https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by sales@ChinaStandards.
net
ICS 53.060
J 83
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
中华人民共和国国家标准
GB/T 5143-2008/ISO 6055: 2004
Supersedes GB/T 5143-2001
Industrial Trucks – Overhead Guards –
Specification and Testing
(ISO 6055: 2004, IDT)
工业车辆 护顶架 技术要求和试验方法
Issued on: February 03, 2008 Implemented on: July 1, 2008
Jointly Issued by the Standardization Administration of the People's Republic
of China and the General Administration of Quality
Supervision, Inspection and Quarantine of the People's
Republic of China
https://www.chinastandards.net/standard/GBT5143-2008.html
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by sales@ChinaStandards.net
Contents
Foreword .................................................................................................................................... I
1 Scope ................................................................................................................................... 1
2 Normative References ......................................................................................................... 1
3 Requirements for High Lift Rider Trucks with Lift Height Exceeding 1800mm ................ 2
4 Requirements for Variable Reach Trucks with Operator Position not Protected by the
Boom ......................................................................................................................................... 9
Bibliography .............................................................................................................................11
https://www.chinastandards.net/standard/GBT5143-2008.html
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by sales@ChinaStandards.net
NATIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
中华人民共和国国家标准
GB/T 5143-2008/ISO 6055: 2004
Industrial Turcks – Overhead Guards –
Specification and Testing
工业车辆 护顶架 技术要求和试验方法
1 Scope
This standard specifies the technical requirements and testing methods of overhead guards,
operators' legs and feet protection, roll-over protection structure (ROPS) and falling-object
protection structure (FOPS) for any type of high lift, rider operated, powered industrial truck
with a lift height exceeding 1800mm.
2 Normative References
The following normative documents contain provisions which, through reference in this
text, constitute provisions of this standard. For dated references, subsequent amendments to
(excluding corrections to), or revisions of, any of these publications do not apply. However,
all parties coming to an agreement according to this standard are encouraged to study whether
the latest edition of the normative document is applicable. For undated references, the latest
edition of the normative document applies.
GB/T 8591 Earth-moving Machinery - Seat Index Point (GB/T 8591-2000, eqv ISO
5353: 1995)
GB 10827 Powered Industrial Trucks - Safety Code (GB 10827-1999, eqv ISO 3691:
1980)
GB/T 17771 Earth-moving Machinery - Falling-object Protective Structures - Laboratory
Tests and Performance Requirements (GB/T 17771-1999, eqv ISO 3449:
1992)
GB/T 17772 Earth-moving Machinery - Laboratory Evaluations of Protective Structures -
Specifications for Deflection-limiting Volume (GB/T 17772-1999, idt ISO
3164: 1995)
GB/T 17922 Earth-moving Machinery - Roll-over Protective Structures - Laboratory
Tests and Performance Requirements (GB/T 17922-1999, idt ISO 3471:
1994)
ISO 13564-1 Powered Industrial Trucks - Test Methods for Verification Visibility - Part 1:
Sit-on and Stand-on Operator Trucks and Variable Reach Trucks
https://www.chinastandards.net/standard/GBT5143-2008.html
