Scribd
Upload
270 views10 pages

Industrial Training Presentation BY Vaibhav Singh (Mechanical Engineering)

MODERN INFRA PROECTS is a manufacturing company established in 2023 with 50-75 employees and an annual turnover of 1.5-2 crore. The company produces industrial structures, equipment, and modular warehouses across its 15,000 square meter facility. Products are tested using various machines for physical, chemical, and non-destructive testing. Training provides learning on manufacturing standards, materials, cutting processes, and machine operation. The company utilizes waste resources sustainably and focuses on safety, environment, and managing human resources for long term stability.

Uploaded by

Vaibhav Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
270 views10 pages

Industrial Training Presentation BY Vaibhav Singh (Mechanical Engineering)

MODERN INFRA PROECTS is a manufacturing company established in 2023 with 50-75 employees and an annual turnover of 1.5-2 crore. The company produces industrial structures, equipment, and modular warehouses across its 15,000 square meter facility. Products are tested using various machines for physical, chemical, and non-destructive testing. Training provides learning on manufacturing standards, materials, cutting processes, and machine operation. The company utilizes waste resources sustainably and focuses on safety, environment, and managing human resources for long term stability.

Uploaded by

Vaibhav Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd

MODERN INFRA PROECTS

INDUSTRIAL TRAINING PRESENTATION


BY
VAIBHAV SINGH
(MECHANICAL ENGINEERING)
CONTENTS
INTRODUCTION
 History
 Manufacturing Infrastructure
PRODUCTS MANUFACTURED
MACHINES
TESTING
LEARNING OUTCOMES
CONCLUSION
INTRODUCTION
HISTORY
 Year of Established:2023
 Owner of Company(Mr. Vipin Kumar)
 Established for Manufacture of equipment like Warehouse Sheds, Portable
Cabin, Factory Sheds Fabrication Services, Mild Steel ndustrial Shed Fabrication
Service etc.
 There are 50-75 employes in the company.
 Annual Turnover of Company is 1.5-2 Crore.
MANUFACTURING
INFRASTRUCTRE
2. INSTALLED MANUFACTURING CAPACITY
1. TOTAL AREA OF WORKS(ALL UNITS)
(PER ANNUM)
Covered sheds with EOT Cranes & = 3000 Sqm Cast Iron Castings = 1000 MT
Concrets floors

Open Area with mobile cranes = 6000 Sqm Technological Structures = 1200 MT

Open area with concrete floor & = 4000 Sqm


Gantry Crane
Building Structures = 1260 MT

Offices, Canteen,Stores,etc = 2000 Sqm Equipment = 1200 MT

TOTAL = 15000 Sqm


PRODUCTS
MANUFACTURED
FABRICATION SERVICE

Mild Steel Industrial Sheds Modular Industrial Warehouse


TESTING
 Physical Testing
 Universal testing machine
 Brinell hardness tester
 Charpy tester
 Chemical testing
 Sand testing
 Compressive and tensile test
 Permeability test
 NDT(Non destructive testing)
 Radiography (X-ray)
 Ultrasonic testing
 Magnetic particle testing machine
 Die penetrant test
LEARNING
OUTCOMES
 Learned about the standards and its necessity. Also learned that the nameof
a material denotes something about it for example material like
S335j0Cu641210 which tells that S means material is structure type and
335 gives its tensile strength JO gives the detail that it is tested in 0°C and
Cu denotes cupper based and last denotes the standard followed by it.
 Learned about the different gases used for different material for cutting
like for stainless steel nitrogen and air is used while for mild steel oxygen
and LPGis used.
 Learned about the command for manual control over the path movement
for critical path or for interval based check by the command MDI(Manual
data input).
 Lubrication is not used for cast iron and the reason behind it is the
brittleness and hardness of cast iron make the chip like dust which can
choke the system if mixed with lubrication forming a muddy mixture.
CONCLUSION
The MODERN INFRA PROJECTS is a well know Company manufacturing
equipments of different industries.
The Company is utilizing its waste resources for the development of the
industry and taking care of the safety and environment.
High technology is introduced and is a Company for producing avariety of
products. The profit of an organization entirely depends on the way the top
chairs manage the resources the organization has. Whatever the other
aspects may be, it was seen that managing human resource was extremely
difficult. The stability or the sustainability of the organization mostly
depends on this factor.
In most cases it could be seen that there exists easier or better ways to do
something.
Adopting new methods provide efficient use of resources and can enhance the
effectiveness of the work.

You might also like