0% found this document useful (0 votes)
2K views11 pages

TW Detc

This document provides technical specifications for the components of an 8-wheeler diesel electric tower car (DETC) used for inspecting and maintaining overhead traction equipment on rail lines. The DETC is powered by a 700HP diesel engine and uses a traction alternator, rectifier, and 4 traction motors to move. It also includes an auxiliary alternator, batteries, lifting platform, and maintenance schedules for regular upkeep of the vehicle's systems.

Uploaded by

SCRIBEDUSR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
2K views11 pages

TW Detc

This document provides technical specifications for the components of an 8-wheeler diesel electric tower car (DETC) used for inspecting and maintaining overhead traction equipment on rail lines. The DETC is powered by a 700HP diesel engine and uses a traction alternator, rectifier, and 4 traction motors to move. It also includes an auxiliary alternator, batteries, lifting platform, and maintenance schedules for regular upkeep of the vehicle's systems.

Uploaded by

SCRIBEDUSR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 11

TOWER WAGON DETC

Introduction
• 8 Wheeler Diesel Electric Tower Car (DETC) is
self- propelled 4 axle bidirectional vehicle with
driving cabins at both ends. It is meant for
periodical inspection, patrolling and
maintenance of traction over head
equipments, attending to sites of break-
downs, restoration of damaged OHE
equipments etc.
DIESEL ENGINE
• Technical Specifications
1. Make M/s Kirloskar Cummins
2. Type VTA-1710L, Turbo charged, water
cooled, roof mounted radiators, electrical
starting motor, battery charging alternator etc.
3. Rating 700 HP/515 kW at 1800 RPM
continuous.
TRACTION ALTERNATOR
• 1. Make & Type - M/s Crompton Greaves Ltd. Type – C1002TA, M/s BHEL Bhopal TA
7006
• 2. Classification nos. of phase & connections - 8 pole , 3- phase, star connection,
650V
• 3. Rating i. Continuous ii. One hour rating - 600V, 720A, 1800 rpm 320V, 1420A, 1800
rpm
• 4. Max. voltage AC - 468V at 558 Amp. AC
• 5. D.C. (rectified) - 620V at 720amps.
• 6. Max. current A.C. - 1762A at 26 V
• 7. DC (rectified) - 2380 amps. At 35V
• 8. Class and type of insulation i. Stator ii. Rotor - Class H Class H
• 9. Resistance at 15°C Rotor winding Stator winding - 0.90000 ohms 0.001429 ohms
• 10. Details of bearing Single Grease type Capacity Interval for regreasing - Ball
bearing Servogem RR3 of IOC 250gms one year
• 11. Rotor bearing - Ball, FAG 6317 C/3
POWER RECTIFIER
• Technical Specifications
• 1. Make - - M/s Hind rectifiers Ltd. Mumbai. M/s. USHA (INDIA) Ltd. Delhi.
M/s BHEL – Bhopal
• 2. Configuration - Three phase bridge 3. AC Voltage - 481 V Line to Line, 3
phase.
• 4. Power frequency - 47.5 Hz to 120 Hz.
• 5. Out put DC Voltage - 650 Volt.
• 6. Continuous output DC currents - 1500 amps.
• 7. Starting current (1 minute) - 2400 amps.
• 8. Max. working ambient temperature - 47 deg C
• 9. Cooling scheme - Forced air cooling using axial blower driven by 110 volt
as DC motor.
• 10. Battery voltage for the blower motor of the rectified units. - 110V DC
(Nominal)
TRACTION MOTOR
• 1. Make, Model, Type: (i) M/s Crompton Greaves, Model – 2141A, Type (ii)
M/s BHEL Bhopal, Model -4601 BZ., Type Self ventilated Lapwound
armature.
• 2. Number of pole 4 pole
• 3. Insulation winding Class H
• 4. Continuous rating 204 kW,600V,340A, 1520 rpm.,100% Field Strength
• 5. No of motor Per DETC 4 permanently in parallel.
• 6. Weight(Approx)
• 7. Motor along with axle caps sleeve bearings (i) Armature (ii) Pinion
1910kgs. 600kgs. 20kgs.
• 8. Resistance value At 20°C At 115°C i. Armature winding 0.0114 ohms ± 5%
0.0156 ohms ± 5% ii. Series field winding 0.0128 ohms ± 5% 0.0176 ohms ±
5% iii. Commutating pole winding 0.0084 ohms ± 5% 0.0115 ohms ± 5%
AUXILIARY ALTERNATOR
• 1. Make M/s. KEL
• 2. Mounting Foot mounting
• 3. Power 12 kW
• 4. Voltage 120V DC
• 5. Voltage regulator ± 5%
• 6. Cut in speed 500 rpm
• 7. Drive C section, V belt drive
• 8. Current 93A
• 9. Insulation Class F
• 10. Cooling Forced (Fan)
• 11. Weight of alternator 445 kg (approx.)
• 12. Weight of rectifier regulator 60kg (approx.)
• 13. Maximum speed 2500 rpm
HYDRAULIC TELESCOPIC LIFTING AND
SWIVELING PLATFORM
• Technical Specifications
• 1. Lifting capacity - 0.5 ton uniformly distributed
• 2. Total collapsed height of platform from coach floor - 2955 mm
• 3. Max. platform height from coach floor - 4955 mm
• 4. Height of collapsible railings - 800 mm
• 5. Working platform size - 5700 mm (L) x 1500mm (B)
• 6. Maximum overhang from center line - 4200 mm
• 7. Rotation of platform - ± 90°
• 8. Motor for swiveling - 0.75 kW/ 1HP, 690 rpm, 3 phase, 50Hz, 415V
• 9. Lifting time to max. height - 45 sec.
• 10. Swivel time for 0° to ±90° - 36 sec.
• 11. Lifting boom arrangement - 2 stage telescopic
BATTERY
• Starter Battery
Type Mono-block, lead acid battery
Voltage 24 volts (3 x 8)
Capacity 290 AH (5HR discharge at 70°)
• Control Supply Battery
Type Mono-block
Voltage 110 volts (18 x 6)
Capacity 120 AH (10HR discharge at 27°)
DG SET
7.5 KVA DG set
2 kVA DG set
MAINTENANCE SCHEDULES
• DIESEL ENGINE
• TRACTION ALTERNATOR
• POWER RECTIFIER
• TRACTION MOTOR
• AUXILIARY ALTERNATOR
• HYDRAULIC TELESCOPIC LIFTING AND SWIVELING
PLATFORM
• BATTERY
• SCHEDULES FOR CAR BODY, UNDER FRAME, BOGIES, BRAKE
RIGGING ETC.

You might also like