Scribd
Upload
265 views20 pages

Chemistry of Photography-2

1) Photography involves creating a latent light-sensitive image on silver halide grains in an emulsion. Light exposure causes a chemical change in the grains, forming a latent image. 2) Developing the image involves a chemical reaction that reduces exposed silver ions to metallic silver, leaving unexposed grains unchanged. This reaction is much faster for exposed grains, allowing an image to be selectively "developed". 3) After development, residual unexposed silver halide grains are removed through a fixing process involving sodium thiosulfate, which dissolves silver halides but leaves metallic silver. This ensures the permanence of the photographic image.

Uploaded by

MInvC
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
265 views20 pages

Chemistry of Photography-2

1) Photography involves creating a latent light-sensitive image on silver halide grains in an emulsion. Light exposure causes a chemical change in the grains, forming a latent image. 2) Developing the image involves a chemical reaction that reduces exposed silver ions to metallic silver, leaving unexposed grains unchanged. This reaction is much faster for exposed grains, allowing an image to be selectively "developed". 3) After development, residual unexposed silver halide grains are removed through a fixing process involving sodium thiosulfate, which dissolves silver halides but leaves metallic silver. This ensures the permanence of the photographic image.

Uploaded by

MInvC
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 20

Chemistry of Photography

1) The light sensitive emulsion


2) The latent image
3) Developing the image
4) Fixing the image
The emulsion
AgNO
3
+ KBr = AgBr + KNO
3
in gelatin
AgBr precipitates (WHY??) and remain in the gelatin to form minute grains.
AgBr is light sensitive, forming a latent image that can be developed
But how?

The sensitivity of the grains are proportional to their sizes. If all the grains
were the same size, there would be no shades of grey at all! Typical
densities of grains are about 5 x 10
8
grains per cm
2
. If you consider a grain
to be equivalent to a pixel, you see that photographic film (taken by itself)
it quite a bit more capable of resolving detail than our current digital
cameras.






The latent image
For many years, it was thought that 2AgBr + light = Ag
2
Br + Br
(the sub-haloid hypothesis). But there was never evidence of a chemical
change. Less than 5 silver atoms are involved at any site!!
X-ray spectroscopy finally showed that silver is liberated
Br
-
+ light Br + e


The electron then migrates to a shallow trap (called a sensitivity site).
Ag
+
+ e
-
Ag

Species produced include: Ag
2
+
, Ag
2
o
, Ag
3
+
, Ag
3
o
, Ag
4
+
, Ag
4
o


Why doesnt it go the other way? i.e. why is it stable?
The Mechanism of Development
The photographic process depends upon the fact that the reaction:
Ag
+
+ e Ag
(i.e. the reduction of silver ion to metallic silver by a developing
solution), proceeds much more easily for an exposed silver halide
grain than for an unexposed grain. The gain can be ~10
9
.
Development- Continued

The reduction potential of the developer must be such that it will develop those
exposed silver halide grains, but not large enough to develop them all. (A
fogging developer)

What actually happens?

C
6
H
4
(OH)
2
+ Na
2
SO
3
+ 2AgBr +NaOH C
6
H
3
(OH)
2
SO
3
Na +2NaBr+H
2
O +2Ag

Hydroquinone sodium sulphite silver bromide sodium hydroxide hydroquinone sulphonate sodium bromide water SILVER!
| |
stabilizer ya gotta do something for the bromine! (plus it adjusts the pH)


Chemical velocity:
T
= 1
o
C v
chem
= 10%.


Hurter and DriffieldD vs. log E
Reflectivity amount of light reflected / amount of light incident = R

Transmissivity 1 R = T
T = (1 amount reflected) / amount incident
= (amount incident amount reflected) / amount incident
= amount transmitted / amount incident

Opacity 1/ T

Density log Opacity = D

Exposure = amount of energy incident on each square centimeter of film

Question: Why do we use logarithms?



Fixing the image

The biggest problem after the invention of photography in the 1830s
was the lack of permanency. You have to get rid of that remaining
bromide, or eventually the photograph will go black. There are no true
solvents of AgBr. When sugar is dissolved in water, and then
evaporated, the sugar is recovered. This never happens with AgBr.
The residue left behind is always a transformed salt. So what we
need to do is make sure the transformed salt is soluble, so it can be
washed away.

AgBr + Na
2
S
2
O
3
= AgNaS
2
O
3
+ NaBr (only slightly soluble)

But if we have a more liberal solution of sodium thiosulphate:

2AgBr + 3 Na
2
S
2
O
3
= Ag
2
Na
4
(S
2
O
3
)
3
+ 2 NaBr (bingo!)

Does anything else work? KCN. We wont go there.

You might also like