By Phillip Holifield and Nick Weil
SRJC, Engr 45, Fall 2009 Semester
Disk brakes
convert kinetic
energy from
the car into
thermal energy
by friction
The brake fluid compresses the piston inside
the brake caliper applying pressure to the
brake pads
Connected to the
axel rotating at
the same speed as
the wheel
Generally made
out of steel
Commonly slotted
or drilled for extra
heat dissipation
Fixed in the brake
caliper
Various compounds
of materials are used
Wear over time and
must be replaced
Increase pad and rotor life
Reduce brake noise
Cooling to prevent heat fade
Maximize braking force
Federal Safety Requirements
Environmental Impact
Passenger Cars:
Low noise and wear
Trucks and SUVs:
Heavier weight requires better braking
High Performance Cars:
Need maximum braking and cooling
Asbestos
Semi-Metallic
Non-Asbestos Organics
Low Steel
Carbon
Exact composition of each manufacturers
pads is a closely guarded secret
Widely used in early disk brake applications
Good for absorbing and dissipating heat
Average stopping power
Asbestos is legally regulate due to its
carcinogenic properties
No longer used due to health risks
Range from 30% to 65% metal and filler
Different pads use Steel, Iron, and Copper
Harder material is very durable and has
excellent heat resistance
Creates more noise and dust
Used in most cars and SUVs
Low to medium coefficient of friction ~ 0.28 0.38
Relatively high mu variation (temperature, duty
cycle)
Good fade characteristics
Poor wear at low temps., <100C
Excellent wear at temps. over 200C
Good wear under heavy loads
Poor wear at high speeds
Generally inferior Noise, Vibration & Harshness
compared to NAOs
Contains no copper
Low initial cost
High fluid temperatures can be an issue
Typically contain nonferrous metals,
inorganic and organic fibers, abrasives,
lubricants and property modifiers such as
glass, rubber, kevlar and carbon
Typically used in high performance cars
Also referred to as ceramics
Low to medium-high coefficient of friction ~
0.33 0.40.
Excellent wear at lower temps. < 200C.
Good for wheel dust.
Relatively poor wear under heavy duty
conditions and at higher friction levels.
Good noise & roughness characteristics
Can have morning effectiveness noise
squealing noise on first couple of brake applies
in the morning
More expensive.
Typically contain ferrous and nonferrous
metals, inorganic and organic fibers,
aggressive abrasives, lots of carbonaceous
and sulfide lubricants
Replacing semi-metallic as the standard for
passenger cars
Higher coefficient of friction levels ~ 0.38
0.50
Good pedal feel and braking confidence
Good fade and high speed performance
High pad/rotor wear
Good for high speed wear
Lots of wheel dust
Inferior noise and life.
Composite materials
reinforced with
carbon fibers
Used for both pads
and rotors
Used in Formula 1
and other race cars
Major manufacturers
include Hitco,
Brembo and Carbon
Industries
Light weight rotors weigh less than 1kg
High coefficient of friction - can decelerate
an F1 car at over 5G
Operating temperature is around 8001000C
Extremely expensive to produce
Text:
http://en.wikipedia.org/wiki/Brake_pads
http://en.wikipedia.org/wiki/Disk_brake
http://auto.howstuffworks.com/auto-parts/brakes/brake-types/disc-bra
ke.htm
www.suscon.org/bpp/pdfs/OEBrakePads.pdf
http://www.performancefriction.com/pages/pad_type.htm
http://www.f1technical.net/articles/2
Images:
http://stmarysjin.org.uk/hsw/gif/disc-brake3.jpg
http://www.akebonobrakes.com/oem/brake_products/images/3d_explo
ded_caliper.gif
https://www.nzad.co.nz/store/images/standard%20brake%20rotor
%20(Small).jpg
http://www.good-win-racing.com/miata/images/items/GWR-078.jpg
