Scribd
Upload
2 views57 pages

AGS-20 Web LCT

The document outlines the configuration options for the AGS-20 Web LCT, including various link types such as 1+1 Hot Standby and 2+0 XPIC. It details the mandatory fields for link names and the selection of radio configurations, as well as settings for modulation schemes and Ethernet port management. Additionally, it covers synchronization settings and various baseband configurations.

Uploaded by

Maged Makram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
2 views57 pages

AGS-20 Web LCT

The document outlines the configuration options for the AGS-20 Web LCT, including various link types such as 1+1 Hot Standby and 2+0 XPIC. It details the mandatory fields for link names and the selection of radio configurations, as well as settings for modulation schemes and Ethernet port management. Additionally, it covers synchronization settings and various baseband configurations.

Uploaded by

Maged Makram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 57

AGS-20 Web LCT

Main Menu
No Radio Configuration
Create New Link -> Next
Available Radio Configuration
Select link Type -> 1+1 HS
Link Name : is Mandatory Field
Mark on Check Box ODU A & ODU B
1+1 Hot Standby (HS)
Select link Type -> 1+1 FD
Link Name : is Mandatory Field
Mark on Check Box ODU A & ODU B
1+1 Frequency Diversity
Select link Type -> 1+0
Link Name : is Mandatory Field “Link 1”
Mark on Check Box ODU A
1+0
Select link Type -> 1+0
Link Name : is Mandatory Field “Link 2”
Mark on Check Box ODU B
2 x (1+0)
Select link Type -> 2+0 XPIC
Link Name : is Mandatory Field
Mark on Check Box ODU A & ODU B
2+0 XPIC
Select Operation : Manage Aggregation ->
Next
Aggregate ODU B to Port ODU A -> Done
Available Modulation Scheme / Ch. BW
Equipment -> BW & Mod. -> Channel BW
Equipment -> BW & Mod. -> Mod. Scheme
Equipment -> BW & Mod. -> Profile Management:
ACM Engine : Enable
Note : 2048 QAM Modulation is not supported in High
Gain Profile Management
Equipment >> General Preset
Radio -> Radio Branch
Base Band >> Ethernet >> Bridge Mode Conf.
Base Band >> Ethernet >> Port Manager >>
Physical Interfce
Base Band >> Ethernet >> Port Manager >> Optical
Base Band >> Ethernet >> Port Manager >>
Data Flow
Base Band >> Ethernet >> Port Manager >>
Traffic Class 802.1p Mapping
Base Band >> Ethernet >> Port Manager >>
LA Status
Base Band >> Ethernet >> Port Manager >>
Tunneling
Base Band >> Ethernet >> VLAN>> Basic
Setting
Base Band >> Ethernet >> VLAN>>
Port Setting
Base Band >> Ethernet >> VLAN>>
Static Vlans
Header Compression
Base Band >> Ethernet >> RSTP :Setting
Base Band >> Ethernet >> RSTP : Port
Setting
Base Band >> Ethernet >> RSTP : Port Status
Base Band >> Ethernet >> LLF
Base Band >> Ethernet >> Queue Depth
Base Band >> Ethernet >> LA Manager >>
General Setting
Base Band >> Ethernet >> LA Manager >>
LAG
Base Band >> Ethernet >> LA Manager >>
LACP
Base Band >> Ethernet >> LA Manager >>
Load Balancing
Base Band >> DCN (LAN 3) >> MNGT Port
Configuration
Base Band >> DCN (LAN 3) >> MNGT Out Of
Band
Base Band >> DCN (LAN 3) >> Routing Table
Base Band >> TDM Tributaries >> E1
Base Band >> Cross Connection >> Add
Synchronization >> General
Synchronization >> T0
Synchronization >> LAN SSM
Synchronization >> 1000 Base-T Role
Synchronization >> SA Bit
Synchronization >> E1 Retiming

You might also like