LC Series
LC4P
LED Display Light Everywhere
Product features：
320X160mm universal size
Bottom case texture design
High-quality lamp beads
Lamp beads do not fall off easily.
New design of PCB board is more reliable
Lightweight installation
Module as a unit for assembling, reduced screen weight, reduce the
structural load of the building.
Excellent visual experience
Good Compatibility
Replace the indoor P1.2~P4 module with the same series.
Support for coating process*
Support 7680Hz refresh*
Note: Drawings are for reference only.
Address: 6 Lanjing North Road, Pingshan District, Shenzhen 518118 China Website：www.lampro.net
TEL：+86 - 755 – 27653939 E-mail : [email protected] Update time：2024/05/31 V2.0
WIRING DIAGRAM OF DATA AND POWER：
Remark:
1. The recommended diagrams are for reference only.
2.The recommended cabinet size is 640X480 mm.
Address: 6 Lanjing North Road, Pingshan District, Shenzhen 518118 China Website：www.lampro.net
TEL：+86 - 755 – 27653939 E-mail : [email protected] Update time：2024/05/31 V2.0
SPECIFICATION PARAMETERS：
Parameter Value
Pixel Pitch 4mm
LED Type SMD2121
Module Resolution（W×H） 80×40=3200 Pixels
Module
Pixel density（pixels/sq.m.） 62500 dot/㎡
Module Size (WxHXD) W320mmxH160mmxD16.2mm
Module Weight 0.46±0.02kg
HUB HUB75
Single-dot Brightness Calibration Support
Brightness ≥500 cd/㎡
Optical
Color Temperature 2000K～9300K Adjustable
Beam Angle（Hor/Ver°） 140°/140°
Brightness/Color Uniformity ≥98%
Contrast Ratio 5000:1
Input Power <Max> 488 W/㎡
Electroni
Input Power <Typical> 163 W/㎡
c
Power Supply Input Voltage AC90～132V/ AC186～264V, Frequency 47-63（Hz）
Frame Changing Frequency 60Hz
Performance
3840Hz（Standard）
Refresh Rate
7680Hz（Optional）
Processing Depth 12~14Bit
Video Support 2K HD, 4K UHD
Environm
Life Span（hrs） 100000hrs
ent
Working Temp/Humidity（℃/RH） -20℃~45℃ / 10%~50%RH (No Condensation)
Storage Temp/Humidity（℃/RH） -20℃~50℃ / 10%~60%RH (No Condensation)
Certification BIS/CE/CB/ROHS/EAC
Note:
1.Product pictures are for illustration only, the actual product effects (including but not limited to appearance, color, size) may be slightly
different, please refer to the actual product.
2.The specification parameters are reference values. Part of the data comes from Unilumin’s internal laboratory and is obtained under a
specific test environment. In actual use, it may be slightly different due to product batch differences, configuration differences, software
versions, use conditions and environmental factors. Actual usage shall prevail.
3. Different configurations can achieve different refresh rates.
Address: 6 Lanjing North Road, Pingshan District, Shenzhen 518118 China Website：www.lampro.net
TEL：+86 - 755 – 27653939 E-mail : [email protected] Update time：2024/05/31 V2.0
ENVIRONMENTAL PRECAUTIONS：
① Temperature range：Working temperature control at -20-45℃;
Storage temperature control at -20-50℃;
② Humidity range：Working humidity control at 10%-50%RH;
Storage humidity control at 10%-60%RH;
③ Waterproof：Protection class IP30 for indoor products (lamp face)，water can easily cause a short circuit,
resulting in damage to the circuit board and components.Therefore, indoor products need to be kept away from
water sources and must not be cleaned to avoid liquid leakage into the screen;
④ Dustproof：Protection class IP30 for indoor products (lamp face)，the display is exposed to a dusty
environment, which can easily cause circuit short circuits, resulting in damage to the circuit board and components;
⑤ Anti-electromagnetic radiation: The display should not be placed in the electromagnetic radiation
interference in the environment, easy to cause the screen display abnormalities, affecting the display effect;
⑥ Anti-static: Power supply, cabinet, screen metal shell need to be well grounded, ground resistance＜10Ω, avoid
static damage to electronics;
⑦ Protect against corrosive gases: Corrosive gases contain salt or acid gases in the air, which can cause corrosion
of electronic components, crystallization leakage and other phenomena;
⑧ Anti-rodent and pest control: Rodents and insects chew on the wire, which can cause damage to the wire,
rodent and insect excreta have a certain degree of corrosiveness to electronic devices, excessive corrosion is prone
to cause damage to electronic components.
Address: 6 Lanjing North Road, Pingshan District, Shenzhen 518118 China Website：www.lampro.net
TEL：+86 - 755 – 27653939 E-mail : [email protected] Update time：2024/05/31 V2.0
PRECAUTIONS FOR USE AND OPERATION:
① Electrostatic protection：Installers need to wear electrostatic rings and electrostatic gloves,
and each tool in the assembly needs to be strictly grounded;
② Connect the lines: The module has positive and negative silkscreen markings, cannot be reversed, and is strictly
prohibited from connecting to 220V AC power;
③ Method of operation：It is strictly prohibited to assemble modules, cabinets, and complete screens under
energized conditions. it needs to be operated under complete power failure to protect personal safety; It is
forbidden for personnel to touch the display when it is lit, so as to avoid the static electricity generated by human
body friction to break through the LED and components;
④ Disassembly and transportation: The modules shall not be dropped, pushed, squeezed or crushed, prevent
the module from falling and bumping, so as to avoid rupture of the kit, damage to the lamp beads and other
problems; Especially indoor/outdoor small-pitch products should not be violently disassembled and handled;
⑤ Environment check: The display site needs to be configured with a temperature and humidity meter to monitor
the environment around the screen, in order to find out in time whether the display has moisture, water vapor and
other problems; The mounting position should not be close and directly in front of air conditioning vents and
heaters and other appliances that have a significant effect on temperature;
⑥ Environment of use: It is strictly prohibited to install the indoor module magnet in an outdoor or sub outdoor
environment; Non-customized outdoor conventional products are prohibited from being installed near seashores
and high salt, acid, and alkaline sites;
⑦ Playback control: Please do not display only static screen or static text for a long period of time, which will cause
serious attenuation of lamp brightness or lead to batch dead lamp problem, scrolling screen or text need to be
played;
Address: 6 Lanjing North Road, Pingshan District, Shenzhen 518118 China Website：www.lampro.net
TEL：+86 - 755 – 27653939 E-mail : [email protected] Update time：2024/05/31 V2.0
⑧ Reserve craft seams: When installing outdoor products, the process seam between module and module &
between box and box should be reserved to avoid various display problems caused by thermal expansion and
contraction of products;
⑨ Avoid construction on the installed LED display screen：LED display installation is strictly prohibited after
re-construction to prevent the LED display by the impact of high current and dust, such as: welding, chainsaw and
other equipment operation;
⑩ Use of the display:
A、The ambient humidity in the range of 10%-65% RH, it is recommended that the screen should be opened once a
day, each normal use of more than 4 hours to remove moisture from the display;
B、When the ambient humidity is above 65%RH, it is necessary to dehumidify the environment and it is
recommended to use it normally for more than 8 hours a day and close the doors and windows to prevent the display
from being damp and causing defects;
C、When the display is not in use for a long time, the display needs to be preheated and dehumidified before use to
avoid moisture caused by bad lamps, the specific way: 20% of the brightness is lit for 2 hours, 40% of the brightness is
lit for 2 hours, 60% of the brightness is lit for 2 hours, 80% of the brightness is lit for 2 hours, and 100 brightness is lit
for 2 hours, and so the brightness of the gradual increase in aging.
Address: 6 Lanjing North Road, Pingshan District, Shenzhen 518118 China Website：www.lampro.net
TEL：+86 - 755 – 27653939 E-mail : [email protected] Update time：2024/05/31 V2.0
PRODUCT PACKAGING DESCRIPTION:
① Package content: 1 pack of 40
② Package size: L655*W365*H395mm
③ Packaging appearance: Refer to the following figure
DISPLAY ACCEPTANCE REQUIREMENTS AND METHODS:
① Screen Brightness: Set the display to full brightness and complete the display brightness measurement with the
light gun within 10 minutes. When measuring the brightness, the light gun is required to be perpendicular to the
screen. Adjust the distance between the light gun and the display to ensure that the black position of the
observation window covers more than 16 pixel points, adjust the focus so that the LED beads can be clearly seen in
the eyepiece, and then measure and read the brightness data;
② Viewing angle: Measurement of people standing in the screen body around 160 °, screen body under the
perspective of 80 ° position observation, the screen body is required to have no obvious black spots, no obvious
dark block problem;
③ Grounding: The switching power supply shell, box, screen structure is correctly grounded, and the grounding
point is correctly grounded to the label marking;
④ Lightning treatment: The building is required to have lightning rods or lightning belt facilities and effective
grounding, the power distribution box is required to have a surge protector.
Address: 6 Lanjing North Road, Pingshan District, Shenzhen 518118 China Website：www.lampro.net
TEL：+86 - 755 – 27653939 E-mail : [email protected] Update time：2024/05/31 V2.0
