Power Control Parameters List
Name
Default Value
ConstVal
-18dB
PRStep
1dB
POPpm
[2, 2]dB
PschPwr
-3dB
SschPwr
-4dB
PcpichPwr
33.0dBm
ScpichPwr
0dB
BchPwr
-3dB
PchPwr
-3dB
MaxFachPwr
-1dB
PichPwr
-7dB
AichPwr
-7dB
Power Control Parameters - ConstVal
Parameter name
PRACH Initiation Tx Power Constant Value(dB)
Abbreviated name ConstVal
Description
This parameter is the correction value when calculating
the initial transmission power of PRACH preamble.
Range and Step
[-35, -10]dB step 1dB
Unit
dB
Default Value
(note)
-18dB
Power Control Parameters - PRStep
Parameter name
PRACH Preamble Power Ramp Step(dB)
Abbreviated
name
PRStep
Description
This parameter indicates the power ramp step used by
the UE when it does not receive any responses from
AICH after sending a preamble. This parameter is used
to be added to the previous power, and then the next
preamble is sent at this new power.
Range and Step
[1, 8]dB step 1dB
Unit
dB
Default Value
(note)
1dB
3
Power Control Parameters - POPpm
Parameter Power Offset between PRACH Control Part and PRACH
name
Data Part
Abbreviated
name
POPpm[MAX_ PRACH _TFC]
Description
This parameter indicates the power offset between control
part of the PRACH message part and the last preamble. It
should be configured for each TFC. Where
MAX_PRACH_TFC=32.
Range and
Step
-5 10 dB step 1dB
Unit
dB
Default Value
22
(note)
4
Power Control Parameters - PschPwr
Parameter name
Primary SCH Power(dB)
Abbreviated name PschPwr
Description
PSCH transmission power. This parameter is the offset
relative to PCPICH power.
Range and Step
[-35, +15]dB step 0.1dB
Unit
dB
Default Value
(note)
-3dB
5
Power Control Parameters - SschPwr
Parameter name
Secondary SCH Power(dB)
Abbreviated name SschPwr
Description
SSCH transmission power. This parameter is the offset
relative to PCPICH power.
Range and Step
[-35, +15] dB step 0.1dB
Unit
dB
Default Value
(note)
-4dB
6
Power Control Parameters - PcpichPwr
Parameter name
P-CPICH Power(dBm)
Abbreviated name PcpichPwr
Description
This parameter indicates the transmission power level
of the Primary CPICH (Common Pilot Channel), which
is an absolute value.
Range and Step
[-10.0, 50.0]dBm step 0.1dBm
Unit
dBm
Default Value
(note)
33.0dBm
Power Control Parameters - BchPwr
Parameter name
BCH Power(dB)
Abbreviated
name
BchPwr
Description
BCH transmission power. This parameter is the offset
relative to PCPICH transmission power. BCH is mapped
one to one to PCCPCH physical channel. In addition,
one cell only contains one PCCPCH/BCH.
Range and Step
[-35, +15]dB step 0.1dB
Unit
dB
Default Value
(note)
-3dB
8
Power Control Parameters - PchPwr
Parameter name
PCH Power(dB)
Abbreviated name PchPwr
Description
This parameter indicates the transmission power of the
PCH mapped on the SCCPCH, which is a power offset
relative to the PCPICH power.
Range and Step
[-35, 15]dB step 0.1dB
Unit
dB
Default Value
(note)
-3dB
9
Power Control Parameters - MaxFachPwr
Parameter name
Maximum FACH Power(dB)
Abbreviated name MaxFachPwr
Description
This parameter indicates the maximum transmission
power of the FACH which is mapped on the SCCPCH.
This parameter is the relative value based on the
PCPICH transmission power.
Range and Step
[-35, 15]dB step 0.1 dB
Unit
dB
Default Value
(note)
-1dB
10
Power Control Parameters - PichPwr
Parameter name
PICH Power(dB)
Abbreviated name PichPwr
Description
This parameter indicates the PICH transmission power,
which is an offset relative to the Primary CPICH power.
Range and Step
[-10, 5]dB step1 dB
Unit
dB
Default Value
(note)
-7dB
11
Power Control Parameters - AichPwr
Parameter name
AICH Power(dB)
Abbreviated name AichPwr
Description
This parameter indicates the AICH transmission power,
which is an offset relative to the Primary CPICH power.
Range and Step
[-22, 5]dB step 1dB
Unit
dB
Default Value
(note)
-7dB
12
