’activé de la Houssoye Ulica 1. Mája 1850
8850 Ardooie Rue René Laënnec 031 80 Liptovský Mikuláš
Belgium 59930 La Chapelle D’Armentieres Slovakia
+32 (0)51 26 52 00 France
[email protected] +33 3 20 10 30 40
[email protected]

HACO USA HACO Australia HACO India

11629 N. Houston Rosslyn Rd. 16 Argong Chase Plot No. 122A, Sector 6
Houston, TX 77086 Cockburn Central WA 6164 MT, Bawal, Distt. Rewari Haryana,
USA Australia India, 123501
+1 281 445-3985 +61 0 8 9414 7382 +919996246805
[email protected] [email protected] [email protected]

This catalog is not a contractual document and only for

illustrative purposes. HACO reserves the right to modify any
specifications within this catalog without prior notice.
TSX / 01.2025