Delay-Fault Testing Tutorial
Acknowledgement: This presentation is adapted from
Professor Janak Patels tutorial on the same topic available
on the web at:
[Link]
Outline
Common Fault Models (Review)
Defects and Delay Faults
Delay Fault Models
Transition Faults
Path Delay Faults
Robust Path Test
Non-robust Path Test
Delay Fault Testing Tutorial 2
Common Fault Models
Fault Model Definition
Stuck-at Fault (SAF) Logic line stuck at 0 or 1
(can be single or multiple)
Bridging Signals x and y become
AND(x,y) or OR(x,y)
Stuck-open Signal x stuck in some
previous state
Delay An I/O path between clocked
elements has excessive delay
Coupling Signals x and y become F(x,y)
Pattern Interference Signals interact in space & time
Delay Fault Testing Tutorial 3
Delay Fault Testing Tutorial 4
Delay Fault Testing Tutorial 5
Delay Fault Testing Tutorial 6
Delay Fault Testing Tutorial 7
Delay Fault Testing Tutorial 8
Delay Fault Testing Tutorial 9
Delay Fault Testing Tutorial 10
Delay Fault Testing Tutorial 11
Delay Fault Testing Tutorial 12
Delay Fault Testing Tutorial 13
Delay Fault Testing Tutorial 14
Delay Fault Testing Tutorial 15
Only if no other path delay is increased.
Delay Fault Testing Tutorial 16
Delay Fault Testing Tutorial 17
Delay Fault Testing Tutorial 18
Delay Fault Testing Tutorial 19
Delay Fault Testing Tutorial 20
Delay Fault Testing Tutorial 21
Delay Fault Testing Tutorial 22
Exercise
Consider the 4-Nand implementation of the
XOR gate in the previous slide. There are
six I/O paths hence 12 path delay faults. For
each of these faults, determine if it is
robustly testable, only non-robustly testable
or not testable (functionally redundant).
Provide justification for your answers.
Delay Fault Testing Tutorial 23
Delay Fault Testing Tutorial 24
Delay Fault Testing Tutorial 25
Broadside is also called launch-off-capture test.
Skewed-Load is also called launch-off-shift test.
Delay Fault Testing Tutorial 26
Delay Fault Testing Tutorial 27
Delay Fault Testing Tutorial 28
Timing for
launch-off-capture
Transition-delay
fault testing
IC: Initialization Clock
LC: Launch Clock
CC: Capture Clock
SEN: Scan Enable
This figure is borrowed from theDelay
paper, Ahmed
Fault Testinget al., ITC-2005, Paper 11.1
Tutorial 29
Delay Fault Testing Tutorial 30
Timing for
launch-off-shift
Transition-delay
fault testing
IC: Initialization Clock
LC: Launch Clock
CC: Capture Clock
SEN: Scan Enable
Delay Fault Testing Tutorial 31
This figure is borrowed from the paper, Ahmed et al., ITC-2005, Paper 11.1
Delay Fault Testing Tutorial 32
Delay Fault Testing Tutorial 33
(See Prof. Patels website for details on Segment Test)
Delay Fault Testing Tutorial 34
Delay Fault Testing Tutorial 35
Delay Fault Testing Tutorial 36
