PHASE | VISLINK:

Wireless Camera Systems

 L1700 Camera Transmitter…………………….p. 2-3
 INCAM G Grass Valley Camera Transmitter....p. 4-5
 INCAM S Sony Camera Transmitter................p. 6-7
 CLIP ON 4 Camera Transmitter.......................p. 8-9
 Camera Control System……………………p. 10-11
 OCP 5 Camera Control System…………….p. 12-13
 FOCAL POINT Camera Control System…..p. 14-15
 UltraLite 4K UHD Wireless Cam Encoder...p. 16-17
 UltraDecoder HEVC Decoder……………..p. 18-19
 Barrel Booster……………………………….p. 20-21
 L3025 DownConverter……………………….p. 22-23
L1700
Camera Transmitter
The L1700 range of wireless transmitters represent
the next generation of flexible wireless systems from
Link. Now even more powerful this new range is the
most compact and versatile available. With multiple
inputs and mounting options this unit can be mounted
to full broadcast camera for sports broadcasters
or ENG camera for news or even a prosumer
camera to broaden the market reach further. With
user interchangeable RF modules and a range of
software options the Link L1700 continues the line of
innovative, high performance RF transmitters.

Key Features Typical Applications

■■ H.264 Very Low Latency Encoder ■■ Event Coverage
■■ HD-SDI / 3G HD-SDI / HDMI / Composite ■■ Newsgathering
input ■■ Sports Coverage
■■ Wi-Fi Control
■■ Docks with L1750 range of TX modules
■■ Integrated Camera Control (requires L1750
for UHF reception)
SPECIFICATIONS

TRANSMITTER UHF RECEIVER ENCODER

■■L1750-1927 1.95GHz to 2.7GHz ■■410MHz to 490MHz frequency ■■20ms to 1340ms latency
frequency range range depending on operational mode
■■L1750-3239 3.2GHz to 3.9GHz ■■H.264 4:2:2 8-Bit to 1080i 60
■■L1750-6471 6.425GHz to high 4:2:2 level 4.1 (L1730)
7.125GHz L1730 No longer available,
■■L1750-6875 6.8GHz to 7.5GHz replaced by L1731
■■DVB-T at bandwidths of 6 / 7 ■■H.264 4:2:0 8-Bit to 1080p 60
/ 8 MHz (L1731)
■■LMS-T proprietary modulation ■■1920, 1440 & 960 horizontal
for enhanced mobile operation resolutions at 1080i
■■LMS-T bandwidths of 3, 4, 5, ■■1280, 960 & 640 horizontal
6, 7, 8, 10, 12, 14, 16, 20 or resolutions at 720p
24MHz with 2 carrier density ■■2 stereo audio pairs MP1L1 and
options MP1L2
■■Optional Link Digital Pre-
Distortion for enhanced
adjacent channel performance

FRAME RATES (FPS) VIDEO INPUTS AUDIO INPUTS DATA INPUTS

L1730 No longer available ■■SDI / HD-SDI (L1730) / 3G SDI ■■Embedded audio over SDI ■■RS232 input relayed to receiver
■■1080i 25/29.97/30 (L1731) (BNC) / HD-SDI (L1730) / 3G SDI e.g. for external GPS unit
■■720p 50/59.94/60 ■■HDMI (Type-D) (L1731)
■■Composite (Lemo) ■■1 analogue audio stereo pair HEADSET (3.5MM JACK)
■■1080p 23.98/24
(Lemo) ■■Headset microphone audio
L1731 selectable as audio source
■■Mic / Line level support with
■■1080i 25/29.97/30 ■■Primary audio channel
phantom power
■■720p 50/59.94/60 monitoring ‡
■■Headset audio input
■■1080p 50/59.94/60

ASI (LEMO) NETWORK (WI-FI) USER INTERFACE POWER

■■Input (for service multiplexing) ■■2.4GHz ■■OLED display for enhanced ■■Power supply via Lemo e.g. to
■■Output ■■Mobile phone / tablet friendly visibility connect to D-Tap power source
■■Input and Output on web pages ■■Extended operation voltage
multifunction pins DOCKING MODULE INTERFACE range 10V to 32.2V
CAMERA CONTROL (LEMO) ■■Docks with L1750 transmitter /
NETWORK (RJ45) ■■Support for various UHF receiver POWER CONSUMPTION
■■100Mbit/s Ethernet professional broadcast cameras ■■Nominally 15W in standard
■■Output Transport Stream over ■■Used in conjunction with an configuration (with L1750-1927)
UDP or RTP L1750 module
■■Integrated webserver for ■■Dual channel wet tally 12V
control output

PHYSICAL ENVIROMENTAL
Dimension ■■Operating Temperature: –10º C
■■135 (L) x 40 (H) x 83 (W) to +50 C ‡
mm (inc. Removable heatsink
mounts, exc. RF
■■connectors)
Weight
■■550g (including removable
heatsink, excluding antennas) ‡

NOTES
■■‡ Availability subject to confirmation.
■■Some features specified are available via optional licenses
■■Not all encoder interface options are concurrently available
■■We reserve the right to change specifications at any time without
prior notice

www.vislink.com • [email protected]
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the
07/15 ENG trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to
RD000529 Rev 2 change specifications without notice. Please contact your representative to confirm current specifications.
INCAM-G
Grass Valley Camera Transmitter
Built into the Grass Valley LDX series HD camera,
the Vislink INCAM-G Integral Wireless Camera
Transmitter provides full HD broadcast quality
encoding at 1080p, 1080i, and 720p plus built in
wireless camera control.

Key Features Typical Applications

■■ Built in Wireless Camera Control ■■ Event Coverage

■■ Ultra Low Delay down to 20ms H.264 ■■ Newsgathering
■■ Data rates up to 39Mbit/s ■■ Sports Coverage
■■ Add on PA Barrel Booster option
■■ Video and tally outputs for Steadycam
■■ Full configuration available by Windows™
PC software
 SPECIFICATIONS

Frequency Bands Modulation Modes GOP & PIDs Environmental

■■ 1.95 to 2.7GHz, ■■ QPSK, 16QAM, 64QAM ■■ GOP Selectable 4 to 30 ■■ -20° to +50°C
■■ 3.3 to 3.7GHz ■■ FEC: 1/2, 2/3, 3/4, 5/6, 7/8 ■■ PIDs user configurable ■■ Altitude: 4500m, Humidity: 95%
(consult factory for other bands) ■■ Guard interval: 1/32, 1/16, 1/8, 1/4 Video Input long term
Tuning Range Bandwidth ■■ HD SDI 1080i, 1080p, 720p as Camera Control data receiver
■■ 400MHz standard bandwidth or 1.95 ■■ DVB-T / ISDB-T 6, 7, 8MHz defined by the camera ■■ Operating bands - UHF and VHF
to 2.7GHz factory option switchable Audio Inputs ■■ Tuning step size - 12.5kHz or
Frequency Selection ■■ LMS-T scalable 3 to 20MHz (factory ■■ Two audios, includes external audio 6.25kHz
■■ Up to 16 pre-set channels or tuning option) input with phantom powering ■■ Modulation - GMSK
in 1MHz steps (500kHz steps Data Rate ■■ Audio encoding rate selectable 128, ■■ Data rate - 300 to 19200 bps
available to special order) 256, 384kBit/s
■■ DVB-T / ISDB-T 4.98 to 31.7Mbit/s ■■ Tally - included
Transmit Power ■■ LMS-T up to 39Mbit/s, bandwidth User Data input (camera control
■■ Adjustable 10 to 250mW (or add dependant (factory option) return data)
Barrel Booster option). ■■ Selectable 1,200 to 230,400 baud
Encoding
* subject to frequency band
■■ H.264/MPEG-4, level 4.1 video. Monitoring and Control
Transmit Antenna ■■ Comprehensive transmitter setup
■■ Profile 4.2.0 / 4.2.2 selectable
■■ Omni Directional 4dBi gain via Windows™ PC software
(nominal) ■■ Audio MPEG-1 layer 2 / layer 1
selectable Power Supply
Modulation ■■ 12 - 16V DC, 18 Watts, includes
Latency
■■ COFDM DVB-T 2K or switchable external DC input
LMS-T (factory option) or ■■ Selectable down to less than 1
switchable ISDB-T (factory option), frame, 20ms
2K, 4K, 8K with Time Interleaving
selectable 100ms, 220ms, 440ms

www.vislink.com n [email protected]
08/14 - Rev 1 © 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective
RD001673 companies or organisations. Note:Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.
INCAM-S
Sony Camera Transmitter
Built into the Sony HDC-2400, 2500, 2550 series
HD camera, the Vislink INCAM-S Integral Wireless
Camera Transmitter provides full HD broadcast
quality encoding at 1080p, 1080i, and 720p plus built in
wireless camera control.

Key Features Typical Applications

■■ Built in Wireless Camera Control ■■ Event Coverage

■■ Ultra Low Delay down to 20ms H.264 ■■ Newsgathering
■■ Data rates up to 39Mbit/s ■■ Sports Coverage
■■ Add on PA Barrel Booster option
■■ Full control via the camera viewfinder
 SPECIFICATIONS

Frequency Bands Modulation Encoding User Data input

■■ 1.95 to 2.7GHz, ■■ COFDM DVB-T 2K or switchable ■■ H.264/MPEG-4, level 4.1 video. (camera control return data)
■■ 3.3 to 3.7GHz LMS-T (factory option) or switchable ■■ Profile 4.2.0 / 4.2.2 selectable ■■ Selectable 1,200 to 230,400 baud
ISDB-T (factory option), 2K, 4K, 8K
(consult factory for other bands) with Time Interleaving selectable ■■ Audio MPEG-1 layer 2 / layer 1 Monitoring and Control
Tuning Range 100ms, 220ms, 440 ms selectable ■■ Comprehensive transmitter setup
■■ 400MHz standard bandwidth Latency via camera viewfinder.
Modulation Modes
■■ 1.95 to 2.7GHz factory option ■■ QPSK, 16QAM, 64QAM ■■ Selectable down to less than 1 Power Supply
frame, 20ms ■■ 12 - 16V DC, 18 Watts
Frequency Selection ■■ FEC: 1/2, 2/3, 3/4, 5/6, 7/8
GOP & PIDs Weight
■■ Up to 16 pre-set channels or tuning ■■ Guard interval: 1/32, 1/16, 1/8, 1/4
in 1MHz steps via side mounted ■■ GOP Selectable 4 to 30 ■■ Additional camera weight, 470g
Bandwidth
panel control (500kHz steps ■■ PIDs user configurable Environmental
available tospecial order) ■■ DVB-T / ISDB-T 6, 7, 8MHz
switchable Video Input ■■ -20° to +50°C
Transmit Power ■■ HD SDI 1080i, 1080p, 720p as
■■ LMS-T scalable 3 to 20MHz (factory ■■ Altitude: 4500m, Humidity: 95%
■■ Adjustable 10 to 250mW (or add defined by the camera long term
option)
Barrel Booster option). Audio Input
*subject to frequency band Data Rate
■■ Audio encoding rate selectable 128,
■■ DVB-T / ISDB-T 4.98 to 31.7Mbit/s
Transmit Antenna 256, 384kBit/s
■■ Gigawave Omni Directional 4dBi ■■ LMS-T up to 39Mbit/s, bandwidth
gain (nominal) dependant (factory option)

www.vislink.com n [email protected]
08/14 - Rev 1 © 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective
RD001674 companies or organisations. Note:Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.
Clip-On 4
Camera Transmitter
Designed for use with both HD and SD cameras for
electronic newsgathering, television outside broadcasts
and studio applications, with latency down to one frame
(33ms), and using the latest H.264 or MPEG-2 encoding,
the Clip-On 4 offers exceptional picture quality and
capability. No other wireless camera system can match
the outstanding RF performance of the Clip-On 4.
Full remote control of broadcast cameras is available
when used in conjunction with the Gigawave Camera
Control system.

Key Features Typical Applications

■■ Interchangeable RF Modules ■■ Event Coverage

■■ Built in Wireless Camera Control (option) ■■ Newsgathering
■■ Ultra Low Delay down to 20ms H.264 ■■ Sports Coverage
■■ Future proof for 1080p software upgrade
■■ Add on PA Barrel Booster option
■■ Encryption BISS 1 and E, or AES256 (option)
 SPECIFICATIONS

Frequency Band Modulation Modes GOP & PIDs ASI input

■■ 1.3 - 7.5GHz (consult factory for ■■ QPSK, 16QAM, 64QAM ■■ GOP Selectable 1 to 30 ■■ ASI input, selectable through front
other bands) ■■ FEC: 1/2, 2/3, 3/4, 5/6, 7/8 ■■ PIDs user configurable panel menu
Tuning Range (modulation dependant) Video Input ■■ Built in ASI MUX
■■ 400MHz standard bandwidth ■■ Guard interval: 1/32, 1/16, 1/8, 1/4 ■■ SDI HD SMPTE-292M (299M) 1080i ■■ ASI output
■■ 1.95 to 2.7GHz factory option Bandwidth / 720p, (1080p future) User Data input (camera control
Frequency Selection ■■ DVB-T 6, 7, 8MHz switchable ■■ SDI SD SMPTE-259M (272M) 576i return data)
■■ Up to 16 pre-set channels or tuning ■■ LMS-T scalable 3 to 24MHz (factory / 480i ■■ Selectable 1200 to 230,400 baud
in 1MHz steps via option) ■■ Analogue: CVBS (PAL/NTSC) or Encryption
■■ side mounted panel control (500kHz Data Rate component YUV, Y/C ■■ BISS modes 1 and E, or AES256
steps available to special order) ■■ DVB-T 4.98 to 31.7Mbit/s HDMI (factory options)
Transmit Power ■■ LMS-T up to 43Mbit/s, bandwidth ■■ Test signal: Colour bars Remote control
■■ Adjustable 10 to 200mW, (or add dependant (factory option) Audio Input ■■ Ethernet port, web browser
Barrel Booster option). Encoding ■■ 4 channels, Analogue mic/line interface.
Transmit Antenna ■■ H.264/MPEG-4, level 4.1 video, or switchable Power Supply
■■ Gigawave Omni Directional 4dBi MPEG-2 ■■ SDI embedded, AES digital, HDMI ■■ 10 - 35V DC
gain (nom.) ■■ Profile 4.2.0 / 4.2.2 selectable ■■ Audio encoding rate selectable 128, Size & Weight
Modulation ■■ Audio MPEG-1 layer 2 / layer 1 256, 384kBit/s ■■ 178 x 106 x 91mm (including
■■ COFDM DVB-T 2K selectable ■■ Test signal: Audio tones connector), 0.95kg
■■ ISDB-T 2K with Time Interleaving Latency Environmental
selectable 100ms, 220ms, 440 ms ■■ Selectable down to sub 1 frame, ■■ -20° to +50°C
(factory option) 20ms ■■ Altitude: 4500m, Humidity: 95%
■■ LMS-T (factory option) long term

www.vislink.com n [email protected]
09/14 - Rev 1 © 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective
RD001679 companies or organisations. Note:Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.
 Camera Control System

P U B L VISLINK
Features
• Fully functional manufacturers

I C S ANews
control for broad range of Sony,
Thomson, Ikegami, Panasonic
and Hitachi cameras and panels.
• 410-490MHz frequency range
with 250Hz selection resolution.
• L1520 camera control receive
module integrated into L1500

F E Yand Entertainment
camera back transmitter. No
need for additional protocol
conversion boxes or cabling.
• Full functionality of the
Manufacturers control panel
including real-time feedback of
Wireless Camera parameters from the camera to
the OCP.
Control System
• Data cables supplied for specific
Overview camera types.
The VISLINK Wireless Camera System based on the L1500, with the L1255 • Red and green tally for
Wireless Camera Control Unit (CCU) and the L1520 Camera Control module supporting cameras.
is the most versatile wireless camera system on the market. • Tally outputs on camera back for
additional tally lights
Full camera control using manufacturers Operator Control Panels (OCP) is
• Supports Link Generic camera
the only way to ensure the pictures from wireless cameras match those of
control system.
their wired counterparts. The Link Camera Control System provides vision
engineers with the facility to use the same control panels for wired and • Support for remote location of
UHF transmitter
wireless cameras. The system makes every feature available on the panel
to achieve the desired pictures and meet the most demanding broadcast
requirements.

The L1255 Wireless CCU interfaces the control panel and is a transmitter
for sending the control data to the L1520 module within the L1500 Camera
Back. This communication operates using UHF and a robust modulation
scheme. Closed loop control is achieved with return data being sent on the
video transport stream back to the CCU.

The L1255 Wireless CCU Interface is a half width rack unit which can be
mounted next to the Lynx L1274 or the Link L2134, only occupying 1RU.
The L1520 slots into the L1500, occupying no additional space and can be
easily be fitted in the field.

Link have been providing fully featured camera control using manufacturers
panels since 2007 and have worked closely with end users and camera
manufacturers to develop it into the product it is today.
Specifications
L1520 Camera Control Receiver L1255 Wireless CCU Interface
RF Characteristics Physical RF Characteristics Physical
• L1520-4145 410-450MHz (Fits within L1500) Frequency range Chassis
• L1520-4549 450-490MHz
Weight: • 410-490MHz • 1RU height, half rack width,
Frequency step size • 0.2kg (0.45lb) Output Power Dimensions
• 250Hz
Power • 0.1-2W • 210mm [8.3”] x 350mm [13.8”]
Sensitivity • 6W Occupied Bandwidth Weight:
• –117dBm Supplied by L1500 • 20KHz • 2.5kg (5.5lb)
[typical 50kHz channel spacing]
Environmental Step size Power
Modulation • 250Hz • 100 – 240Vac; 20W
• GMSK Temperature (operating) (max at 2W Tx power)
• 0° to +50°C [32° to122°F] Modulation
Data Rate • GMSK
• 9.6K Baud Humidity (non-condensing) Environmental
• 95% Data Rate
Adjacent channel rejection Temperature (Operating)
• 9.6K Baud
• 50dB • 0° to +50°C [32° to122°F ]
[typical 50KHz offset] Compliance
• EN 300 220-1 V2.1.1 Inputs & Outputs Humidity (Non-Condensing)
• 95%
Inputs & Outputs UHF Output
• BNC Jack, 50Ω
UHF Input Compliance
• SMA Jack, 50Ω Control panel connection • ETSI EN 300 113-1 V1.6.
• 9way D-type (data and power) • FCC Parts 15 & 90
Camera Control Data
• 5pin Lemo, Tally 1 & 2
• XLR 3 pin Female
Tally
• 6 pin Lemo, Remote
• Serial RS-232 Control, 6 pin Lemo,
Auxiliary
(For 2nd L1255 to act as a remote
transmitter)
• 5 pin Lemo
Rx Input
• 6 pin Lemo

Supported Cameras
Ikegami – SD Sony – SD Thomson – SD
• HL45 • BVP30 • LDK100
• HC400W • BVP70 • LDK200
• HL55 • 550 • LDK300
• HL60 • 570 • LDK500
• HL57 • BVP90
L1500
LINK
• HL59 • E10/E30 Thomson – HD Transmitter
• HL65W • 950 • LDK-3000 L1255 Wireless
• HK355P • PDW-700 • LDK-6000 CCU Interface
• HK355 • DXC-D30 • LDK-7500
• HK366P • DXC-D35 • LDK-8000
• HK366 • DXC-D50 • LDK-8000Elite L1520
• HK377P • DXC-D55 L3025 Camera Control
• HK388P • DNW-9WS Downconverters Receiver
• HK388 • DSR-450
Panasonic – HD
• AJ-HPX900 Operator
• HLV55 • DVW-970P Control
• AJ-HPX2700 LYNX
• HL-DV5 Panel
• AJ-HPX2100E Diversity
• HK399 Sony – HD (OCP)
• AJ-HPX3700G Receiver
• HDC-1400 Output
Ikegami – HD • HDC-1450R
Hitachi – HD
• HDK79EXIII • HDC-1500
• SK-HD1000
• HDK79EC • HDC-1500R
• HDS-V10 • HDC-1550 Example Camera Control System Diagram
• HDW-650P
• PDW-700
• PDW-750
• PDW-EX3
• HXC-100
• HSC-300
• HDC-P1

Note: For other cameras please consult VISLINK.

www.vislink.com

© 2011 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations.
Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 2 / 2 / 2011
OCP-5
Camera Control System
The Wireless Camera Control System provides
comprehensive control functions and includes three
main units - the Operator’s Control Panel (OCP), UHF
Data Transmitter and the Data Receiver mounted on the
camera. As an option, an additional auxiliary interface unit
allows up to 8 OCPs to be connected to a single Data
Transmitter, allowing multiple cameras to be controlled
using a single narrow-band frequency. Return Data may be
provided by the User Data feature on Gigawave Clip-On
transmitters and receivers.

Key Features Typical Applications

■■ Compact ■■ Event Coverage
■■ Intuitive menu driven LCD display ■■ Newsgathering
■■ Sports Coverage
SPECIFICATIONS

CAMERA CONTROLS (CAMERA MODEL DEPENDENT)

■■RGB – White balance ■■• Auto/manual iris control ■■• Bars
■■• RGB – Black balance ■■• Configurable open/close iris ■■• Configurable Panel lockout
■■• RGB – Flare control ■■limits ■■• Gain steps
■■• RGB – Gamma control ■■• Detail ■■• White balance presets and
■■• ND and CC filter control ■■• Detail dependency ■■fixed temperatures
■■• Master Black Pedestal ■■• Saturation
■■• Iris control ■■• Auto-Knee

COMPATIBLE CAMERA TYPES

Sony Ikegami Hitachi
■■DXC-D30 ■■HL-55 ■■Z-3k
■■DXC-D35 ■■HL-59 ■■SK900
■■DXC-D50 ■■HL355 ■■SK1000-H
■■DXC-D55 ■■HK-388
■■BVP-550 ■■HK-399
JVC
■■BVP-570 ■■HC-400
■■KY-D29
■■BVP-950
■■BVP-E10
■■BVP-E30 Thomson
Panasonic
■■HDC-1500 ■■TTV1657D
■■AJ-HPX2000
■■HDC-1550 ■■LDK100
■■HDC-1400 ■■LDK200
■■HDC-1450 ■■LDK300
■■HSC-100 ■■LDK400
■■HXC-300 ■■LDK500
■■PDW-700 ■■LDK4000
■■PDW-F800 ■■LDK6000
■■PMW-EX3 ■■LDK8000
■■LDK8000 Elite

DATA TRANSMITTER
Frequency bands Occupied bandwidth Data rate Power
■■UHF (VHF option) ■■12.5 / 20 / 25kHz (other ■■4800 to 19200 Baud ■■110 to 260 VAC
Tuning range bandwidths selectable) ■■TX output power
■■450 to 470MHz (optional wider Modulation ■■2 or 5 Watt versions
bandwidth to special order) ■■GMSK Size and weight
Frequency selection ■■1U rack mount, 460mm deep,
■■6.25kHz step size 2.75kg

DATA RECEIVER
RF specifications Camera selection and RF channel Size and weight Power
■■Compatible with the ■■Software control or Internal ■■Alternative receiver versions ■■+12VDC from camera battery
transmitter selector switches (model according the camera model
dependant)

OEM OCP CONTROL

The Gigawave Camera Control System may also be used with OEM OCPs. Currently supported types are Sony RCP-750, RCP-1500 and Grass Valley
OCP-400 (for other types of OEM OCP please contact Gigawave).

www.vislink.com • [email protected]
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the
12/14 ENG trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to
RD001709 Rev 1 change specifications without notice. Please contact your representative to confirm current specifications.
 FocalPoint
Wireless Camera Control System
The FocalPoint is Vislink's latest wireless camera control
system providing comprehensive control functions for
today’s broadcast needs. The system can control multiple
camera and operator control panel combinations, with
future-proof Ethernet control. Designed to work with the
majority of camera manufacturers the control system can
support one-way or return communication. The innovative,
weatherproof outdoor unit provides operational flexibility
with the freedom to move beyond the studio or truck. The
unit also supports copper or fibre optic connectivity.

Key Features Typical Applications

■■ Allows control of up to six cameras by multiplexing six ■■ Event Coverage
control panels over single RF link. ■■ Newsgathering
■■ Supports one-way or return data communication to ■■ Sports Coverage
camera
■■ Three CRIU units can be linked together to allow
control of 18 cameras using one RF head
■■ 2.2” Colour LCD display with intuitive menu for easy
configuration
■■ Front panel LED shows data activity / system health
diagnostic information
■■ Compact UHF telemetry transmitter unit with copper
and fibre connectivity
■■ Unit configurable via the front panel or by a web
browser
SPECIFICATIONS

TRANSMITTER PARAMETERS
Frequency Band Tuning Range Bandwidth Modulation
■■UHF (VHF OPTION) ■■440 MHz – 476 MHz (Other ■■12.5 kHz / 20.0 kHz / 25.0 kHz ■■GMSK
bands available on request)

MECHANICAL PARAMETERS
Dimensions Weight
■■Rack ■■Headunit ■■Rack ■■Headunit
■■483mm (W) x 303mm (H) x ■■130mm (W) x 82mm (H) x ■■2.45kg ■■1.54kg
44mm (D) (19” x 1U) 210mm (D)

PRIME POWER PARAMETERS

Power Supply Power Output
■■100V – 240V AC ■■Configurable in 0.1 W steps
■■50/60 hZ

COMPATIBLE CAMERA TYPES

■■Sony ■■Hitachi
■■RCP1500/153 ■■RU1500

Other manufacturers to be added with firmware

upgrade

www.vislink.com • [email protected]
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the
02/15 ENG trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to
RD00#### Rev 1 change specifications without notice. Please contact your representative to confirm current specifications.
 Video Parameters

UltraLite
4K UHD wireless camera encoder module
The UltraLite utilises state of the art HEVC
encoding to make 4K UHD wireless live video a
reality today. Being the world’s first, the UltraLite
isAudio
a lightweight
Encoder ‘module’ that can beAudio
attached
Inputsto
any existing wireless camera system
 ISO 14496-3 2006 (HE-AAC) 8
enabling live
 Embedded
transmission
pairs of Ultra High Definition video.
Being so lightweight, the UltraLite is attachable to a
Outputs
variety of 4K UHD camera such as the Sony F55.
Vislink will provide a custom made mounting
 ASI for your camera type.
solution

Along with Vislink’s UltraDecoder, the UltraLite

Environment
provides & Physical
a complete end to end live 4K UHD,
easy to implement, cost effective wireless video
solution.

Key Features Typical Applications

 Capable of allowing 4K UHD live wireless  Live wireless 4K UHD transmission
video using existing RF infrastructure  Sports Coverage
 Compact and Lightweight  Event Coverage
 Utilises latest HEVC advanced encoding
techniques
 UltraLite system comprises of a UltraLite
module and UltraDecoder to allow an end
to end 4K UHD solution
Video Parameters
Video Encoder Profiles Video Inputs Video Formats
 4K UHD  2 SFP+ module slots supporting  4K UHD
 Main 10 - 8/10bits 4.2.0 electrical and optical interfaces  2160p / 23.98 / 24 / 25 / 29.97 / 30 /
 Main 4.2.2 10 – 8/10 bits 4.2.0 / carrying: 50 / 59.94 / 60
4.2.2  4 x 3G-HDSDI (UHD)
 1.0 - 25Mbps

Audio Parameters
Audio Encoder Audio Inputs
 ISO 14496-3 2006 (HE-AAC) 8  Embedded
pairs

Outputs
 ASI

Latency
 System Latency – Approx. 900ms – 1Sec
Note: Suitable for applications such as Camera back, Airborne and On-boards

Environment & Physical

Dimensions Temperature Power
 111.5mm width  Operational: 0°C to +50°C (32°F  10 - 36V DC
 33mm height to 122°F)  Less than 25 Watts
 191mm deep  Storage: –20°C to +70°C (–4°F to
158°F)

Weight
 570g

All dimensions in mm

16-Apr-16 Rev 1.0 learn more at vislink.com

UltraDecoder
HEVC Decoder
Being the lightest in the world, the Vislink UltraDecoder is
the new 1RU, ½ rack HEVC & 4K UHD capable decoder.
The Product uses the latest advanced HEVC decoding
techniques to offer up to 50% bit rate reduction compared
to H.264, resulting in the delivery of high quality video at
low bit rates. Along with Vislink's UltraCoder this product
provides a complete end to end HEVC & 4K UHD encode
and decode solution.

Key Features Typical Applications

■■ Capable of decoding 4K UHD, HD & SD video ■■ SNG
■■ The product uses the latest advanced HEVC ■■ ENG
decoding techniques to offer 50% bit rate ■■ IP Networks
reduction compared to H.264
■■ The ability to decode one 4K UHD or 1 HD video
channel
■■ The UltraDecoder can be used with the
UltraCoder to provide a complete end to end
encode and decode solution
SPECIFICATIONS

VIDEO PARAMETERS
Video Decoder Profiles Video Formats
■■4K UHD ■■480i / 29.97
■■Main 10 - 8/10bits 4.2.0 ,1.0- ■■576i / 25
50Mbps ■■720p / 50/ 59.94 / 60
■■HD ■■1080i / 50/ 59.94 / 60
■■Main 10 - 8/10bits 4.2.0 1.0 ■■1080p / 23.98 / 24 / 25 / 29.97
- 50Mbps / 30 / 50 / 59.94 / 60
■■SD ■■2160p / 23.98 / 24 / 25 / 29.97 /
■■4.2.0 Main 0.5 - 6Mbps 30 / 50 / 59.94 / 60

IP INTERFACES

VIDEO
Type: Protocol
■■10 / 100 / 1000 Base–T ■■IEEE802.3 Ethernet
Ethernet ■■Encapsulation for ASI – RTP
(RFC2250), ARP, IPv4,
IGMPv2/3, TCP/UDP
■■MultiCast

AUDIO PARAMETERS
Audio Decoder Audio Outputs
■■ISO 14496-3 2006 (HE-AAC) ■■Embedded 4 pairs in SDI
■■Embedded 4 pairs in HDMI

FLEXIBILITY
Remote Control Outputs
■■Ethernet ■■HDMI 1.4 (UHD)
■■HTTP ■■Mini BNC (SD & HD) X 2
■■SNMP ■■RJ45 (IP)
■■BNC (ASI)

ENVIRONMENT & PHYSICAL

Dimensions Temperature Power
■■210mm wide by 350mm deep ■■Operational: 0°C to ■■<100VA
(8.27” wide by 13.78” deep) +50°C(32°F to 122°F) ■■90 to 264 Vac
■■1RU, ½ rack ■■Storage: –20°C to +70°C ■■50/60 Hz
Weight (–4°F to 158°F)
■■1.9kg approx (4 lbs)

www.vislink.com • [email protected]
© 2015 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the
RD001918 Rev 4 trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to
22/01/16 ENG change specifications without notice. Please contact your representative to confirm current specifications.
 L3211
Barrel Booster

P U B L VISLINK
Features
• Boosts RF transmitter power for
extended range.

I C S ANews
• Provides optimal trade-off
between transmit power, DC
power consumption and spectral
efficiency.
• Small, light-weight & robust
Barrel Booster construction.
• Designed to mate directly to

F E Yand Entertainment
Overview the Link range of camera back
The L3211 Barrel Booster has been specifically tailored for transmitters.
wireless camera back applications. Designed to fit directly • Incorporates LDPD (Link Digital
onto the RF output from the Link range of transmitters, this Pre-Distortion) for improved
unit is small, lightweight and easy to use. This amplifier
adjacent channel rejection.
includes ALC (Automatic Level Control) in order to provide
a constant RF output power for all transmitter power level • Includes input and output
settings. The L3211 has a wide DC operating range (9-28V) RF harmonic filters to ensure
and can be powered via the RF input connector* or using the regulatory compliance.
Lemo power cables supplied with the unit. These power cables
allow the option to connect to the Lemo power socket on the • ALC (Automatic Level Control)
wireless transmitter or to the D-Tap adaptor from an IDX or maintains a constant RF output for
Anton Bauer battery plate. all transmitter settings.
• Can also be operated as a fixed
gain power amplifier for user
Incorporating LDPD (Link Digital Pre-Distortion) for improved defined RF output powers.
adjacent channel rejection, integral harmonic filtering and a
• RF output fully protected against
power save mode this amplifier is a must have addition to any
wireless camera system where extended range is required. mis-match damage.
• Powered via RF input connector or
external Lemo connector.
* Switchable phantom power to the L3211 barrel booster is • Power save mode when RF muted.
provide in the L1530-1927 RF module.
• Wide DC (9-28V) operating range.
• Tri-colour LED indicates unit status
and RF output mode setting.
Specifications
Electrical Environmental
At 20±5°C ambient Operating Temperature
(Portable Equipment)
Parameter Conditions Min Typ Max Units Comment • -10°C to +50°C
Storage Temperature
Frequency Range L3211-2027 2000 – 2700 MHz • -20°C to +80°C
L3211-6475 6400 - 7500 MHz Does not include LDPD Humidity
• 95%
RF Output Power ALC Mode +28 (0.63) 28.75(0.75) +30 (1.0) dBm (W) • Non-Condensing
IP Rating
RF Input Power Range ALC Mode +10 (10) – +24 (250) dBm (mW)
• 54
Gain Fixed Gain Mode 10 – 15 dB
Mechanical
Spectral Regrowth Adjacent Channel – – -40 dBc EN 302 064-1 §7.3.4
RF/DC Input Connector
Alternate Channe – – -46 • 50Ω N Type (M)
RF Output Connector
Spurious 25MHz – 1GHz – – 0.25(-36) nW(dBm) EN 302 064-1 §7.4.6 • 50Ω N Type (F)

1GHz – 27GHz – – 1(-30) Power Connector

• 6-Pin Lemo Socket
Return Loss – 10 – dB
Phantom Power
RF Input CW +27 (0.5) dBm (W) • Applied to RF Input Connector
Damage Level
Pulsed +36 (4) Weight
• 0.32Kg
Static Protection Direct Discharge 8 kV IEC61000-4-2 Length
Air Discharge 15 • 106mm (inc. connectors)
Diameter
Temperature Rise Above Ambient 32 ºC IEC60417-5041
• 62mm
Supply Voltage 9 28 V Status Indicator
Power Consumption RF OFF 7.5 W • Green (DC Power/ALC OK)
• Orange (DC Power OK/Fixed Gain)
RF ON 14 W
Power Connector 6-Pin Lemo Socket
Compliance
L3211 Socket
Standard Class/Category Version • EEG.OB.306 CLV
ETSI EN 302 064-1 Category 1 V1.1.2 Mating Plug
• FGG.0B.306 CLA (straight)
ETSI EN 301 489-28 Class B V1.1.1
• FHG.0B.306 CLA (right-angle)
Optional power cables are available as listed below Pin Out
9003434 Barrel Booster ALC Power Cable (Lemo straight) • 1 & 2: GND, 3 & 4: +VE, 5 & 6: NC

9003435 Barrel Booster ALC Power Cable (IDX D-TAP) Note: When operating the barrel booster
9003437 Barrel Booster ALC Power Cable (Anton Bauer P-TAP)
in the ‘Fixed Gain’ mode the RF output
power is no longer controlled by the
9003438 Barrel Booster ALC Power Cable (Lemo right-angle) barrel booster’s ALC and therefore it is the
operator’s responsibility to ensure that
9007896 Barrel Booster ALC Power Cable (XLR 3pin) the RF drive into the barrel booster is at an
9008305 Barrel Booster Power Cable (Fixed Gain Lemo) appropriate level not to cause over-drive
or damage and to maintain regulatory
9008304 Barrel Booster Power Cable (Fixed Gain IDX D Tap) compliance.
9011941 Barrel Booster Power Cable (75cm un-terminated)

Hot surface, do not touch barrel booster

heat sink surface during operation.

© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are
identified by the trademarks or service marks of their respective companies or organizations.
Note: Vislink reserves the right to change specifications without notice. Please contact your www.vislink.com
representative to confirm current specifications. Document 04 / 02 / 2014
 L3025
DownConverter

Features
• A key component of the Link
Wireless Camera System, but
also suitable for use in third
party systems
• Performance optimized for
use with DVB-T/LMS-T/SCM-Q
COFDM reception
• Very high dynamic range for
weak signal reception with co-
located high-level signals
• Longer cable runs between
down-converter and receiver
are permissible in high gain
mode
• Front-end filter reduces
overloading from UHF
transmissions
• Antenna port protected
against damage from high-
power transmitters and static
discharge
• Small and light-weight to allow
easy pole mounting
• Full protection against water
and dust (IP65) for outdoor
installations
• Tri-colour LED indicates unit
status and gain mode setting

L9972 Mounting Bracket

Specifications
General
Gain Mode Physical (Excluding Bracket)
Antenna Input: . . . . . . . N-Type (F) 50Ω Model Frequency
UHF Output: . . . . . . . . . . . BNC (F) 75Ω Normal High Dimensions Weight
Noise Figure: . . . . . . . . . . . . . . <3dB* L3025 - 1415 1.435 - 1.525 GHz 28 dB. (typ.) 43 dB. (typ.) H - 153 mm [6"] 250g [0.56 lbs]
Phase Noise: –90dBc/Hz @ 10kHz offset W - 65 mm [2.6"]
Spurious: . . . . . . . . . . . . . . <-60 dBm L3025 - 1718 1.785 - 1.805 GHz 30 dB. (typ.) 45 dB. (typ.) D - 25 mm [1"]
O1P3: . . . . . . . . . . . . . . . . . >26 dBm L3025 - 1927E 1.9 - 2.7 GHz 26 dB. (typ.) 41 dB. (typ.)
OP1dB: . . . . . . . . . . . . . . . . >14 dBm
L3025 - 2732 2.7 - 3.2 GHz 26 dB. (typ.) 41 dB. (typ.)
Image/Half-IF Rejection: . . . >60dBc
L3025 - 3239E* 3.2 - 3.9 GHz 30 dB. (typ.) 41 dB. (typ.)
Compliance:
CE (EN302064 EN301489 & ES202239) L3025 - 4450 4.4 - 5.0 GHz 24 dB. (typ.) 39 dB. (typ.)
FCC . Static Discharge (IEC61000-4-2) L3025 - 5459 5.4 - 5.925 GHz 26 dB. (typ.) 41 dB. (typ.)

Environmental:
H - 168 m[6.1"]
Temperature: . . –10° C to +55°C IP65 L3025 - 6471 6.425 - 7.125 GHz 38 dB. (typ.) 53 dB. (typ.) W - 65 mm [2.6"] 300g [0.66 lbs]
[14° F to 122° F] D - 25 mm [1"]
L3025 - 6875 6.8 - 7.5 GHz 38 dB. (typ.) 53 dB. (typ.)
Power supply: . . . . . . . 12.5 to 24V DC
(via UHF output connector)
Power consumption: . . . . . . . up to 5W Other bands are available, contact us with your requirements
(High gain mode)

The L3025 is powered via the output cable.

A tri-colour LED indicates unit status:

• GREEN – Low Gain Setting,
• ORANGE – High Gain Setting,
• RED – Unit Error.

In the low gain mode, the down-converter

provides sufficient gain to compensate for up to
20dB of cable loss between the down-converter
and the receiver.
Typically, with good quality cable, this corresponds
to up to 100m. In the high gain mode this can be
extended to 150m.

*Note: The L3025-3239E noise figure is specified

as <5.5dB above 3.7GHz

Gain Switch

www.vislink.com
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations.
Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. Doc L3025 V16
 EXCLUSIVE REPRESENTATIVE:

PHASE ENGENHARIA
Wireless Camera Systems
 PHASE Engenharia Ind. e Com. Ltda.

Av. Olegário Maciel 231, Lojas 101 a 105

Barra da Tijuca | Rio de Janeiro, RJ | CEP 22 621 200
Tel +55.21.2493.0125

Av. Ibirapuera 2.907, Conj. B306 & 7 - Ed. Conv. Corp. Plaza – Torre C
Indianópolis | São Paulo-SP | CEP 04029-200
Tel +55 11 3589-0125

[email protected] | www.phase.com.br