MATADOR EXCAVATOR
ME220 Monitor’s operation
&
Engine R.P.M Calibration
Preparing By – Tint San Oo
Position – Service Head
( CE-3 Service)
Sharing Course……
- Monitor’s operation
- Operation Information
- Port Information
- Machine Information
- User Setting
- System Setting
- Fault Information
- History Fault Record
- Throttle Demarcate
- Loading Counter
- Engine R.P.M Calibration
Multi Function Monitor System
Low Fuel Air Filter Clog
Charging
High Temperature
Preheating Engine Oil Pressure Warning Lamp
Fuel Level Working Hour
Cooling Water Temperature
Date & Time Failure code
Auto Idle
Function Keys
MODE (L,S,H)
How to read monitor functions……
You will press F2 Key to see monitor’s
functions(operation).
After Press F2 After you press F2 Key, monitor will
change to next page.
Operation Information
• You can press F2 and F3 keys ( )
to select functions.
Cannot
• If you want to go previous page,Show
will press F1 key ( ).
• And also you want to know any
Press Enter
information, press Enter or F5 key
( ).
Port Information
High R.P.M Condition and after a few
High R.P.M Condition and early
second while R.C.V operating
(firstly) touch R.C.V
Idle condition
Press Enter or F5
To previous page To next page
Machine Information
Press Enter or
F5
If you want to buy or order Monitor
or Controller, you should see ( )
Versions.
User Setting
Number UP
Date And Time Language Setting
Number DOWN
Next Number
Monitor Setting Maintenance
Interval Setting
Press Enter or
F5
User’s Password
Setting
Stage Hour Management
Date And Time Language Setting Monitor Setting
To change new password
Maintenance User’s Password Stage Hour
Interval Setting Setting Management
System Setting
Monitor Information Setting
Control Parameter Setting
Assistance Selection Setting After choice
Press Enter or
Engineer Setting F5 or someone
If you use breaker
function, You will choose
GPS Unlocking Assistance Selection Setting.
GPS Cancelling
GPS Emergency Unlocking
Fault Information
IF have some errors, red lamp is
flash and flash in status.
If Press
pressEnter or will
f4 key,
F5
change to next page.
History Fault Record
AfterPress
pressEnter
F3 or
F5 key Fault
(Next F5
(Delete)
Page) Times
When you press F5 key, it will delete all
records.
To delete Fault
Next Page Searching
Record
Throttle Demarcate
Number UP
Number DOWN
Next Number
After press F5 key,
Press Enter or
these page F5 will
appear.
After you input the password,
press again F5 Key.
You can calibrate the engine R.P.M at
these page.
Loading Counter
You will
Press press
Enter or F5
key toF5 start.
After you start Loading Counter,
you will see it.
Engine R.P.M Calibration
If you want to calibrate the
engine R.P.M, you must do at
least two times for Idle and
High speed.
Operation mode is Standard
Mode.
F2 key is use for Idle
calibrating.
F3 key is use for High
calibrating.
F4 Key is Calibrating.
For Idle Calibration
1
e
10 Calibrating Photo
Fre
Firstly, must be put on dial gauge from free to
1st position.
And will press along F2 key.
If you pressing F2 key, Min; dial will change
between 1300 and 1500.
When it changed to some amount, leave F2
key.
After changed Min; dial amount, Will press F4
key to calibrate the engine for Idle.
For High Calibration
10
1 Calibrating Condition Photo
Fr
ee
Firstly, must be put on dial gauge from free to
10th position.
And will press along F3 key.
If you pressing F3 key, Max; dial will change
between 2400 and 2700.
When it changed to some amount, leave F3
key.
After changed Min; dial amount, Will press F4
key to calibrate the engine for High speed.
Do you have any
Question?
