Osi model 7 Layers

OSI Reference ModelOSI Reference Model
Prepared by
Siddique Ibrahim S P AP/CSE
Kumaraguru college of Technology

2
Objectives
 Data communication among
heterogeneous systems – difficulties and
solutions
 The need for layered architecture
 Design issues for the layers
 The OSI model

3
Network complexities
 Different types of hardware and software
 Different operating systems
 Different types of data to be transferred –
text, images, music, video, etc
 Data must be transferred without errors
 Many different paths may have to be taken

4
Network complexities
 Data formats and data exchange
conventions vary between manufacturers
E.g., ASCII, UNICODE, EBCDIC(Extended
Binary Coded Decimal Interchange Code),
etc.

5
Solution:
 This can be resolved only if computers
follow certain common set of rules or
protocols

6
What is a protocol?
 It is a formal description of message
formats and the rules that two computers
must follow in order to exchange
messages.
 This set of rules describes how data is
transmitted over a network.

7
Why are protocols needed?
 Protocols are needed for communication
between any two devices.
 In what format will the messages be transmitted?
 At what speed should messages be transmitted?
 What to do if errors take place?
 What to do if parts of a message are lost?

8
Protocols in daily life
 How does conversation take place between
human beings
 “Hello”
 “Goodbye”
 Handshake
 Letters
 “Dear Sir”
 “Yours faithfully”
 No splleing mistakes !

9
Network Model
 Network model - A method of describing and
analyzing data communications networks by
breaking the entire set of communications
process into a number of layers.
 Each layer has a specific function

10
Open Systems Interconnect (OSI)
Model
 Who made:
International Standards Organization (ISO)
 A Model of How Protocols and Networking
Components Could be Made
 “Open” means the concepts are non-
proprietary; can be used by anyone.
 OSI is not a protocol. It is a model for
understanding and designing a network
architecture that is flexible and robust.

11
Open Systems Interconnect (OSI)
Model
 The OSI model describes how data flows from one
computer, through a network to another computer
 The OSI model divides the tasks involved with
moving information between networked computers
into 7 smaller, more manageable sub-task .
 A task is then assigned to each of the seven OSI
layers.
 Each layer is reasonably self-contained so that the
tasks assigned to each layer can be implemented
independently.

13
7-layer OSI model
 Why so many layers?
To reduce complexity, networks are organized
as a stack of layers, one below the other.
Each layer performs a specific task. It
provides services to an adjacent layer
This is similar to the concept of a function in
programming languages – function does a
specific task

15
Layered Approach
 The entities comprising the corresponding layers on
different machines are called peers
 It is the peers that communicate by using the protocols
 Actually, data is not transferred from layer n on one
machine to layer n on another machine
 Each layer passes data and control information to the
layer immediately below it, until the lowest layer is
reached
 Actual data communication takes place through the
lowest layer – the physical layer

16
Design Issues for the Layers
 Addressing
 Error control
 Order of messages must be preserved
 Flow control – fast sender and slow receiver !
 Disassembling, transmitting, and reassembling
large messages
 Multiplexing / de-multiplexing
 Routing

 OSI model did not fully implemented.
 TCP/IP was used and tested extensively
in the internet.
17

18
The Layers of the OSI Model
Application
Presentation
Session
Transport
Network
Data Link
Physical

19
The Layers of the OSI Model
Some Mnemonics
Application
Presentation
Session
Transport
Network
Data Link
Physical
All
People
Seem
To
Need
Data
Processing
Please
Do
Not
Tell
Secret
Passwords
Anytime

Physical layer
 Coordinates the functions required to carry
a bit stream over physical medium.
 It deals with a electrical and mechanical
specifications of the interface and
transmission medium(type of medium).
 It responsible for movements of individual
bits from one hop(node) to the next.
23

24
Physical layer
• Specifications for the physical
components of the network.
• Functions of Physical Layer:
• Bit representation – encode bits(0’s and 1’s)
into electrical or optical signals
• Transmission rate – The number of bits sent
each second
• Physical characteristics of transmission
media
• Synchronizing the sender and receiver
clocks(both are not have same bit rate).
• Line Configuration The physical layer is
concerned with the connection of devices to
the media.(point-to-point (or) multipoint)
• Transmission mode – simplex, half-duplex,
full duplex
• Physical Topology – how devices are
connected – ring, star, mesh, bus topology
Application
Presentation
Session
Transport
Network
Data Link
Physical

26
Data Link Layer
Responsible for delivery of data between two
systems on the same network(hop to hop delivery)
Main functions of this layer are:
• Framing – divides the stream of bits
received from network layer into
manageable data units called frames.
• Physical Addressing – Add a header to the
frame to define the physical address of the
source and the destination
machines(MAC).
• Flow control – If the receiver is less than
rate of at which data are produced in the
sender.[The flow control mechanism to
avoid overwhelming the receiver]
Application
Presentation
Session
Transport
Network
Data Link
Physical

31
Data Link Layer
• Error Control – Adds relaibility mechanisms
to detect and retransmit damaged or lost
frames. This is achieved by adding a trailer
to the end of a frame
Also, recognize duplicate frames.
• Access Control –When two (or) more
devices connected to the same link, then
this layer protocol determine which devices
has control over the link at any given time.
Application
Presentation
Session
Transport
Network
Data Link
Physical

34
Network Layer
• Responsible for delivery of packets
across multiple(sou to des delivery)
networks[Note: if two systems are
connected to the same link there is
no need for a n/w layer]
• Logical Addressing:The physical
addressing implemented by the
data link layer handles the
addressing problem locally(MAC)
• When it passes the boundary the n/w
layer adds a header to the packet(IP)
coming from the upper layer(include
logical address of sender and receiver)
Application
Presentation
Session
Transport
Network
Data Link
Physical

35
Network Layer
• Routing – Independent networks
(or) large n/w, the connecting
device(Router or switch)
• Router the packets to the final
destrination.
• Network layer is responsible only
for delivery of individual packets
and it does not recognize any
relationship between those packets.
Application
Presentation
Session
Transport
Network
Data Link
Physical

38
Transport Layer
• Responsible for source-to-
destination delivery of the entire
message.
• Segmentation and reassembly –
divide message into smaller
segments, add sequence number
them and transmit. Reassemble
these messages at the receiving
end.
• Error control – make sure that the
entire message arrives without
errors – else retransmit.
Application
Presentation
Session
Transport
Network
Data Link
Physical

39
Transport Layer
Service point addressing:
Compuer often run several programs at a same
time.
Sou-to-des not only from one computer to next.
The transport layer header must therefore include
a address called service point address[port
address]
Connection control:
Connectionless- Each segment as a individual
& delivery to the destination.
Connection oriented- Fist establish a
connection with the transport layer at the
destination before the packets send.
After all data packets delivered, then the
connection is terminated.
Application
Presentation
Session
Transport
Network
Data Link
Physical

40
Transport Layer
A port is identified for each address and protocol by
a 16-bit number, commonly known as the port
number.
A port number is a 16-bit unsigned integer, thus
ranging from 1 to 65535 (port number 0 is
reserved and can't be used).
Transport Layer protocols, such as the
Transmission Control Protocol (TCP) and the
User Datagram Protocol (UDP), specify a source
and destination port number in their packet
headers.

43
Session Layer
First three layers not sufficient for
some processes.session layer
establishes, maintains and
synchronizes the interaction among
communicating systems.
• Dialog control – allows two systems
to enter into a dialog, keep a track of
whose turn it is to transmit
• Synchronization – adds check points
(synchronization points) into stream
of data.
Application
Presentation
Session
Transport
Network
Data Link
Physical

44
Session Layer
H5
syn syn syn
From Presentation Layer
To Transport Layer
Session Layer
From Transport Layer
To Presentation Layer
H5
syn syn syn
Session Layer

45
Presentation Layer
Responsibilities of this layer are:
• Translation
• Different computers use different
encoding systems (bit order
translation)
• Convert data into a common format
before transmitting.
• Syntax represents info such as
character codes - how many bits to
represent data – 8 or 7 bits
• Compression – reduce number of
bits to be transmitted
Application
Presentation
Session
Transport
Network
Data Link
Physical

46
Presentation Layer
• Encryption – transform data into an
unintelligible format at the sending
end for data security
• Decryption – at the receiving end
Application
Presentation
Session
Transport
Network
Data Link
Physical

47
Application Layer
•Contains protocols that allow the
users to access the network (FTP,
HTTP, SMTP, etc)
• Does not include application
programs such as email, browsers,
word processing applications, etc.
• Protocols contain utilities and
network-based services that support
email via SMTP, Internet access via
HTTP, file transfer via FTP, etc
Application
Presentation
Session
Transport
Network
Data Link
Physical

48
Application Layer
To Presentation Layer From Presentation Layer

49
Summary of Functions of Layers
Application
Presentation
Session
Transport
Network
Data Link
Physical
To allow access to
network resources
To establish, manage
& terminate sessions
To move packets from
source to destination
To transmit bits over
a medium & provide
electrical specs.
To translate, encrypt
and compress data
To provide reliable
end-to-end message
delivery
To organise bits into
frames

 Lyer 1-3-are the network support layer.
 (they deal with the physical aspects of
moving data from one device to another)
 Layer4- links the two subgroups
 Layer 6-7-can be thought of as the user
support layers(Allow interoperability
among unrelated software system)
50

51
References
 “Computer Networks”,
Tanenbaum A (PHI)
 “Data Communications and Networking”,
Forouzan B (TMH)
 “Local Area Networks”,
Keiser (TMH)

Osi model 7 Layers

More Related Content

What's hot (20)

Viewers also liked (7)

Similar to Osi model 7 Layers (20)

More from Siddique Ibrahim (20)

Recently uploaded (20)

Osi model 7 Layers

Editor's Notes