Scribd
Upload
140 views19 pages

Waveforms

The document discusses frequency, sampling rate, and aliasing in digitized waveforms. It defines frequency as the rate of repetition of a periodic waveform, measured in cycles per second (Hz). The sampling rate is the frequency at which amplitude values are captured from an analog waveform. According to the Nyquist theorem, the maximum frequency that can be represented without aliasing is half the sampling rate. Frequencies above this risk folding over or "aliasing" to lower frequencies, distorting the original signal. Higher sampling rates allow more accurate digital representation of analog waveforms.

Uploaded by

sujith
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
140 views19 pages

Waveforms

The document discusses frequency, sampling rate, and aliasing in digitized waveforms. It defines frequency as the rate of repetition of a periodic waveform, measured in cycles per second (Hz). The sampling rate is the frequency at which amplitude values are captured from an analog waveform. According to the Nyquist theorem, the maximum frequency that can be represented without aliasing is half the sampling rate. Frequencies above this risk folding over or "aliasing" to lower frequencies, distorting the original signal. Higher sampling rates allow more accurate digital representation of analog waveforms.

Uploaded by

sujith
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 19

Introduction

For periodic waveforms, the duration of the waveform before it repeats is called the period of the waveform

Frequency

the rate at which a regular vibration pattern repeats itself (frequency = 1/period)

Frequency of a Waveform

The unit for frequency is cycles/second, also called Hertz (Hz). The frequency of a waveform is equal to the reciprocal of the period. frequency = 1/period

Frequency of a Waveform

Examples: frequency = 10 Hz period = .1 (1/10) seconds frequency = 100 Hz period = .01 (1/100) seconds frequency = 261.6 Hz (middle C) period = .0038226 (1/ 261.6) seconds

Waveform Sampling

To represent waveforms on digital computers, we need to digitize or sample the waveform.

side effects of digitization:


introduces some noise limits the maximum upper frequency range

Sampling Rate

The sampling rate (SR) is the rate at which amplitude values are digitized from the original waveform.

CD sampling rate (high-quality): SR = 44,100 samples/second medium-quality sampling rate: SR = 22,050 samples/second phone sampling rate (low-quality): SR = 8,192 samples/second

Sampling Rate

Higher sampling rates allow the waveform to be more accurately represented

Nyquist Theorem and Aliasing

Nyquist Theorem: We can digitally represent only frequencies up to half the sampling rate.

Example: CD: SR=44,100 Hz Nyquist Frequency = SR/2 = 22,050 Hz Example: SR=22,050 Hz Nyquist Frequency = SR/2 = 11,025 Hz

Nyquist Theorem and Aliasing

Frequencies above Nyquist frequency "fold over" to sound like lower frequencies.

This foldover is called aliasing.

Aliased frequency f in range [SR/2, SR] becomes f': f' = |f - SR|

Nyquist Theorem and Aliasing


f' = |f - SR|

Example:

SR = 20,000 Hz Nyquist Frequency = 10,000 Hz f = 12,000 Hz --> f' = 8,000 Hz f = 18,000 Hz --> f' = 2,000 Hz f = 20,000 Hz --> f' = 0 Hz

Nyquist Theorem and Aliasing

Graphical Example 1a:


SR = 20,000 Hz Nyquist Frequency = 10,000 Hz f = 2,500 Hz (no aliasing)

Nyquist Theorem and Aliasing

Graphical Example 1b:


SR = 20,000 Hz Nyquist Frequency = 10,000 Hz f = 5,000 Hz (no aliasing)

(left and right figures have same frequency, but have different sampling points)

Nyquist Theorem and Aliasing

Graphical Example 2:

SR = 20,000 Hz Nyquist Frequency = 10,000 Hz f = 10,000 Hz (no aliasing)

Nyquist Theorem and Aliasing

Graphical Example 2:

BUT, if sample points fall on zero-crossings the sound is completely cancelled out

Nyquist Theorem and Aliasing

Graphical Example 3:

SR = 20,000 Hz Nyquist Frequency = 10,000 Hz f = 12,500 Hz, f' = 7,500

Nyquist Theorem and Aliasing

Graphical Example 3:

Fitting the simplest sine wave to the sampled points gives an aliased waveform (dotted line below):

Aliasing Sound Examples

[i:33] sine wave with variable frequency, SR = 22050

Aliasing Sound Examples

Musical examples on the Bach trumpet:


[i:34] SR=22050, highest frequency in music is about 7000 Hz. (no aliasing) [i:35] SR=11025 (some aliasing; adds a little metallic quality) [i:36] SR=4410 (lots of aliasing; sounds like bad video game)

You might also like