INTRODUCTION TO DATA COMMUNICATION NETWORK

AUG1 2011

Outline
Basic concepts in communications Understanding Networking. Understanding Transmission Medium (Network Cables) Understanding Network Hardware WAN and LAN Understanding Network Protocols

Basic Concepts in Communication

Basic Concepts
Communications activity associated with distributing or exchanging information Telecommunications technology of communications at a distance that permits information to be created any where and used everywhere with little delay Today it, involves
Data: digital and analog Voice: spoken word Video: telelcommunication imaging

Essentials for Communications

Must have a message Message must have a transmitter Message must have a medium Message must be understood Message must have some level of security
Destination System

Source System

Source Transmitter Transmission Receiver Destination

1 2 Workstation/PC 3 Medium 4 5 Workstation/PC 6

Essentials for Communications

1. 2. 3. 4. 5. 6. Text input information Input data digital bit stream Transmitted analog signal Received analog signal Output data digital bit stream Text output information

Source System

Destination System

Source Transmitter Transmission Receiver Destination

1 2 Workstation/PC 3 Medium 4 5 Workstation/PC 6

Understanding Networking

NETWORK
What do you see here for a typical network?

Key Network Terminology Explained (1)

Networks needs to interconnect at a distance by a form of point to point or point to multiple point connected media A network is a group of computers connected together in such a way as to allow Networks that are interconnected have proven to be low cost, reliable, and efficient means of communicating at a distance

Key Network Terminology Explained (2)

Node: anything connected to the network, usually a computer, but it could be a printer or a scanner Segment: any portion of a network that is separated by a switch, bridge or a router from another part of a network. Backbone: the main cabling of a network that all of the segment connect to. Usually, the backbone is capable of carrying more information than the individual segments. Topology: The way each node is physically connected to the network

Common Topologies - Bus

Bus: each node is daisy-chained (connected one right after the other) along the same backbone. Information sent from a node travels along the backbone until it reaches its destination node.

Common Topologies - Ring

Ring: Similar to a bus network, rings have nodes daisy chained, but the end of the network in a ring topology comes back around to the first node, creating a complete circuit. Each node takes a turn sending and receiving information through the use of a token. The token along with any data is sent from the first node to the second node which extracts the data addressed to it and adds any data it wishes to send. Then second node passes the token and data to the third node, etc. until it comes back around to the first node again. Only the node with the token is allowed to send data . All other nodes must wait for the token to come to them.

Common Topologies - Star

In a star network, each node is connected to a central device called a hub. The hub takes a signal that comes from any node and passes it along to all the other nodes in the network.

A hub does not perform any type of filtering or routing of the data. A hub is a junction that joins all the different nodes together.

Common Topologies - Star

In a star network, each node is connected to a central device called a hub. The hub takes a signal that comes from any node and passes it along to all the other nodes in the network.

Common Topologies Star Bus

Prob. Most common topology used today. Combines elements of the star and bus topologies to create a versatile network environment. Nodes in particular areas are connected to hubs (and create star topology), and hubs are connected together along the network backbone (like a bus network). Often you have stars nested within stars.

Other network topologies (architecture)

Some basic network topologies not previously mentioned: One-to-one Hierarchical Hybrid Client-server Multiple nodes

Key Network Terminology Explained (3)

Simplex: information flows in only one direction Half-duplex: information flows in two directions, but only in one direction at a time. Full-duplex: information flows in two directions at the same time

Basic Signal Terminologies

Kilo Mega Giga Tera Peta Exa Zetta Yotta K M G T P E Z Y 2^10 2^20 2^30 2^40 2^50 2^60 2^70 2^80

Bit: binary digit, either 0 or 1 Baud (dont really use anymore; not accurate) = one electronic state change per second Bit rate a method for measuring data transmission speed bits per second Mbps millions of bits per second (data speed; measure of bandwidth = total information flow over a given time) on a telecommunication medium 8 bits = 1 byte Mb million bits (quantity of data) MB million bytes (quantity of data) Gbps Billion bits per second (data speed) Teraflops trillion operations per second

Data Transmission
Successful transmission of data depends on:
The quality of the signal being transmitted Characteristics of the transmission medium

Data rate bits per second in data communications Bandwidth bandwidth or signal is constrained by the transmitter and the nature of the transmission in cycles per second or hertz Noise Average level of noise over the communication path. Error rate rate at which errors occur where error in 1 or 0 bit occurs

Understanding Transmission Medium

Basic transmission medium concepts

Medium is the physical path between transmitter and receiver in a data transmission system Guided Medium: waves are guided along a solid medium path (twisted pair, coaxial cable, and optical fiber). Unguided medium: waves are propagated through the atmosphere and inner/outerspace (satellite, laser, and wireless transmissions).

Medium examples by type

Conductive: twisted pairs and coaxial cables Electromagnetic: microwave Light: lasers and optical fibers (need clear line of sight) Wireless inner/outerspace; satellite (omnidirectional security issues)

Coaxial cable (1)

Widely installed for use in business and corporation ethernet and other types of LANs. Consists of inter copper insulator covered by cladding material, and then covered by an outer jacket Inner conductor is solid copper metal Physical Ds
Separated by insulating material Outer conductor is braided shielded (ground) Covered by sheath material

Coaxial cable (2)

Applications: TV distribution (cable tv); long distance telephone transmission; short run computer system links Local area networks

Transmission characteristics: Can transmit analog and digital signals Usable spectrum for analog signaling is about 400 Mhz Amplifier needed for analog signals for less than 1 Km and less distance for higher frequency Repeater needed for digital signals every Km or less distance for higher data rates Operation of 100s Mb/s over 1 Km.

Twisted Pair Cables

Physical description:
Each wire with copper conductor Separately insulated wires Twisted together to reduce cross talk Often bundled into cables of two or four twisted pairs If enclosed in a sheath then is shielded twisted pair (STP) otherwise often for home usage unshielded twisted pair (UTP). Must be shield from voltage lines

Application:
Common in building for digital signaling used at speed of 10s Mb/s (CAT3) and 100Mb/s (CAT5) over 100s meters. Common for telephone interconnection at home and office buildings Less expensive medium; limited in distance, bandwidth, and data rate.

Categories of Twisted Pairs Cabling System

Specs describe cable Material, type of Connectors, and Junction blocks to Conform to a category
Category Maximum data rate CAT 1 Less than 1 Mbps Usual application analog voice (plain old telephone service) Integrated Services Digital Network Basic Rate Interface in ISDN Doorbell wiring

CAT 2
CAT 3 CAT 4

4 Mbps
16 Mbps 20 Mbps

Mainly used in the IBM Cabling System for token ring networks
Voice and data on 10BASE-T Ethernet (certify 16Mhz signal) Used in 16Mbps Token Ring Otherwise not used much

CAT 5

100 Mbps

100 Mbps 155 Mbps asynchronous transfer mode (certify 100 Mhz signal)

LECTURE TWO

Figure hybrid topology: a star backbone with three bus networks

Network Hardware

Hubs
A hub is the place where data converges from one or more directions and is forwarded out in one or more directions. Seen in local area networks

Gateways
A gateway is a network point that acts as an entrance to another network. On the internet, in terms of routing, the network consists of gateway nodes and host nodes. Host nodes are computer of network users and the computers that serve contents (such as Web pages). Gateway nodes are computers that control traffic within your companys network or at your local internet service provider (ISP)

Routers
A router is a device or a software in a computer that determines the next network point to which a packet should be forwarded toward its destination. Allow different networks to communicate with each other A router creates and maintain a table of the available routes and their conditions and uses this information along with distance and cost algorithms to determine the best route for a given packet. A packet will travel through a number of network points with routers before arriving at its destination.

Bridge
a bridge is a product that connects a local area network (LAN) to another local area network that uses the same protocol (for example, Ethernet or token ring). A bridge examines each message on a LAN, "passing" those known to be within the same LAN, and forwarding those known to be on the other interconnected LAN (or LANs).

What is the difference between?

Bridge: device to interconnect two LANs that use the SAME logical link control protocol but may use different medium access control protocols. Router: device to interconnect SIMILAR networks, e.g. similar protocols and workstations and servers Gateway: device to interconnect DISSIMILAR protocols and servers, and IBM LANs and equipment.

Switches
Allow different nodes of a network to communicate directly with each other. Allow several users to send information over a network at the same time without slowing each other down.

WANs and LANs

Major Categories of Networks

Local Area Networks (LAN)
A network of computers that are in the same general physical location, within a building or a campus.

Metropolitan Area Networks (MAN) Wide Area Networks (WAN)

Issues of size and breadth.

Data Communications Through WANs (1)

WANs were developed to communicate over a large geographical area (e.g. lab-to-lab; city-to-city; east coast-towest coast; North America-to-South America etc) it provides long distance transmission of data ,image,audio and video information over large distance. WANs require the crossing of public right of ways (under control and regulations of the interstate commerce and institute of telephone and data communications established by the govt and international treaties). WANs around the world relies on the infrastructure established by the telephone companies (common carrier) or public switched telephone network (PSTN)..

Data Communications Through WANs (2)

Recently, frame relay and asynchronous transfer mode (ATM) networks have been implemented to achieve higher operating and processing speeds for the message. Interconnected devices, I.e. LANs or Personal Computers (PC) or Workstation or Servers can be (usually are) privately owned by companies. WANs consists of a number of interconnected switching nodes (today = computers). Transmission signals are routed across the network automatically by software control to the specified destination. The purpose of these nodes are to route messages through switching facilities to move data from node to node to its destination

WANs: a switched WAN and a point-to-point WAN

1.41

Local Area Network

Small interconnected of personal computers or workstations and printers within a building or small area up to 10 Kms. Small group of workers that share common application programs and communication needs. LANs are capable of very high transmission rates (100s Mb/s to10 G b/s). LAN equipment usually owned by organization. Medium may be owned or leased from telephone company provider or common carrier. PC or Workstation interconnected to medium (twisted pair; fiber optics; etc) through concentrators to servers. LAN is interconnected with other networks via switches and router/gateways. Advanced LANs using circuit switching are available. ATM LANs, fibre channel baseband, and broadband LANs are being used. Etc.

An isolated LAN connecting 12 computers to a hub in a closet

Circuit Switching Technologies

Circuit switching is a dedicated communications path established between two stations or multiple end points through nodes of the WAN Transmission path is a connected sequence of physical link between nodes. On each link, a logical channel is dedicated to the connection. Data generated by the source station are transmitted along dedicated path as rapidly as possible. At each node, incoming data are routed or switched to the appropriate outgoing channel without excessive delay. However, if data processing is required, some delay is experienced. Example of circuit switching above is the telephone networks.

Packet Switching Technologies

It is not necessary (as in circuit switching) to dedicate transmission capacity along a path through the WAN rather data are sent out in a sequence of small chucks, called packets. Each packet, consisting of several bits is passed through the network from node to node along some path leading from the source to the destination. At each node along the path, the entire packet is received, stored briefly, and then transmitted to the next node. At destination all individual packets are assembled together to form the complete text and message from the source. Each packet is identified as to its place in the overall text for reassembly. Packet switching networks are commonly used for terminal-tocomputer and computer-to-computer communications. If packet errors occur, the packet is retransmitted.

Frame Relay Techniques

Packet switching was developed at a time (1960s) when digital long distance transmission facilities exhibited a relatively high error rate compared to todays facilities. A large amount of overhead was included for error detection and control. Each packet included additional bits and each node performed additional processing to insure reliable transmission. Frame relay has removed the overhead bits and additional processing. It has become unnecessary to invoke these overhead checks and thereby enables higher capacity transmission rates. Frame relay takes advantage of these high rates and low error rates. Frame relay networks are designed to operate efficiently at user data rates of 2 Mb/s and higher. (packet switching originally designed with a 64 Kb/s data rate to the end user). Frame relay achieves these higher rates by stripping out most of the overhead involved with error control.

Asynchronous Transfer Mode (ATM)

ATM also referred to as Cell Relay Evolution from frame relay and circuit switching. Major differences: Frame relay uses variable length packets called frames. ATM uses fixed length packets called cells. ATM provides little overhead for error control like frame relay, and depends on inherent reliability of the transmission system and on higher layers of logic in the end systems to identify and correct errors. ATM is designed to operate in range of 10s to 100 Mb/s compared to frame relay (2 Mb/s) ATM allows multiple virtual channels with higher data rates for transmission paths. Each channel dynamically sets on demand.

ISDN and Broadband ISDN Technology

Integrated services digital network (ISDN) was intended to be a world wide public telecommunication network to replace existing public telecommunication networks and deliver a wide variety of services. ISDN has standardized user interfaces, implemented a set of digital switches and paths supporting a broad range of traffic types and providing a value added processing service ISDN is multiple networks, but integrated to provide user with single, uniform accessibility and world wide interconnection. First generation ISDN was narrowband, 64 Kb/s channel of switching and circuit switching orientations. Frame relay resulted from the ISDN narrowband efforts. Second generation is broadband ISDN. It supports high data rates of 100s Mb/s and has a packet switching orientation. ATM resulted from the broadband ISDN efforts.

What is ethernet?
A group of standards for defining a local area network that includes standards in cabling and the structure of the data sent over those cables as well as the hardware that connects those cables. Independent of the network architecture IEEE 802.3 Ethernet Specification
Great detail specifying cable types, data formats, and procedures for transferring that data through those cables

IEEE 802.5 Token Ring Specification

Network Interface Card (NIC)

Every computer and most devices (e.g. a network printer) is connected to network through an NIC. In most desktop computers, this is an Ethernet card (10 or 100 Mbps) that is plugged into a slot on the computer motherboard.

How does Ethernet work?

Using Media access control (MAC) addresses to distinguish between machines, Ethernet transmits frames of data across baseband cables using (IEEE 802.3)

What is a MAC Address?

Media Access Control (MAC) Address are the physical address of any device, e.g. a NIC in a computer on the network. The MAC address has two parts of 3 bytes long. The first 3 bytes specify the company that made the NIC and the second 3 bytes are the serial number of the NIC.

What is a Token Ring?

All computers are connected in a ring or star topology and a binary digit or token passing scheme is used in order to prevent the collision of data between two computers that want to send messages at the same time.

How do Token Rings work?

1. Empty information frames are continuously circulated on the ring. 2. When a computer has a message to send, it inserts a token in an empty frame (this may consist of simply changing a 0 to a 1 in the token bit part of the frame) and inserts a message and a destination identifier in the frame. 3. The frame is then examined by each successive workstation. If the workstation sees that it is the destination for the message, it copies the message from the frame and changes the token back to 0. 4. When the frame gets back to the originator, it sees that the token has been changed to 0 and that the message has been copied and received. It removes the message from the frame. 5. The frame continues to circulate as an "empty" frame, ready to be taken by a workstation when it has a message to send.

Understanding Network Protocols

Protocols of Computer Communications and Networks

Protocol are used for communication between computers in different computer networks. Protocol achieves:
What is communicated between computers? How it is communicated? When it is communicated? What conformance (bit sequence) between computers?

Key elements of a protocol are:

SYNTAX: Data format and signal levels order in which they are presented. SEMANTICS: Control information for coordination and error handling and how a particular pattern to be interpreted TIMING: Synchronization, speed matching, and sequencing.

Examples of protocols:
WAN Protocol: TCP/IP LAN Protocol: Media Access Control; Contention; Token Passing

STANDARDS
Standards are essential in creating and maintaining an open and competitive market for equipment manufacturing. Standards provide guidelines to manufactures,vendors,government agencies.

ISO/OSI Reference Model (1)

Open Systems Interconnection No one really uses this in the real world. A reference model so others can develop detailed interfaces. Value: The reference model defines 7 layers of functions that take place at each end of communication and with each layer adding its own set of special related functions. Flow of data through each layer at one

ISO/OSI Reference Model (2)

File Transfer, Email, Remote Login ASCII Text, Sound (syntax layer) Establish/manage connection End-to-end control & error checking (ensure complete data transfer): TCP Routing and Forwarding Address: IP Two party communication: Ethernet How to transmit signal; coding Hardware means of sending and receiving data on a carrier

What is TCP/IP?
Transmission Control Protocol (TCP) uses a set of rules to exchange messages with other Internet points at the information packet level Internet Protocol (IP) uses a set of rules to send and receive messages at the Internet address level Is the predominate network protocol in use today (Other includes OSI Model) for interoperable architecture and the internet. TCP/IP is a result of protocol research and development conducted on experimental packet switched network by ARPANET funded by the defense advanced research projects agency (DARPA). TCP/IP used as internet standards by the internet architecture board (IAB).

HTTP / FTP / Telnet / SMTP / SLIP / PPP

TCP/IP Five Independent Levels

Application Layer: contains the logic needed to support the various user applications. Separate required for each application. IP handles actual Host-to-host or transport Layer: collection of delivery of packets mechanisms in a single and common layer Internet Layer: IP provides the routing functions across the multiple networks Network access layer: concerned with access to and routing data across a network for two end systems attached to the same network. Physical Layer: covers physical interface between PC
TCP keep track of the individual packets And reassemble are module

TCP (example)
Web Server: serves HTML pages TCP layer in the server divides the file into one or more packets, numbers the packet, then forward packets individually to IP. Note: each packet has the same destination IP address, it may get routed differently through the network. TCP (on the client) reassembles the individual packets and waits until they have arrived to forward them as a single file.

IP
Connectionless protocol (I.e. no established connection between the end points that are communicating.) Responsible for delivery the independently treated packet !!!! TCP responsible for reassembly.

Associated TCP/IP Protocols & Services

HTTP This protocol, the core of the World Wide Web, facilitates retrieval and transfer of hypertext (mixed media) documents. Stands for the HyperText Transfer protocol A remote terminal emulation protocol that enables clients to log on to remote hosts on the network. Used to remotely manage network devices. Stands for the Simple Network Management Protocol. Provides meaningful names like achilles.mycorp.com for computers to replace numerical addresses like 123.45.67.89. Stands for the Domain Name System. SLIP (Serial Line Internet Protocol) and PPP (Point to Point Protocol) encapsulate the IP packets so that they can be sent over a dial up phone connection to an access providers modem. Telnet SNMP DNS

SLIP/ PPP

Considerations?

Examples
Multimedia (audio/video stream) Bioinformatics Educational CDs as an example of extending network capacity

Further Readings
Basics: Complete Idiots Guide to Networking, 3rd Edition (Wagner and Negus) Practical Network Cabling (Freed and Derfler) Networking books by William Stallings:
Business Data Communications Operating Systems: Internals and Design Principles Data & Computer Communications Local and Metropolitan Area Networks High-speed networks TCP/IP and ATM Design Principles

Online Audio/Video Recording of Networking Class: