Scribd
Upload
304 views17 pages

Writing A Program For Tapping Cycle On CNC Milling Machine

This lab covers writing a CNC program for tapping cycles on a milling machine. The document introduces tapping as cutting internal threads using spindle rotation. It discusses the G84 and G74 codes for right and left-hand tapping along with calculating the appropriate feed rate based on rpm and pitch. The program lists coordinates and code blocks to perform tapping cycles at two locations using different tools and spindle speeds.

Uploaded by

Mohsin Qazi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
304 views17 pages

Writing A Program For Tapping Cycle On CNC Milling Machine

This lab covers writing a CNC program for tapping cycles on a milling machine. The document introduces tapping as cutting internal threads using spindle rotation. It discusses the G84 and G74 codes for right and left-hand tapping along with calculating the appropriate feed rate based on rpm and pitch. The program lists coordinates and code blocks to perform tapping cycles at two locations using different tools and spindle speeds.

Uploaded by

Mohsin Qazi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 17

Lab 11

Writing A Program for Tapping


Cycle on CNC Milling Machine
Objective
• In this lab we have to learn about tapping cycle
operationusing CNC milling machine and
constructing a program for tapping cycle.
Introduction
• Tapping is the process of cutting a thread
inside a hole so that a cap screw or bolt can be
threaded into the hole.
Images
Images
Image
Images
Codes
• G84 Code: Tapping of right hand threads to be
done with M03 spindle rotation.
• G74 Code: Tapping of left hand threads to be
done with M04 spindle rotation.

G84 X Y Z R F
Feed Calculations
Feed = RPM * Pitch
If pitch= 0.5 mm RPM= 200 rpm
Feed = 200 * 0.5 mm
Feed = 100 mm/min
Figure
Coordinates

S.No X Y

1 40 45

2 90 45
Program
O0124
N05 G21;
N10 G91 G28 X0. Y0. Z0.;
N15 M06 T01;
N20 G43 H01;
N25 M08;
N30 M03 S900;
N35 G90;
Program
N40 G00 X40. Y45.;
N45 Z3.;
N50 G81 X40. Y45. Z-1.0 R3. F100;
N55 X90. Y45.;
N60 G80;
N65 G00 Z30.;
N70 G91 G28 X0. Y0. Z0.;
N75 M05;
Program
N80 M06 T02;
N85 G43 H02;
N90 M03 1000;
N95 X40. Y45;
N100 Z4.;
N105 G83 X40. Y45. Z-20.0 Q4. R3. F100;
N110 X90. Y45.;
N115 G80;
Program
N120 G00 Z30.;
N125 G91 G28 X0. Y0. Z0.;
N130 M06 T05;
N135 G43 H05;
N140 M03 S200;
N145 G00 X40. Y45.;
N150 Z4.;
N155 G84 X40. Y45. Z-20.0 R3. F100;
Program
N160 X90. Y45.;
N165 G80;
N170 M05;
N175 M09;
N180 G91 G28 X0. Y0. Z0.;
N185 M30;
Video Links
• https://www.youtube.com/watch?v=gD5ZcyzT
SQg&t=7s

You might also like