Scribd
Upload
105 views15 pages

Automatic Feed Cutting Mechanism

This document describes an automatic feed cutting mechanism that uses simple lever mechanisms powered by a motor to automatically feed and cut stock. The mechanism converts rotary motion from the motor into linear motion to horizontally feed material and vertically cut holes into thin metal sheets. The automatic mechanism aims to increase accuracy and decrease mistakes compared to human operation while allowing for mass production. It has applications in punching holes in thin metal sheets for industries.

Uploaded by

lost wolf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
105 views15 pages

Automatic Feed Cutting Mechanism

This document describes an automatic feed cutting mechanism that uses simple lever mechanisms powered by a motor to automatically feed and cut stock. The mechanism converts rotary motion from the motor into linear motion to horizontally feed material and vertically cut holes into thin metal sheets. The automatic mechanism aims to increase accuracy and decrease mistakes compared to human operation while allowing for mass production. It has applications in punching holes in thin metal sheets for industries.

Uploaded by

lost wolf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 15

AUTOMATIC FEED CUTTING

MECHANISM
• Presented by:- 
• Raj Rajendra Bhagat.
• Vipul Vikas Mohite.
• Shivshankar Rampravesh Vishwakarma.
• Ruturaj
INTRODUCTION
This mechanism automatically feeds its stock and performs the
cutting operation. It involves simple lever mechanisms. Here the
power input for the machine is provided by means of a motor. It
involves simple mechanisms which transfers the motion from one
form to the other. This mechanism is very useful in making holes on
metal sheets in industries by changing the tool.
MECHANISM
• A group of rigid bodies connected to each other by rigid kinematic
pairs (joints) to transmit force and motion. A machine consists of a
number of parts or bodies, the mechanism of the various parts or
bodies from which the machine is assembled. This is done by
making one of the parts fixed, and the relative motion of other
parts is determined with respect to the fixed part..
OBJECTIVES
• The main theme is used to feed the raw material
automatically to the machine and make holes
simultaneously with a particular gap. To decrease the
mistakes made by human – To increase the accuracy.
PARTS USED
• Links • Frame
• Fixing Table • Cutting Tool
• Battery (9v) • Feeding Tool
• Motor
WORKING PRINCIPLE OF AUTOMATIC
FEED CUTTING MECHANISM

• The working principle of an automatic feeding mechanism is to


covert rotary motion to linear motion. The feeding operation is
run with the feeding tool fixed to one end of the links which
moves horizontally. The cutting tool is fixed to another end of the
link which moves vertically. This results in making holes for thin
and light metal forms.
WORKING OF AUTOMATIC FEED
CUTTING MECHANISM
• The working principle of an automatic feeding mechanism is to convert rotary
motion to linear motion it works with the help of an AC Motor 0.5hp single
phase which runs with speed of 1500rpm generating 240volts power. The motor
weighs about 1kg. Links are screwed with 8mm iron bolts and nuts. The feeding
operation is runes with the feeding tool fixed to one end of the links which
moves horizontally. The cutting tool is fixed to another end of the link which
moves vertically. This results in making holes for thin and light metal forms.
NEED FOR AUTOMATION
• Nowadays almost all the manufacturing process is being atomized in
order to deliver the products at a faster rate. The manufacturing operation
is being atomized for the following reasons. .
To achieve mass production
To reduce man power
ADVANTAGES
• Reduction in production cost and time.
• Material handling is reduced.
• Reduce man power
• Achieve mass production
DISADVANTAGES
• It can be used for cutting thin sheets at regular
intervals.
• Here using a tool bit of small diameter, therefore it
is suitable to make small holes only.
APPLICATIONS
• It can be used for punching holes on to thin sheet metals.
• It can be used for stitching thick gunny bags in industries.
• It can be used for cutting thin sheets at regular intervals
• To reduce the production cost
• To reduce the production time
• To reduce the material handling
FUTURE SCOPE
• This project has scope in production industries and mechanical
workshop where feed cutting operation is carried out, since company
demands higher production at cheaper cost. Mechanism of feed cutting
will help the industries to punching holes and automation makes it easy.
Humans efforts are less by undertaking atomization in machine. This
project will give the idea of design and atomization.
CONCLUSION
• Fabrication of this project uses simple ideas and mechanism to
achieve a simple set of actions and is intended to initiate the feeding\
operator. However these mechanisms are expensive for small scale
industries. Major problem encountered is the changing of the feed is
not easy. It can produce 30 holes per minute
Thank You

You might also like