Maintenance
Schedule
2021 RAV4 XLE AWD
Mileage (km): 114000 Average monthly kilometres: 1333
104000 km - March 2025 112000 km - September 2025 120000 km - March 2026
Factory Recommended Factory Recommended Factory Recommended
Service #1 Service #2 Service #1
Tighten Propeller Shaft Bolts
Inspect Block Heater (if
equipped)
128000 km - September 2026 136000 km - March 2027 144000 km - September 2027
Factory Recommended Factory Recommended Factory Recommended
Service #3 Service #1 Service #2
Tighten Propeller Shaft Bolts Brake Fluid Replacement
Inspect Block Heater (if Replace Transfer Case Fluid
equipped) Tighten Propeller Shaft Bolts
Inspect Block Heater (if
equipped)
152000 km - March 2028 160000 km - September 2028 168000 km - March 2029
Factory Recommended Factory Recommended Factory Recommended
Service #1 Service #3 Service #1
Replace Super Long Life Coolant
Tighten Propeller Shaft Bolts
Inspect Block Heater (if
equipped)
Maintenance
Schedule
176000 km - September 2029 184000 km - March 2030 192000 km - September 2030
Factory Recommended Factory Recommended Factory Recommended
Service #2 Service #1 Service #3
Tighten Propeller Shaft Bolts Replace Spark Plugs
Inspect Block Heater (if Brake Fluid Replacement
equipped) Replace Transfer Case Fluid
Tighten Propeller Shaft Bolts
Inspect Block Heater (if
equipped)
200000 km - March 2031 208000 km - September 2031 216000 km - March 2032
Factory Recommended Factory Recommended Factory Recommended
Service #1 Service #2 Service #1
Inspect Vacuum Pump for Tighten Propeller Shaft Bolts
operation and condition Inspect Block Heater (if
equipped)
224000 km - September 2032
Factory Recommended
Service #3
Tighten Propeller Shaft Bolts
Inspect Block Heater (if
equipped)
Certain driving habits, and some specific climatic and regional operating conditions may necessitate additional Dealer Recommended
Services to protect vehicle components from premature wear and ultimately to increase their longevity..
Additional parts and labour charges may be recommended based on results of vehicle inspection. Prices include all required fluids but
exclude applicable taxes, environmental handling and disposal fees. Pricing subject to change without notice..
Maintenance
Schedule
Service details
Service #1
Check installation of driver's floor mat.
Inspect all lights and horn for proper operation.
1
Inspect wiper blades, linkage and washers for proper operation.
Check and record tire tread depth. Examine tires for damage and uneven wear.
Remove wheels & visually inspect brake pads, calipers, rotors, brake lines and hoses.
Rotate tires (applicable to same size wheels, front & rear).
2
Remove & inspect cabin air filter.
3
Remove & inspect engine air filter.
Inspect for leaks where applicable - engine oil, brake fluid, engine coolant, intercooler coolant, inverter coolant,
power steering fluid, transmission/transaxle fluid, differential fluid, transfer case fluid, and top up windshield
washer fluid.
4
Visually inspect the Hybrid Battery Cooling Intake Filter (if equipped) & clean if required.
Record inspection results, measurements and component condition on inspection form and/or repair order.
Reset Maintenance Reminder Light or system.
Service #2
Check installation of driver's floor mat.
Inspect all lights and horn for proper operation.
1
Inspect wiper blades, linkage and washers for proper operation.
Replace engine oil & filter.
Check and record tire tread depth. Examine tires for damage and uneven wear.
Remove wheels & visually inspect brake pads, calipers, rotors, brake lines and hoses.
Rotate tires (applicable to same size wheels, front & rear).
2
Remove & inspect cabin air filter.
3
Remove & inspect engine air filter.
Inspect exhaust system for leaks, damage or broken hangers.
Check steering gear, linkage and shock absorbers for looseness, damage or leakage.
Inspect ball joints and dust covers, driveshafts, chassis nuts & bolts for looseness or damage.
Maintenance
Schedule
Inspect for leaks where applicable - engine oil, brake fluid, engine coolant, intercooler coolant, inverter coolant,
power steering fluid, transmission/transaxle fluid, differential fluid, transfer case fluid, and top up windshield
washer fluid.
Inspect differential and transfer case vents for obstruction.
Visually inspect drive belts.
Lubricate locks, latches and hinges.
Record inspection results, measurements and component condition on inspection form and/or repair order.
Reset Maintenance Reminder Light or system.
Inspect Block Heater (if equipped)
Inspect Block Heater (if equipped) for operation (continuity check), cord condition, debris in bumper plug, and to
ensure cartridge heater is fully inserted and clipped into the engine block.
Service #3
Check installation of driver's floor mat.
Inspect all lights and horn for proper operation.
1
Inspect wiper blades, linkage and washers for proper operation.
Replace engine oil & filter.
Check and record tire tread depth. Examine tires for damage and uneven wear.
Inspect brake lines and hoses. Remove brake calipers and/or brake drums. Inspect and measure brake rotors
/drums and pads/shoes.
Rotate tires (applicable to same size wheels, front & rear).
2
Remove & inspect cabin air filter.
3
Remove & inspect engine air filter.
Check steering gear, linkage and shock absorbers for looseness, damage or leakage.
Inspect ball joints and dust covers, driveshafts, chassis nuts & bolts for looseness or damage.
Inspect exhaust system for leaks, damage or broken hangers.
Inspect engine oil cooler lines and automatic transmission cooler lines if equipped for leakage, looseness or
damage.
Inspect fuel system for leaks or damage, inspect condition of fuel tank band, fuel tank cap gasket, fuel tank vapour
vent system hoses, fuel lines and connections.
Inspect for leaks where applicable - engine oil, brake fluid, engine coolant, intercooler coolant, inverter coolant,
power steering fluid, transmission/transaxle fluid, differential fluid, transfer case fluid, and top up windshield
washer fluid.
Maintenance
Schedule
Inspect differential and transfer case vents for obstruction.
Visually inspect drive belts adjust tension if required.
Inspect valve clearance (audibly).
Perform a 12 volt battery health check.
Lubricate locks, latches and hinges.
Record inspection results, measurements and component condition on inspection form and/or repair order.
Reset Maintenance Reminder Light or system.
1. Additional parts charges may apply if wipers are found to require replacement during inspection. Additional labour charges
may apply for installation.
2. Additional parts charge may apply if cabin air filter is found to require replacement during inspection. No additional labour
charges will apply for installation.
3. Additional parts charge may apply if engine air filter is found to require replacement during inspection. No additional labour
charges will apply for installation.
4. Additional parts charge may apply if Hybrid Battery Cooling Intake Filter is found to require replacement during inspection.
No additional labour charges will apply for installation.
