Scribd
Upload
81 views13 pages

Useful Commands For Bss Trouleshooting

The document discusses various types of cell data including channel group data, base station output power, cell neighbor relation data, and system information data. It also covers locating data, radio network features like frequency hopping and transmitter coherent combining, and provides instructions for call tracing.

Uploaded by

Mangata Acaronar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
81 views13 pages

Useful Commands For Bss Trouleshooting

The document discusses various types of cell data including channel group data, base station output power, cell neighbor relation data, and system information data. It also covers locating data, radio network features like frequency hopping and transmitter coherent combining, and provides instructions for call tracing.

Uploaded by

Mangata Acaronar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 13

Cell Data

Absolute Radio Frequency Channel Number (ARFCN)


Main Parameters: CGI, BSIC, BCCHNO, AGBLK, MFRMS,
BCCHTYPE, DCHNO, SDCCH, TN, CBCH
Main Printout Commands: RLDEP(CELL DESCRIPTION DATA)
and RLCFP(CELL CONFIGURATION FREQUENCY DATA)

Channel Group
Main Parameter: CHGR
Main Printout Commands: RLDGP(CELL CHANNEL GROUP
DATA) and RXTCP(TG TO CHANNEL GROUP CONNECTION
DATA )

Base Station Output Power (in dBm)


Main Parameters: BSPWRB, BSPWRT, MSTXPWR
Main Printout Command: RLCPP(CELL CONFIGURATION
POWER DATA)
05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 1 Cell Analyses
Cell Neighbour Relation Data
Neighbour Relationship
These relationships control the handover between cells.
Relationship to an external cell must be SINGLE.
Thirty-two mutual neighbors can be defined for one cell.

Main Parameter: DIR, CAND, CS, KHYST, KOFFSETP,


KOFFSETN, LHYST, LOFFSETP, LOFFSETN, TRHYST,
TROFFSETP, TROFFSETN, AWOFFSET, BQOFFSET, HIHYST,
LOHYST, OFFSETP, OFFSETN, BQOFFSETAFR

Main Printout Command: RLNRP(NEIGHBOUR RELATION DATA )

05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 2 Cell Analyses


System Information Data

Main Parameter: ACCMIN, CCHPWR, CRH, DTXU, RLINKT,


NCCPERM, RLINKTAFR, RLINKTAHR, CB, MAXRET, TX, ATT,
T3212, CBQ, CRO, TO, PT, SIMSG, MSGDIST

Main Printout Command: RLSSP(CELL SYSTEM INFORMATION


SACCH AND BCCH DATA ), RLSBP(CELL SYSTEM
INFORMATION BCCH DATA) and RLSMP(CELL SYSTEM
INFORMATION BCCH MESSAGE DISTRIBUTION)

05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 3 Cell Analyses


Locating Data
Locating
In the locating process, the BSC selects the cell that will provide the
best connection between an MS and a BTS. If the BSC detects that,
for example, a neighboring cell provides a radio connection with
better signal strength, the BSC will initiate a change from the
current (serving) cell to the neighboring cell; this process is called
handover. The decision on a handover is based on two
Measurement Reports (MRs) from MS and BTS.
Main Parameter: TAAVELEN, TINIT, TALLOC, TURGEN,
EVALTYPE, THO, NHO, ASSOC, IBHOASS, IBHOSICH, IHOSICH,
BSPWR, BSRXMIN, BSRXSUFF, MSRXMIN, MSRXSUFF, SCHO,
MISSNM, AW, BSTXPWR, EXTPEN, HYSTSEP, MAXTA,
RLINKUP, RLINKUPAFR, RLINKUPAHR

Main Printout Command: RLLBP(BSC LOCATING DATA ),


RLLOP(CELL LOCATING DATA), RLLDP(CELL LOCATING
DISCONNECT DATA)
05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 4 Cell Analyses
Locating Data (1 of 2)
Locating
In the locating process, the BSC selects the cell that will provide the
best connection between an MS and a BTS. If the BSC detects that,
for example, a neighboring cell provides a radio connection with
better signal strength, the BSC will initiate a change from the
current (serving) cell to the neighboring cell; this process is called
handover. The decision on a handover is based on two
Measurement Reports (MRs) from MS and BTS.

05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 5 Cell Analyses


Locating Data (2 of 2)
Main Parameter: TAAVELEN, TINIT, TALLOC, TURGEN,
EVALTYPE, THO, NHO, ASSOC, IBHOASS, IBHOSICH,
IHOSICH, BSPWR, BSRXMIN, BSRXSUFF, MSRXMIN,
MSRXSUFF, SCHO, MISSNM, AW, BSTXPWR, EXTPEN,
HYSTSEP, MAXTA, RLINKUP, RLINKUPAFR, RLINKUPAHR,
PTIMHF, PTIMBQ, PTIMTA, PSSHF, PSSBQ, PSSTA,
SSEVALSD, QEVALSD, SSEVALSI, QEVALSI, SSLENSD,
QLENSD, SSLENSI, QLENSI, SSRAMPSD, SSRAMPSI

Main Printout Command: RLLBP(BSC LOCATING DATA ),


RLLOP(CELL LOCATING DATA), RLLDP(CELL LOCATING
DISCONNECT DATA), RLLPP(CELL LOCATING PENALTY
DATA), RLLFP(CELL LOCATING FILTER DATA)

05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 6 Cell Analyses


Radio Network Features
Frequency Hopping
Frequency Hopping
Instead of transmitting and receiving bursts on a fixed frequency,
the bursts will be sent on different frequencies configured in the
Channel Group.

Types
 Baseband Hopping
 Synthesizer hopping

Main Parameters:
HOP, HSN, BCCD, MAIO, FHOP

Main Printout Commands:


RXMOP (MANAGED OBJECT DATA-TG ) and RLCHP(CELL
CONFIGURATION FREQUENCY HOPPING DATA)
05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 7 Cell Analyses
Radio Network Features
TCC - Transmitter Coherent Combining

Transmitter Coherent Combining


The TCC increases the output power by 2,5dB combining two
transmitters, synchronized in phase and with the same information,
using the Hybrid Combiner.

Main Parameters: BSPWRB, BSPWRT and MPWR

Main Printout Commands: RXMOP (MANAGED OBJECT DATA-


TX) and RLCPP(CELL CONFIGURATION POWER DATA)

05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 8 Cell Analyses


Radio Network Features
Idle Channel Measurements - ICM

Idle Channel Measurements


The BTS measures the uplink interference on idle channels: Traffic
Channel (TCH) or Stand Alone Dedicated Control Channel
(SDCCH). This information can then be used during channel
allocation to select the best suited channel for a connection or for
statistical purpose.

Main Parameters: ICMBAND

Main Printout Command: RLCRP(CELL RESOURCES)

05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 9 Cell Analyses


Radio Network Features
Subcell Structure – OL and UL

Subcell Structure – OL and UL


The idea with OL/UL subcells is that traffic close to the site is
moved to the OL subcell, while the traffic closer to the cell border is
moved to the UL subcell. By controlling the traffic in this way, the
frequencies in the OL subcell can have a tighter reuse.

Main Parameters: SCTYPE

Main Printout Command: RLCPP(CELL CONFIGURATION


POWER DATA),RLCFP(CELL CONFIGURATION FREQUENCY
DATA) and RLDGP(CELL CHANNEL GROUP DATA)

05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 10 Cell Analyses


Radio Network Features
Extend Range Cell – XRA

Extend Range Cell


The Extended Range feature makes it possible to extend the radius
of a cell from 35 km up to a theoretical limit of 121 km.

Main Parameter: XRANGE

Main Printout Command: RLDEP(CELL DESCRIPTION DATA)

05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 11 Cell Analyses


Call Tracing
1- Printout the Resources in the desired Cell
Command: RLCRP

2- Identify the Logical Channel (LCH) to be analysed


Attribute: TCH or SDCCH

3- Perform the Call Tracing


Command: RAPTI

4- Analyse the information

05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 12 Cell Analyses


05/03813-EN/LZU 108 6882 Uen Rev B Ericsson AB 2008 13 Cell Analyses

You might also like