Scribd
Upload
25 views21 pages

Optimizing Converged Cisco Networks (Ont) : Module 4: Implement The Diffserv Qos Model

Uploaded by

ccazorlaqsc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
25 views21 pages

Optimizing Converged Cisco Networks (Ont) : Module 4: Implement The Diffserv Qos Model

Uploaded by

ccazorlaqsc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 21

Optimizing Converged

Cisco Networks (ONT)

Module 4: Implement the DiffServ QoS Model

© 2006 Cisco Systems, Inc. All rights reserved.


Module 4: Implement
the DiffServ QoS
Model

Lesson 4.7: Introducing Traffic Policing and Shaping

© 2006 Cisco Systems, Inc. All rights reserved.


Objectives
 Explain the purpose and function of traffic conditioning
methods: policing and shaping.
 Compare and contrast traffic policing and traffic
shaping.
 Give examples of how policing and shaping are used in
typical network topologies.
 Describe the purpose and function of a token bucket.

© 2006 Cisco Systems, Inc. All rights reserved.


Traffic Conditioners
 Policing
Limits bandwidth by discarding traffic.
Can re-mark excess traffic and attempt to send.
Should be used on higher-speed interfaces.
Can be applied inbound or outbound.

 Shaping
Limits excess traffic by buffering.
Buffering can lead to a delay.
Recommended for slower-speed interfaces.
Cannot re-mark traffic.
Can only be applied in the outbound direction.

© 2006 Cisco Systems, Inc. All rights reserved.


Traffic Policing and Shaping Overview

 These mechanisms must classify packets before policing or shaping the


traffic rate.
 Traffic policing typically drops or marks excess traffic to stay within a traffic
rate limit.
 Traffic shaping queues excess packets to stay within the desired traffic
rate.
© 2006 Cisco Systems, Inc. All rights reserved.
Why Use Policing? Why Use Shaping?
 To limit access to resources  To prevent and manage
when high-speed access is congestion in ATM, Frame
used but not desired (subrate Relay, and Metro Ethernet
access) networks, where asymmetric
bandwidths are used along the
 To limit the traffic rate of
traffic path
certain applications or traffic
classes  To regulate the sending traffic
rate to match the subscribed
 To mark down (recolor)
(committed) rate in ATM,
exceeding traffic at Layer 2 or
Frame Relay, or Metro
Layer 3
Ethernet networks
 To implement shaping at the
network edge

© 2006 Cisco Systems, Inc. All rights reserved.


Policing Versus Shaping

 Incoming and outgoing directions.  Outgoing direction only.


 Out-of-profile packets are  Out-of-profile packets are queued
dropped. until a buffer gets full.
 Dropping causes TCP retransmits.  Buffering minimizes TCP
retransmits.
 Policing supports packet marking
or re-marking.  Marking or re-marking not
supported.
 Shaping supports interaction with
Frame Relay congestion
indication.
© 2006 Cisco Systems, Inc. All rights reserved.
Traffic Policing Example

 Do not rate-limit traffic from mission-critical server.


 Rate-limit file-sharing application traffic to 56 kbps.

© 2006 Cisco Systems, Inc. All rights reserved.


Traffic Policing and Shaping Example

 Central to remote site speed mismatch


 Remote to central site oversubscription
 Both situations result in buffering and in delayed or dropped packets.

© 2006 Cisco Systems, Inc. All rights reserved.


Token Bucket
 Mathematical model used by routers and switches to
regulate traffic flow.
 Tokens represent permission to send a number of bits
into the network.
 Tokens are put into the bucket at a certain rate by IOS.
 Token bucket holds tokens.
 Tokens are removed from the bucket when packets are
forwarded.
 If there are not enough tokens in the bucket to send the
packet, traffic conditioning is invoked (shaping or
policing).

© 2006 Cisco Systems, Inc. All rights reserved.


Single Token Bucket

 If sufficient tokens are available (conform action):


Tokens equivalent to the packet size are removed from the bucket.
The packet is transmitted.

© 2006 Cisco Systems, Inc. All rights reserved.


Single Token Bucket Exceed Action

 If sufficient tokens are not available (exceed action):


Drop (or mark) the packet.

© 2006 Cisco Systems, Inc. All rights reserved.


Single Token Bucket Class-Based Policing

Bc is normal burst size.


Tc is the time interval.
CIR is the committed information rate.
CIR = Bc / Tc

© 2006 Cisco Systems, Inc. All rights reserved.


Cisco IOS Traffic-Policing Mechanism

Class-Based Policing

Enable method Enabled in policy map

Conditions Conform, exceed, violate


Actions Drop, set, transmit

Single or dual token bucket, single- or dual-


Implementations
rate policing, multiactions

© 2006 Cisco Systems, Inc. All rights reserved.


Cisco IOS Traffic-Shaping Mechanisms

Class-Based Shaping FRTS

Shaper for any Shaper for Frame


Restriction
subinterface Relay only
Per DLCI or
Classification Class-based
subinterface
Link fragmentation No support for
Supports FRF.12
and interleaving FRF.12
Understands BECN Understands BECN
Frame Relay Support
and FECN and FECN

Configuration Supported via MQC Supported via MQC

© 2006 Cisco Systems, Inc. All rights reserved.


Applying Rate Limiting

© 2006 Cisco Systems, Inc. All rights reserved.


Self Check
1. Which traffic conditioning mechanism adds delay?
Why?
2. What are the recommendations for conditioning
mechanisms with regard to link speed?
3. Which mechanism has the ability to re-mark packets
that exceed the identified rate?
4. Does conform and exceed indicate with regard to the
token bucket?

© 2006 Cisco Systems, Inc. All rights reserved.


Summary
 Traffic conditioners are QoS mechanisms that limit
bandwidth, and include policing and shaping. Both of
these approaches limit bandwidth, but each has
different characteristics.
 Policing typically limits bandwidth by discarding traffic
that exceeds a specified rate.
 Shaping limits excess traffic, not by dropping it but by
buffering it.
 The token bucket is used to determine if traffic flow
exceeds or conforms to predetermined rates.

© 2006 Cisco Systems, Inc. All rights reserved.


Q and A

© 2006 Cisco Systems, Inc. All rights reserved.


Resources
 Policing and Shaping Overview
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps18
31/products_configuration_guide_chapter09186a00800c60d1.h
tml

 QoS Policing
http://www.cisco.com/en/US/partner/tech/tk543/tk545/tsd_techn
ology_support_protocol_home.html

 Comparing Traffic Policing and Traffic Shaping for


Bandwidth Limiting
http://www.cisco.com/en/US/partner/tech/tk543/tk545/technolog
ies_tech_note09186a00800a3a25.shtml

© 2006 Cisco Systems, Inc. All rights reserved.


© 2006 Cisco Systems, Inc. All rights reserved.

You might also like