Scribd
Upload
258 views

General Design Considerations: "Storage Tanks"

The document discusses various considerations for the design and use of storage tanks. It describes different types of storage tanks including vertical cylindrical tanks, horizontal cylindrical tanks, spherical tanks, fixed roof tanks, and floating roof tanks. Fixed roof tanks are cheaper but allow vapors to escape while floating roof tanks are more expensive but trap vapors to reduce losses and risks. Tank material, thickness, construction, and protection against corrosion are also covered. Hazards associated with empty tanks are noted and the use of inert gas blankets is recommended when welding to prevent ignition.

Uploaded by

Hariq Hann
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
258 views

General Design Considerations: "Storage Tanks"

The document discusses various considerations for the design and use of storage tanks. It describes different types of storage tanks including vertical cylindrical tanks, horizontal cylindrical tanks, spherical tanks, fixed roof tanks, and floating roof tanks. Fixed roof tanks are cheaper but allow vapors to escape while floating roof tanks are more expensive but trap vapors to reduce losses and risks. Tank material, thickness, construction, and protection against corrosion are also covered. Hazards associated with empty tanks are noted and the use of inert gas blankets is recommended when welding to prevent ignition.

Uploaded by

Hariq Hann
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 28

General Design

Considerations
“Storage tanks”
Storage facilities are required for:

 Raw materials  Intermediate products  Final products

 Recycle materials  Off-grade materials  Fuels

 A storage tank is a container, usually for holding liquids, sometimes for compressed
gases (gas tank).

 The word "tank" originally meant "artificial lake" and came from India.

 Storage tanks are available in many shapes: vertical and horizontal cylindrical; open top
and closed top; flat bottom, cone bottom.

 Large tanks tend to be vertical cylindrical, or to have rounded corners (transition from
vertical side wall to bottom profile, to easier withstand hydraulic hydrostatically induced
pressure of contained liquid.
horizontal cylindrical tank
vertical cylindrical tank with flat bottom
vertical cylindrical tank with conical bottom
Spherical tanks
 Choice of storage tanks

 Tanks for a particular fluid are chosen according to the flash-point of that substance.

What is a flash point?

 Generally in refineries and especially for liquid fuels, there are:

A) fixed roof tanks, and

B) floating roof tanks.


A) Fixed roof tank

 Used for liquids with very high flash points, (e.g. fuel oil, water, bitumen etc.)
 Cone roofs, dome roofs and umbrella roofs are usual

fixed roof tank


FIXED ROOF TANK
Dome roof tank
Cone roof tank
Umbrella roof tank
Advantages of fixed roof tank:

 Easy to construct and cheap to build.

Disadvantages:

 Material losses due to the escape of vapour.

BREATHING LOSSES OF A FIXED-ROOF TANK


B) Floating roof tanks

The floating roof tanks are developed to store volatile liquids to minimize the loss of
valuable vapors, as well as, to minimize the hazard of dangerous vapor formation
underneath a fixed roof.

Floating roof tanks are broadly divided into:

1) external floating roof tanks (usually called as floating roof tanks: FR Tanks) and

2) internal floating roof types (IFR Tanks).

external floating roof type


external floating roof types
FR tanks do not have a fixed roof (it is open in the top) and has a floating roof only.

Applications of FR tanks:

Medium flash point liquids such as naphtha, kerosene, diesel, crude oil etc. are stored in

these tanks.
2) IFR tanks are used for liquids with low flash-points (eg. gasoline, ethanol). These tanks are
nothing but cone roof tanks with a floating roof (steel disc) inside which travels up and down
along with the liquid level.

 This floating roof traps the vapor from low flash-point fuels.

 Floating roofs are supported with legs on which they rest.

IFR tanks
HARD TOP PAN FLOATING ROOF TANK
Advantages of floating roof tanks:

 Reduce material losses and air pollution.

 Reduce fire and explosion risk due to very small vapour space.

Disadvantages:

 High cost.

Components of IFR tank


 Materials of construction for storage tanks
While steel remains one of the most popular choices for tanks, there are other materials
increasing in popularity such as:

 GRP
 Thermoplastic
 Polyethylene
 Fiberglass

They offer lower build costs and greater chemical resistance, especially for storage of
specialty chemicals.
 Tank Wall Thickness
The tank wall must withstand:
 Hydrostatic pressure of the liquid
 Wind loading

The minimum wall thickness required to resist the hydrostatic pressure can be calculated from
the equation:

where

Tt: tank thickness required at depth HL, mm;

HL: liquid depth, m;

ρL: liquid density, kg/m3;

E: joint efficiency (if applicable);

g: gravitational acceleration, 9.81 m/s2;

St: maximum allowable stress for tank material, N/mm2;

Dt: tank diameter, m.


Important note:

 Since most liquids can spill, evaporate, or seep through even the smallest opening, special
consideration must be made for their safe and secure handling.

 This usually involves building a bunding, or containment dike, around the tank, so that any
leakage may be safely contained. In some cases these area is called the tank farm.

Storage Tanks Farm


Tank failures

There have been numerous catastrophic failures of storage tanks. These failures may
be attributed to:

1. Poor design and construction, with a wall too thin to bear repeated loads from the
contents.

2. The tank had not been tested before use by filling with water, and was also poorly
riveted.

3. Corrosion problem, so storage tanks must be protected against corrosion (e.g cathodic
protection)

4. Faulty welding or by sub-standard steel.


However, storage tanks also present another problem, surprisingly, when empty. If they
have been used to hold oil or oil products such as gasoline, the atmosphere in the tanks may be
highly explosive as the space fills with hydrocarbons. If new welding operations are started,
then sparks can easily ignite the contents, with disastrous results for the welders.

Using an inert gas blanket to prevent explosive atmospheres building up from residues
may solve this problem.
Gas waste handling

You might also like