CAMELLIA INSTITUTION OF TECHNOLOGY
1
NAME : SUBHAJIT DAS
ROLL NO: 23000721066
TOPIC: PSYCHOMETRIC PROCESS IN AIR CONDITION.
SUBJECT NAME: REFRIGERATION & AIR CONDITION
SUBJECT CODE: PEME-601B
SEM: 6TH
CLASS: 3RD YEAR
2 OUTLINE
1. Psychrometrics
2. Psychrometric Charts
3. Advantages and uses of the chart
4. How to read a psychrometric chart
5. Psychrometric properties
6. Psychrometric Processes
7. Conclusion
3 1. PSYCHROMETRICS
• Definition: This a term used to describe the field of engineering concerned
with the determination of the physical and thermodynamic properties of gas-
vapor mixtures.
• The term is derived from the greek “Psuchron” meaning “cold”
And “Metron” meaning “means of measurement”.
PSYCHROMETRIC CHARTS
4
• This is simply a graphical means of representing the thermodynamics properties of
moist air at constant pressure mostly at sea level.
• Below is an ASHRAE style psychrometric chart.
5 ADVANTAGES AND USES OF THE CHART
1. If all the values are calculated manually using the formula, it takes lots
of time, but with a psychrometric chart these values can be found within
seconds or minutes.
2. With psychrometric chart we can easily find out the present and the
final condition of the air. Say if the air is cooled from 100F to 75°F, all we
have to do is to draw the horizontal line to locate the initial and final
condition of the air.
3. A psychrometric chart is very useful in carrying out heat load or
cooling load calculations.
6 HOW TO READ A PSYCHROMETRIC CHART
Lets take for example we were given the values of dry bulb and wet bulb
temperature which are 78°F and 65°F respectively. We will find out the values of
other psychrometric properties using these two given properties.
i. On the psych chart locate the value 78°F on the dry bulb temperature scale
located at the bottom of the chart .
ii. Locate the wet bulb temperature of 65°F on the saturation curve scale.
iii. Extend the vertical line which is the dry bulb temperature form 78°F and the
diagonal wet bulb line form 65°F and get the point of intersection
iv. Find out the values of various parameters at this point.
7 PSYCHROMETRIC PROPERTIES
1. Dry bulb temperature
2. Wet bulb temperature
3. Dew point temperature
4. Relative humidity
5. Humidity ratio
6. Specific volume
7. Enthalpy
8 1. DRY BULB TEMPERATURE
This is the temperature indicated by a thermometer exposed to the air in
a place sheltered from direct solar radiation.
The term dry bulb is customarily added to temperature to distinguish it
from wet bulb and dew point temperature.
The dry bulb temperature is measured in degree Celsius/F. And denoted
with a straight vertical line on the psych chart .
9 2. WET BULB TEMPERATURE
The wet bulb temperature is the temperature recorded by a thermometer
when the bulb is enveloped by a cotton wick saturated with water.
The accuracy of a simple wet bulb thermometer depends on how fast air
passes over the bulb and how well the thermometer is shielded from the
radiant temperature of its surroundings.
The wet bulb temperature is also measured in degree celsius and denoted
by a straight diagonal lines on the psych chart .
10 3. DEW POINT TEMPERATURE
• The temperature at which moisture starts to condense out of air is
called dew point.
• Dew point is also known a saturation temperature.
• Dew point temperature is determined by moving from a state point
horizontally to the left along lines of constant humidity ratio until the
upper, curved, saturation boundary temperature is reached.
11
12 RELATIVE HUMIDITY
• Relative humidity (RH) is the ratio of the partial pressure of water vapor to the
equilibrium vapor pressure of water at a given temperature. Relative humidity depends on
temperature and the pressure of the system of interest. It requires less water vapor to attain
high relative humidity at low temperatures; more water vapor is required to attain high relative
humidity in warm or hot air.
• Relative humidity is dimensionless, and is usually expressed as a percentage. 100% RH indicates
the air is saturated and cannot hold any more moisture. Preferred values of comfort for people
are between 35% and 60%.
• Lines of constant relative humidity are shown as exponential lines on the psychrometric chart
• RH%= Amount of moisture that a given amount of air is holding
Amount of moisture that a given amount of air can hold
13 HUMIDITY RATIO
• Actual weight of water in an air to water vapor mixture
• Amount of moisture per unit of dry air
• Can be defined as W=m/G
• It is dimensionless
14 6. SPECIFIC VOLUME
• In thermodynamics, the specific volume of a substance is the ratio of
the substance's volume to its mass. It is the reciprocal of density and an
intrinsic property of matter as well. Specific volume is defined as the
number of cubic meters occupied by one kilogram of a particular
substance. The standard unit is the cubic meter per kilogram.
• Specific volume for an ideal gas is also equal to the gas constant (R)
multiplied by the temperature and then divided by the pressure
multiplied by molar mass of that ideal gas.
• This is shown as diagonal lines on the chart.
15 7. ENTHALPY
• Enthalpy is usually designated as h. It is the total amount of heat
energy of the moist air and therefore includes the amount of heat of
the dry air and water vapor in the air. In the approximation of ideal
gasses, lines of constant enthalpy are parallel to lines of constant wet
bulb temperature. Thus the enthalpy is indicated by diagonal lines on
the chart.
16 PSYCHROMETRIC PROCESSES
1. Sensible cooling of air
2. Sensible heating of air
3. Humidification
a. Cooling and humidification
b. Heating and humidification
4. Dehumidification
c. Cooling and dehumidification
d. Heating and dehumidification
5. Adiabatic mixing of two moist air streams.
17 2. SENSIBLE HEATING
• It is the addition of heat to moist air without addition of moisture.
• It follows a constant humidity ratio line on the psych chart.
18 3. HUMIDIFICATION
• This is the addition of moisture to moist air without the addition or
removal of heat.
19 3A. COOLING AND HUMIDIFICATION
• In this process the moisture is added to the air by passing it over the
stream or spray of water which is at temperature lower than the dry
bulb temperature of the air.
20 3B. HEATING AND HUMIDIFICATION
• It is the addition of heat and moisture to moist air, it also involves
sensible and latent heat transfer.
21 4. DEHUMIDIFICATION
• It is the removal of moisture from moist air without removing heat.
22 4A. COOLING AND DEHUMIDIFICATION
• This is the removal heat and moisture from air, it also involves sensible
and latent heat transfer.
23 4B. HEATING AND DEHUMIDIFICATION
• It is the addition of heat and removal of moisture from moist air.
24 5. ADIABATIC MIXING OF MOIST AIR STREAMS
• First adiabatic or evaporative cooling is a psych process which involves
the cooling without heat loss or gain.
• Sensible heat loss by air is converted to latent heat in the added water
vapor.
• Adiabatic mixing of moist air streams is a psych process that involves
no net heat loss or gain during the mixing of two air streams.
25
26 CONCLUSION
• This aspect of psychrometrics is very important when it comes to analyzing
indoor conditions as temperatures and humidity levels within our environments
are very dynamic. In air-conditioning applications the knowledge of
psychrometrics is essential to design the system for optimal thermal comfort.
Thermal comfort is that condition of mind that expresses satisfaction with the
thermal environment.
• A solid understanding of psychrometrics can prevent costly mistakes in the
design and operation of commercial, residential, industrial cooling,
dehumidification, drying and humidification systems.
27
