ME 310 [Mechanics of Machines]

Lecture 2
Degrees of Freedom

Instructor: Dr. Mir Md Maruf Morshed

 Mechanisms
A mechanism with four links is known as simple
mechanism, and the mechanism with more than four
links is known as compound mechanism.

Planar Motion and Planar mechanism:

If all points in a mechanism move in parallel planes, the
system undergoes planar motion and the mechanism
may be described as a planar mechanism.

Note: All mechanism that we will deal with are planar

mechanisms

Mechanics of Machines,
Dr. Mir Md Maruf Morshed 2
Unit 1 - Lecture 2
 Mobility/Degree of Freedom
 Degree of freedom of a planar link: the precise position of a
planar link is defined through the location of the its center with
respect to the origin of the fixed Cartesian coordinate and the
angle measured from a reference position (usually the x-axis).
See the following Figure. this means that any planar link has 3
DOF.

Mechanics of Machines,
Dr. Mir Md Maruf Morshed 3
Unit 1 - Lecture 2
 Mobility/Degree of Freedom
 Degree of freedom of a kinematic pair: is the number the
relative motions between the two connected elements, which are
allowed by this pair.
 The following table lists all the kinematic pairs and their degree
of freedom
Kinematic Pair Figure Symbol Degree of Freedom

Rotary R 1

Sliding/ P 1
Prismatic

Helical H 1

Mechanics of Machines,
Dr. Mir Md Maruf Morshed 4
Unit 1 - Lecture 2
 Mobility/Degree of Freedom

Kinematic Pair Shape Symbol Degree of Freedom

Cylindrical C 2

Spherical S 3

Planar F 3

Link against Plane RP 2

Pin in slot RP 2
Mechanics of Machines, 5
Dr. Mir Md Maruf Morshed
Unit 1 - Lecture 2
 Mobility/Degree of Freedom
 Mobility : the mobility of a mechanism is defined as the number of
independent parameters (variables) required to precisely specify the
positions of all the links of this mechanism.
 Degree of freedom: the mobility of a planar mechanism is called the degree
of freedom of the mechanism. The degree of freedom of a mechanism could
also be defined as the number of independent parameters we must specify to
determine the position of every link relative to the frame or fixed link.
 Most of the time, these independent variables/ parameters are angles.
 The following figure shows a single degree of freedom and a double degrees
of freedom planar mechanisms.

Mechanics of Machines, Dr. Mir Md Maruf Morshed 6

Unit 1 - Lecture 2
 Gruebler Form
 To determine the mobility or the degree of freedom of planar mechanisms,
the following equation which is called Grubler or Kutchback form is used.

“M” or “DOF” = 3(l-1) – 2J1 – J2

Where;
 M refers to the mobility and DOF refers to the degree of
freedom. M is practically equal to the number of motors which
are sufficient for full control on the mechanism motions.
 l : the total number of links including the fixed one
 J1 (Pl): the number of full joints or lower pairs Pl. These pairs
have a single degree of freedom.
 J2 (Ph): the number of half joints or higher pairs Ph. These pairs
have two degrees of freedom.
Mechanics of Machines,
Dr. Mir Md Maruf Morshed 7
Unit 1 - Lecture 2
 Gruebler Form
Based on the degrees of freedom calculated using the Grubler
form, the kinematic chain will be one of the following cases:
M = 2, 3, …… (unconstrained mechanism and to be constrained
we need to add number of drivers which are equal to the
calculated M at specified locations)
M = 1 (constrained mechanism, where a motor is enough to
make full control on the motion of the mechanism).
M = 0 (structure)

M = -1 (undetermined structure)

M = -2 (super structure)
Mechanics of Machines,
Dr. Mir Md Maruf Morshed 8
Unit 1 - Lecture 2
 Solved Examples
For the two kinematic chains shown in the following Figures, find the
mobility (DOF) and determine whether they are mechanisms or
structures.

DOF=1 DOF=0
Figure 1 Figure 2
Mechanics of Machines
Dr. Mir Md Maruf Morshed 9
Unit 1 - Lecture 2
 Solved Examples
Solution:

L=8

J1 (Pl) = 10

J2 (Ph) = 0

“M” or “DOF” = 3(l-1) – 2J1 – J2

M = 3 (8-1) – 2*10 – 0 = 1
The kinematic chain is a constrained mechanism
Mechanics of Machines,
Dr. Mir Md Maruf Morshed 10
Unit 1 - Lecture 2
 Solved Examples
Solution:

L=6

J1 (Pl) = 7

J2 (Ph) = 1

“M” or “DOF” = 3(l-1) – 2J1 – J2

M = 3 (6-1) – 2*7 – 1 = 0
The kinematic chain is a structure
Mechanics of Machines,
Dr. Mir Md Maruf Morshed 11
Unit 1 - Lecture 2
 Solved Examples

The kinematic chain in (a) has 5 links and 5 lower pairs,

then the degrees of freedom is 2 and it is unconstrained
Mechanism.
The one in (b) has an extra higher pair as the connection
between the two discs is in line. Its degree of freedom is
unity and it is a constrained mechanism
Mechanics of Machines,
Dr. Mir Md Maruf Morshed 12
Unit 1 - Lecture 2
 Odd Cases of Gruebler Form Failure
 Sometimes, the Gruebler fails to determine the actual mobility of the kinematic chain
as the following cases.

Mechanics of Machines,
Dr. Mir Md Maruf Morshed 13
Unit 1 - Lecture 2
 Solved Examples

DOF=1

Mechanics of Machines, 14
Dr. Mir Md Maruf Morshed
Unit 1 - Lecture 2
 Practice Problems
For the linkages shown below, find the degrees of freedom and determine whether
it is a structure (which degree) or mechanism (constrained/unconstrained)

DOF=0 DOF=1 DOF=2 DOF=0 DOF=-1

DOF=2 DOF=1
DOF=1
DOF=1

DOF=1

DOF=3
DOF=0
DOF=1

Mechanics of Machines,
Dr. Mir Md Maruf Morshed 17
Unit 1 - Lecture 2
 Practice Problems
For the figure numbers listed below in the table with the corresponding pages in the
textbook, find the degrees of freedom and determine whether it is a structure (which
degree) or mechanism (constrained/unconstrained)

Figure Page
1.37 and 1.38 23
1.50 32
1.54a and 1.54b 35
P1.1a and P1.1b 35
All figures 36

Mechanics of Machines
Dr. Mir Md Maruf Morshed 18
Unit 1 - Lecture 2