INTRODUCTION OF
PROPAGATION EFFECT
Ground Wave
Used for a low-frequency range transmission, mostly
less than 1 MHz. This type of propagation employs
the use of large antennas order of which is equivalent
to the wavelength of the waves and uses the ground
or Troposphere for its propagation. Signals over large
distances are not sent using this method. It causes
severe attenuation which increases with increased
frequency of the waves.
Sky Wave
Used for the propagation of EM waves with a
frequency range of 3 – 30 MHz. Make use of
the ionosphere so called due to the presence of
charged ions in the region of about 60 to 300
km from the earth surface. These ions provide a
reflecting medium to the radio or
communication waves within a particular
frequency range. We use this property of the
ionosphere for long-distance transmission of the
waves without much attenuation and loss of
signal strength.
Space Wave
Used for a line of Sight communication also
known as LoS. Space satellite communication
and very high-frequency waves use this
propagation method. It basically involves
sending a signal in a straight line from the
transmitter to the receiver. We must ensure that
for very large distances, the height of the tower
used for transmission is high enough to prevent
waves from touching the earth curvature thus
preventing attenuation and loss of signal
strength.
Propagation on satellite-
There are many phenomenon causing signal loss on
transmission through the earth’s atmosphere.
These are
(1)Atmospheric absorption(gaseous effects)
(2) Cloud attenuation(aerosol & ice particle effects)
(3)Tropospheric scintilation(refractive effects)
(4)Faraday rotation(An ionosperic effect)
(5) Ionospheric scintilation(A 2nd ionosperic effect)
(6)Rain attenuation
(7)Rain & ice crystal depolarisatin