Scaffold Safety Awareness

1
 What Is A Scaffold?
An elevated, temporary work platform

Three basic types:

 Supported scaffolds -- platforms
supported by rigid, load bearing
members, such as poles, legs, frames,
& outriggers
 Suspended scaffolds -- platforms
suspended by ropes or other non-rigid,
overhead support
 Aerial Lifts -- such as “cherry pickers”
or “boom trucks”

2
 Hazards
Employees working on scaffolds are
exposed to these hazards:

• Falls from elevation – caused

by slipping, unsafe access, and
the lack of fall protection
• Struck by falling tools / debris
• Electrocution – from overhead
power lines
• Scaffold collapse - caused by
instability or overloading
• Bad planking giving way

3
Fall Hazards
Falls may occur:
 While climbing on or
off the scaffold
 Working on
unguarded scaffold
platforms
 When scaffold
platforms or planks fail

4
Protecting Workers from Falls
If a worker on a scaffold
can fall more than 10
feet, protect them by:
 Guardrails, and/or
 Personal Fall Arrest
Systems (PFAS)

5
 Guardrails
Install along open sides & ends
Front edge of platforms not
more than 12 inches from the
work, unless using guardrails
and/or PFAS
Top rails - 36 to 43 inches tall
Midrails halfway between
toprail and platform
Toeboards at least 3-1/2 inches
high

6
Personal Fall Arrest Systems (PFAS)

You must be trained how to properly use PFAS

PFAS include anchorage, lifeline and body harness.

7
 Fall Protection Requirements

Can use PFAS instead of
guardrails on some scaffolds,
must be tagged advising
PFAS requirements.

Use PFAS & guardrails on
suspension scaffolds

Use PFAS on erectors and
dismantlers of scaffold
systems. The ends of this scaffold
are not properly guarded

8
Falling Object Protection

Wear hardhats

Barricade area below scaffold
to forbid entry into that area

Use panels or screens if
material is stacked higher than
the toeboard

Build a canopy or erect a net
below the scaffold that will
contain or deflect falling objects

9
Overhead Power Lines

The possibility of
electrocution is a
serious consideration
when working near
overhead power lines

Check the clearance

distances listed in the
standard

10
Scaffold Support Examples

Base
plate

Mud sills

Good support Inadequate support –

in danger of collapse?

11
Essential Elements of Safe
Scaffold Construction
• Use appropriate
scaffold construction
methods

• Proper scaffold access

• Properly use a
competent person

12
Scaffold Platform Construction

Platforms must:
• be fully planked or
decked with no
more than 1 inch
gaps
• be able to support
its weight & 4 times
maximum load
• be at least 18
inches wide
This is not a properly
constructed scaffold

13
 Scaffold Platform Construction
• No large gaps in front
edge of platforms
• Each abutted end of
plank must rest on a
separate support
surface
• Overlap platforms at
least 12 inches over
supports, unless
restrained to prevent
movement
Planks not properly
overlapped

14
Scaffold Platform Construction

• No paint on wood platforms

• Use scaffold grade wood
• Fully planked between front
upright and guardrail support
•Component pieces used must
match and be of the same type
• Erect on stable and level ground
• Lock wheels and braces

15
Scaffold Height

The height of the

scaffold should not
be more than three
times the least
lateral dimension
unless guys, ties,
or braces are used

16
 Scaffold Engineering Requirements

Frame scaffolds over 15 metres (50 feet) in height

Must be designed by a Professional Engineer
 Scaffold Engineering Requirements
Tube & Clamp and System scaffolds over 10 metres (33 feet) in
height must be designed by a Professional Engineer
 Platform Ends

Each end of a
platform, unless
cleated or otherwise
restrained by hooks,
must extend over its
support by at least 6
inches

No Cleats

19
Supported Scaffolds
Platforms supported by legs,
outrigger beams, brackets,
poles, uprights, posts, & frames

Restrain from tipping by guys,

ties, or braces

Scaffold poles, legs, posts,

frames, and uprights must be
on base plates and mud sills or
other firm foundation
This support is not adequate!

20
 Proper Scaffold Access
Provide access when scaffold
platforms are more than 2 feet
above or below a point of access

Permitted types of access:

 Ladders, such as portable,
hook-on, attachable, stairway
type, and built-ins
 Stair towers
 Ramps and walkways

May use building stairs and come

out window

21
 Scaffold Access
• No access by
crossbraces
• When using
ladders, bottom
rung no more than
24 inches high
• Can use some end
frames
• Can access from
another scaffold, Do not access
structure or hoist End Frame by crossbraces

22
 Suspension Scaffolds
Platforms suspended by ropes or wires. Rope must be capable
of supporting 6 times the load
Train employees to recognize hazards
Secure/tie to prevent swaying
Support devices must rest on surfaces
that can support four times the load
Competent person:
 evaluate connections to ensure the
supporting surfaces can support load
 inspect ropes for defects before shift

PFAS must have anchors independent of

the scaffold support system

23
 Moving Scaffolds
Employees can’t be on a moving
scaffold unless:
• Surface is level
• A PFAS is used and attached
to a fixed support
• Outriggers are installed on
both sides of scaffolds

Employees can’t be on scaffold

part beyond the wheels

Competent person must be on

site to supervise

24
 Fatal Fact – Moving a Lift
Employee was operating an
aerial lift, with an extendable
boom rotating work platform

The boom was fully extended

and the machine apparently ran
over some bricks, causing the
boom to flex or spring, throwing
the employee from the basket

The employee fell 37 feet to a

concrete surface

25
Don’t use Shore or Lean-to Scaffolds

Shore scaffold Lean-to scaffold

supported scaffold supported scaffold
which is placed which is kept erect
against a building by tilting it toward
or structure and and resting it
held in place with against a building
props or structure

26
Using Scaffolds

Don’t work on snow

or ice covered platforms
during storms or high
winds
Use tag lines on
swinging loads
Protect suspension
ropes from heat & acid
A covered scaffold has special
wind load considerations

27
Fatal Fact – Ice & No Guardrails
Laborer was working on the
third level of a tubular
welded frame scaffold which
was covered with ice and
snow

The scaffold was not fully

decked, there was no
guardrail and no access
ladder

The worker slipped and fell

head first 20 feet to the
pavement below
28
 Overhand Bricklaying
from Supported Scaffolds

A guardrail or personal fall arrest system is required

on all sides except the side where the work is
being done

29
Competent Person

Person capable of identifying and

promptly correcting hazards

Determines if it’s safe to work on a

scaffold during storms or high
winds

Trains workers to recognize hazards

Selects qualified workers to conduct

work

30
Scaffold Inspection
Competent person
inspects scaffolds
for visible defects
before each shift
and after any
alterations

Defective parts must

be immediately
repaired Deformed bearer

31
 Scaffold Erection
Scaffolds can only be
erected, moved,
dismantled or
altered under the
supervision of a
competent person

Competent person
selects & directs
these workers and
determines the
feasibility of fall
protection

32
 Training Requirements
Train employees on scaffold
hazards and procedures to
control the hazards

The training must include:

• Nature of electrical, fall, and
falling object hazards
• How to deal with electrical
hazards and fall protection
systems
• Proper use of the scaffold
• Scaffold load capacities

Retrain as necessary

33
 Training Erectors

Train employees involved in

erecting, disassembling,
moving, operating,
repairing, maintaining, or
inspecting a scaffold to
recognize its hazards and
the correct procedures to
use

34
 Avoid the Main Hazards of Scaffolds
Fallsfrom elevation Getting struck by falling
Bad planking
tools or debris
Scaffold collapse
Improper loading or
Electrocution
overloading Platforms without guardrails
Climbing up or down scaffolds
Moving scaffold with
workers on the platform

35
 Summary
Remember to:
Useappropriate scaffold construction
methods
 Erect, move, or alter scaffold properly
 Protect from falling objects or tools
Ensure stable access
Use a competent person
 Train on scaffold construction and the hazards
involved with scaffolds
 Inspect scaffold before each shift and after
alterations
 Determine fall protection requirements

36