Scribd
Upload
65 views20 pages

Sigma-Delta Modulation (Σ-Δ) old

Sigma-Delta modulation is a technique for analog-to-digital conversion that provides higher resolution than traditional Nyquist rate converters. It works by oversampling the analog signal at a rate much higher than Nyquist rate, and then applying noise shaping through a feedback loop containing integration. This pushes quantization noise out of the baseband, allowing for simpler anti-aliasing filters and greater signal-to-noise ratio. The sampled data is then decimated to retrieve the original sampling rate, with increased resolution achieved through averaging of samples. Sigma-Delta modulation is now commonly used in analog-to-digital converters.

Uploaded by

Mustafa_elec
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
65 views20 pages

Sigma-Delta Modulation (Σ-Δ) old

Sigma-Delta modulation is a technique for analog-to-digital conversion that provides higher resolution than traditional Nyquist rate converters. It works by oversampling the analog signal at a rate much higher than Nyquist rate, and then applying noise shaping through a feedback loop containing integration. This pushes quantization noise out of the baseband, allowing for simpler anti-aliasing filters and greater signal-to-noise ratio. The sampled data is then decimated to retrieve the original sampling rate, with increased resolution achieved through averaging of samples. Sigma-Delta modulation is now commonly used in analog-to-digital converters.

Uploaded by

Mustafa_elec
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 20

Sigma-Delta

Modulation (Σ-Δ)

By Mustafa Qays

1
Outlines

Introduction to ADC

Quantization

Oversampling and Decimation Basics

Delta Modulation

Sigma-Delta Modulation

Applications

2
Introduction
The performance of digital signal processing and
communication systems is generally limited by the precision of
the digital input signal which is achieved at the interface between
analog and digital information. Sigma-Delta (Σ−∆) modulation
based analog-to-digital (A/D) conversion technology is a cost
effective alternative for high resolution converters which can be
ultimately integrated on digital signal processor ICs.

3
Analog to Digital Converter (ADC)

4
5
ADC Types
Most A/D converters can be classified into two groups
according to the sampling rate criteria. Nyquist rate
converters, (such as a successive approximation register
(SAR), double integration), and oversampling converters
(such as Sigma-Delta), sample analog signals which have
maximum frequencies lightly less than the Nyquist
frequency, fN = fs/ 2, where fs is the sampling frequency.
Meanwhile, oversampling converters perform the sampling
process at a much higher rate.
Conventional high-resolution A/D converters, such as
successive approximation and flash type converters,
operating at the Nyquist rate (sampling frequency
approximately equal to twice the maximum frequency in the
input signal), often do not make use of exceptionally high
speeds achieved with a scaled VLSI technology.
6
Conventional A/D converters

7
Anti-aliasing filter
The anti-aliasing filter must have flat
response over the frequency band of interest
(baseband) and attenuate the frequencies
above the Nyquist frequency enough to put
them under the noise floor.
Also, the non-linear phase distortion caused
by the anti-aliasing filter may create harmonic
distortion such as audible degradation.

8
Resolution (Word lenght)
For high-resolution Nyquist samplers,
establishing the reference voltages is a serious
challenge. For example, a 16-bit A/D converter,
which is the standard for high accuracy A/D
converters, requires 216 - 1 = 65535 different
reference levels. If the converter has a 2V input
dynamic range, the spacing of these levels is only
30 mV apart. This is beyond the limit of component
matching tolerances of VLSI technologies

9
Quantization Error
The process of converting an analog signal
(which has infinite resolution by definition) into a
finite range number system (quantization)
introduces an error signal that depends on how
the signal is being approximated.

Where q is the quantization step size, B is the numbers of bits


10
Quantization Noise
The quantization error can be represented as noise e(n):

The error term e(n) is a random quantity in the interval


(-q/2, q/2) with equal probability. Then the noise power
σe2(variance), can be found as:

11
Noise Power Spectral Density
The noise power is spread over the entire frequency
range equally, the level of the noise power spectral density
N(f) can be expressed as:

12
Oversampling and Decimation
An oversampling converter generally uses a sequence of
coarsely quantized data at the input oversampling rate of
Fs, followed by a digital-domain decimation process

Fs=N fs
Where Fs is the oversampling frequency, fs is the Nyquist sampling frequency,
N is the oversampling ratio

13
Oversampling advantages
Reduces the requirement order anti-aliasing filter

The complexity of the filter is a strong function of the ratio


of the width of the transition band to the width of the
passband, oversampled converters require considerably
simpler anti-aliasing filters than Nyquist rate converters with
similar performance (a simple RC lowpass filter at inputis
often sufficient)

14
Reduces the requirement order anti-aliasing filter

15
Reduces the in-band quantization noise
(increase SNR)
If the sample rate is increased from
the sample rate needed to fulfill the
Nyquist criterion to a new frequency
Fs the noise power density (power
per Hertz) is reduced with the ratio of
the sample rates
In a fixed bandwidth the signal-to-
noise ratio will increase by the same
oversampling ratio N

16
Decimation

The decimation process can


be used to provide increased
resolution. To see how this is
possible conceptually, this figure
shows an example of 16:1
decimation process with 1-bit
input samples. Although the input
data resolution is only 1-bit (0 or
1), the averaging method
(decimation) yields more
resolution (4 bits) through
reducing the sampling rate by
16:1. Of course, the price to be
paid is high speed sampling at the
input speed is exchanged for
resolution.

17
Delta Modulation
Delta modulation (DM) is an
analog-to-digital and digital-to-
analog signal conversion
technique used for transmission of
voice information where quality is
not of primary importance. DM is
the simplest form of differential
pulse-code modulation (DPCM)
where the difference between
successive samples is encoded
into n-bit data streams. In delta
modulation, the transmitted data is
reduced to a 1-bit data stream.

The integration of delta modulated


signal yields the approximation of
the analog input signal. Thus,DM
carries the information of the input
signal.

18
Slope Overload

Delta modulators exhibit slope overload for rapidly rising input


signals, and their performance is thus dependent on the
frequency of the input signal.

19
Sigma-Delta Modulation (Σ-Δ)
 Sigma-Delta conversion is a form of signal
quantization that can be used in analog-to
digital,digital-to-analog and digital-to-digital
conversions of signals.

20

You might also like