Scribd
Upload
51 views10 pages

Interlock Protection and Changeover Scheme of 2MB &1TB System

The document describes the interlocking and changeover schemes for a 2MB & 1TB power system. It outlines several conditions that must be met to close various isolators and circuit breakers, including that isolators can only be operated when their associated breakers are open to avoid parallel paths. The changeover process between main and tie breakers and between buses is also summarized, requiring specific isolators and breakers to be opened and closed in a set sequence.

Uploaded by

avg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
51 views10 pages

Interlock Protection and Changeover Scheme of 2MB &1TB System

The document describes the interlocking and changeover schemes for a 2MB & 1TB power system. It outlines several conditions that must be met to close various isolators and circuit breakers, including that isolators can only be operated when their associated breakers are open to avoid parallel paths. The changeover process between main and tie breakers and between buses is also summarized, requiring specific isolators and breakers to be opened and closed in a set sequence.

Uploaded by

avg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

Interlock Protection and Changeover

Scheme of 2MB &1TB system


Closing interlocks of Isolator-A/ B
1-st cond. (When any put into bus)
A)All poles of the breaker are open
B)Connected earth switch is open
C) CVT isolator close
D) Isolator B open
E) Selection is in remote
2-nd Cond. ( when bus changing over)
A) Breaker is closed
B) Isolator B is closed
C) Selection is in remote
Closing interlock of Isolator C
A)All poles of the breaker open
B) Earth switches in the both sides of isolator
are open
C) Selection is in Remote
Closing Interlocks of circuit breaker
A)All group A & group B lock out relays are in
reset condition
B) Auto reclose relay is in reset condition
C)All poles of the breakers are open
D)Bus bar differential relay is not operated
Selection of the breaker is in remote
Closing interlock of Isolator D
A)Isolator earth switch is open
B)All the other D isolator are in open
condition
C)Selection is in Remote condtion
Changeover Scheme

Changeover of bay from MB1 to MB2


Check the isolator physically and the castle
key.
The earthing isolator in open condition
Close the isolator of the bus in which bay will
be shifted.
Open the isolator of the bus from which the
bay has to be isolated
Changeover of the bay from Main breaker to
Bus coupler breaker
A) Check physically bus coupler bay, Bus
coupler breaker and Isolator D
B)Close isolator D
Close Isolator A/B & Isolator C of Bus coupler
bay
Close Bus coupler Breaker
Open Main Breaker
Open all the isolator of the main breaker
Isolator is an offline connector. Do not operate
it when breaker is closed. When paralla
current path is established isolator can be
operated.
Checking one bus is put into service after
shutdown
Check physically the bus
Close CVT isolator
Close both Bus tie isolators
Close Bus tie breaker.

You might also like