Scribd
Upload
80 views

Design and Fabrication of Mini Fire Fighting Robot Using Hc05 Bluetooth

This document describes the design and fabrication of a mini firefighting robot using HC05 Bluetooth. The robot is equipped with an 8051 series microcontroller, push buttons, DC motors, a transistor, and a robot body with a water tank. It also has resistors and a battery. The robot carries a water tank and uses a pump controlled via wireless communication to extinguish fires. Commands are sent from push buttons on a transmitter to a receiver that controls the robot's motors. The goal is to create a cost-effective robot that can autonomously detect and fight fires without human intervention.

Uploaded by

Jagan Mani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
80 views

Design and Fabrication of Mini Fire Fighting Robot Using Hc05 Bluetooth

This document describes the design and fabrication of a mini firefighting robot using HC05 Bluetooth. The robot is equipped with an 8051 series microcontroller, push buttons, DC motors, a transistor, and a robot body with a water tank. It also has resistors and a battery. The robot carries a water tank and uses a pump controlled via wireless communication to extinguish fires. Commands are sent from push buttons on a transmitter to a receiver that controls the robot's motors. The goal is to create a cost-effective robot that can autonomously detect and fight fires without human intervention.

Uploaded by

Jagan Mani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 13

DESIGN AND FABRICATION OF MINI FIRE FIGHTING ROBOT

USING HC05 BLUETOOTH

PROJECT MEMEBERS GUIDED BY


R.AKASH(510815114006) Mr. K.SENTHIL KUMAR M.E
R.JEEVA(510815114035) ASSISTANT PROFESSOR
MECHANICAL DEPT.
In today’s commercial, industrial and domestic world, Automation
plays an important role, it is actually an arrangement of different elements
in order to regulate, direct, sense and command itself to achieve a
desired result. “Automatic Fire Fighting Robot” project employs the
electrical thermostat technology for the controlling the fire 24 hrs. Robotics
has gained popularity due to the advancement of many technologies of
computing and nano technologies. So, we proposed to design something
that can make humans life easier and comfortable. There are many
possibilities a fire can start in an industry or in any remote area.
 8051 Series Microcontroller
 Push Buttons
 DC motors
 Transistor
 Robot Body With Water Tank

 Resistors
 Battery
 The robot vehicle loaded with the water tanker.
 The pump is controlled by wireless communication (RF and Mobile
communication).
 The transmitter end connected to the push buttons.
 Using this pushbutton commands are sent to the receiver and control
moment of the robot like forward, backward, left, right.

 The receiving end three motors are connected to the microcontroller


 Swati A. Deshmukh (2015) was discussed about the fire detection
system using sensors in the system, and program the fire detection and
fighting procedure using sensor based method .
 Abhilash Dhumatkar, Sumit Bhiogade (2015) was Automatic Fire
Fighting Robot” project employs the electrical thermostat technology for
the controlling the fire 24 hrs. The system is cost effective, has a wide
applications which when implement can show good and effective
result. Synchronization of various equipment involve in the system i.e
Thermostat Sensor, water jet, wireless remote and wireless android device
WiFi enabled Camera.
 Fire Fighting Robot Process
 It is a robot that autonomously detect and extinguish fire. It use flame
sensor for detection and arduino board for processing. Fire extinguisher
along with electronic valve (actuator) is used to extinguish the detected
fire.
 Capability of sensing accurately with increased flexibility
 No line of sight Not blocked by common materials.
 It can pass through solids Longer range
 This Project presents a Fire Fighting Robot Vehicle using RF
communication, and it designed and implemented MCU in embedded
system domain.

 Experimental work has been carried out carefully.


 The result shows that higher efficiency is indeed achieved using the
embedded system.
* The project has been motivated by the desire to design a system that can
detect fires and take appropriate action, without any human intervention.
* This provides us the opportunity to pass on to robots tasks that traditionally
humans had to do but were inherently life threatening.
* Fire-fighting is an obvious candidate for such automation.
THANK YOU

You might also like