15 dress-pretty-project-womens-e book

15 Sewing Patterns for Women’s Dresses & Other Pretty Projects
Copyright 2013 by Prime Publishing LLC
All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or by any information storage or retrieval
system, without written permission from the publisher, except in the case of brief quotations embodied
in critical articles and reviews.
Trademarks are property of their respective holders. When used, trademarks are for the benefit of the
trademark owner only.
Published by Prime Publishing LLC, 3400 Dundee Road, Northbrook, IL 60062 – www.primecp.com
Free Sewing Projects
Free Crochet Projects Free Knitting Projects Free Craft Projects
Free Sewing Projects Free Quilt Projects Free Beaded Jewelry Projects
Free Holiday Projects Free Christmas Projects
Free Crochet Afghan Projects
Free Paper Craft Projects Free DIY Wedding Projects

Women’s Dresses & Other Pretty Projects
Find thousands of free sewing patterns, tips, tutorials and more at www.AllFreeSewing.com. 3
Letter from the Editors
Hi Sewists,
While we recognize that anyone (male or female) can be a sewist, every now and then we like to focus
on lovely patterns made specifically for women. Why? There’s something about a special handmade
dress that we know our readers adore. And we can’t blame you! With the help of some of our talented
designer friends, we’ve put together a collection of dresses and other lovely projects we know you’ll
enjoy making. From outfits perfect for spring parties, to home décor inspired by the things you’ve seen
in stores, explore this free eBook full of fresh ideas.
Happy Sewing!
You can find additional wardrobe projects, home décor ideas and more at www.AllFreeSewing.com.
Our eBooks, like all our sewing projects, are absolutely FREE to members of our sewing community.
Please feel free to share with family and friends and ask them to sign up at our website for our
free e-mail newsletter.
Happy Sewing,
The Editors of AllFreeSewing
www.AllFreeSewing.com

15 Sewing Patterns for Women’s Dresses
& Other Pretty Projects
Table of Contents
Mama’s Got a New Dress...............................5
The “Lemonade” Dress ................................10
Strapless Maxi Dress ....................................13
Strapless Ruffled Maxi Dress........................16
30 Minute 4 Seam Caftan ............................21
The Jersey Skirt ............................................24
The Craf Tee Tote.........................................26
Chevron Swing Top ......................................29
DIY Anthropologie Inspired Bolster Pillow ..32
How to Make a Quick Cuff Bracelet.............38
Bachelorette Party Dress.............................40
Classic A-Line Dress......................................44
Femme Fatale Cocktail Dress.......................46
Easy Summer Halter Dress...........................48
Tunic Dress Tutorial.....................................55

Mama’s Got a New Dress
By: Alexis Meschi from Made by Lex
Take an old T-shirt and a mere yard of fabric
and turn it into a trendy new dress. It’s one
cohesive outfit that looks like two pieces. Show
up to your next party in this little number and
you’ll not only look great, you’ll be comfortable
too!
Materials:
 Old T-Shirt and coordinating fabric
 Old men’s shirt or fabric to match
 General Sewing Supplies
Instructions:
1. Start with an old T-shirt and a yard of
coordinating fabric.
2. Find your natural waist line and cut the shirt
at that point. Save the scraps!
3. Cut out a few more scraps. Cut out a piece
from your skirt fabric and a piece of
coordinating cream chiffon.

4. Fold them in half and ruffle them.
5. Adding a lot of detail to this T-shirt will weigh
it down a lot. Add a piece of lightweight
interfacing to the inside of the shirt to balance
it.
6. Now add your first layer of the ruffle bib.
Start with the outer layer. You may want to lay
them all out beforehand so you can mark where
they will need to be sewn. Pin the first layer in
place then stitch.
7. Add the second. Pin, then sew.
8. Repeat with the third.

9. To make the front look completed add a
button strip. You can cut this off another shirt.
You can also create one by adding a piece of
fabric then sewing on some old buttons.
10. Iron the edges in then pin it in the center.
11. After that, fold it over the top of the shirt
and pin down. Then stitch it in place.
12. Determine the length you want your skirt to
be. Before attaching it to the top hem it. Here a
wide hem was made.
13. Here’s another little extra step. If you want
to bring the color of the dark top down to the
bottom it can look really put together and well
thought out. On the underside of the skirt add a
little dark grey hem tape just peeping out. It
really makes this dress look more complete.
14. Very slightly ruffle the top of your skirt.
Then stitch the ends together to create your
skirt piece.

15. Now it’s time to attach it to the top. You
might want to create a drawstring waistline so
you can adjust it for your own waist without
adding a zipper. In order to do that you need to
leave an overhand as shown on the inside of the
shirt. Pin and sew the skirt to the top.
16. Now fold that flap over and pin it to the
inside of the skirt. Stitch it closed.
17. Once you turn it right-side-out, this is what
it will look like. You now have a little pocket to
pull a drawstring through.
18. On the side seam, create two small holes for
your drawstring. You can use your seam ripper.
19. Grab whatever you want to use for your
drawstring and pull it all the way through.
20. And now you’re done!

The “Lemonade” Dress
By: Disney Powless from Ruffles and Stuff
The Lemonade Dress is a free sewing pattern
that joins together a T-shirt and a gathered skirt
to make a brand new dress. It screams spring or
summer and can be worn with or without a
sash.
Materials:
 One fitted T-shirt or tank top
 Fabric (Vintage sheets work well for this
project)
Instructions:
1. Start with a shirt or tank that fits you well (it
won't work as well with a baggy shirt) and some
fabric. Vintage sheets work well because then
it's already hemmed! You'll need enough fabric
for 1.5 X your hip measurement; cut to about
20" in length.
2. Sew the two 20" sides of fabric together, with
right sides facing each other.
3. Sew a straight stitch on the longest length, all
the way around the top of your skirt piece and
pull one of the threads to gather until it’s the
same size as your shirt hem.

4. Pin and sew to the inside of the bottom of
your shirt, using a zigzag stitch. Try to match up
your stitches with the shirt's existing hem and
avoid letting your shirt fabric stretch.
5. If you'd like to make a sash (useful for
cuteness, and hiding any rumpled seams for the
beginner sewer!) cut an 8" length of fabric that
is your hip measurement + 50 inches. You will
probably have to piece two together to get the
length, which is fine.
6. With the right sides together, fold the sash in
half length-wise and sew three of the four sides,
leaving one end open.
7. Turn the sash right-side-out, fold the edges of
the open end under, and stitch closed.
8. Wrap it around yourself, and tie in a bow!

10. It's plenty cute without the sash, too!
11. Or with a bow!

Strapless Maxi Dress
By: Sharon from Sharon Sews
Here’s the perfect project for a beginner sewist.
Beat the summer heat in this trendy and stylish
Strapless Maxi Dress. Learn how to sew a dress
with this helpful tutorial and your summer
wardrobe will be full of fun maxi dresses!
Materials:
 Lightweight woven fabric 45” wide -
enough yardage to cut two dress
lengths.
 Choose a lightweight fabric as the width
of the dress is about 64" when sewn. If
you want less ease just cut your
rectangles narrower.
 Thread
 ½" elastic
 Bias Tape
 Tape Measure
 Chalk or other Marking Pen
 Sewing Machine
 Fabric scissors
Instructions:
1. Determine the length of the dress
 Measure from your underarm to the
floor (or where you want your dress to
end).
 Add 3 inches to this measurement for
upper casing and hem. This will be the
length you cut each rectangle. In this
example the dress was cut 50” long.
2. Cut the fabric
 Lay your fabric on a large flat surface.
You can use your cutting table, but the
floor works just as well.
 Cut two rectangles 33" wide by the
length you determined in the step
above.
 If you want a closer fitting dress this is
where you'll want to cut a narrower
rectangle.
 If you want a looser fit, cut the
rectangle wider.
3. Sew the side seams
 With right sides together pin the two
large rectangles together along the long
edges, which are the side seams.
 Using a ½” seam allowance, stitch the
side seams.
 If desired, finish the seams with a
serger, a zigzag stitch, or pinking shears.

 Press the seams open.
Optional walking slits: If you want a walking slit,
stop sewing the side seam about 18" from the
lower edge on one or both sides. If you do that
be sure to turn under and hem those raw
edges!
4. Create the casings
 Turn under ¼" on the top edge of the
dress. Press.
 Turn under another ¾" on the top edge.
Press.
 This is the upper casing of the dress.
 Stitch close to the pressed edge forming
the casing.
 Leave a 1" opening to insert the elastic.
 Turn the dress so the wrong side of the
fabric is facing out.
 From the top edge of the dress, measure
down 9” and mark with chalk or pen.
 Continue measuring and marking 9” down
from the top edge of the dress until you've
drawn a solid line around the entire dress.
This is the line for the waist casing.

 Starting at one side seam, place one edge of
the seam binding along the line you just
drew.
 Pin in place.
 Stitch close to both edges of the seam
binding. Be sure to leave a 1" opening at
one side seam to insert elastic.
5. Insert the upper casing elastic
 Cut a piece of ½" elastic that fits snugly
around your chest (above your bust). Place
a safety pin on one end of the elastic and
thread it through the upper casing.
 Don't forget to pin the other end of the
elastic to the garment or you’ll lose the
elastic in the casing when you begin to pull
to thread the elastic through.
 Once the elastic is all the way through,
secure the elastic to the dress by pinning
both ends to the dress seam.
 Try the dress on to make sure the elastic is
tight enough to hold the dress up. Adjust if
necessary.
 Remove the pins, overlap the two edges of
elastic, stitch together securely, and tuck
into the casing.
 Sew the casing opening closed.
6. Insert the waistline casing elastic
 Cut a piece of ½" elastic that fits
comfortably around your waist.
 Place a safety pin on one end of the elastic
and thread it through the waist casing you
just created with the seam binding.
 Once again, don't forget to pin the other
end of the elastic to the garment.
 Overlap the two edges of elastic, stitch
together securely and tuck into the casing.
7. Hem the dress
 The hem of the dress is created the same
way as the upper casing.
 Turn under ¼” on the bottom edge of the
dress. Press.
 Turn under another ¾” on the top edge.
Press.
 Stitch close to the pressed edge.
Done!
Add a belt, some great costume jewelry and go
enjoy the compliments you'll get while wearing
your new dress.

Strapless Ruffled Maxi Dress
By: Sharon from Sharon Sews
You've seen this trendy dress in the magazines
and on all the celebrities. Impress your friends
by creating the look for yourself! Use this free
pattern to make the Strapless Ruffled Maxi
Dress. Style it with fun jewelry for a fashion-
forward outfit.
Materials:
 Gauze or other lightweight fabric
 ¼" elastic
 Single fold bias tape
 Thread
The finished length of the dress is approximately
51" measured along the side seam. Lengthen or
shorten as needed.
Instructions:
1. Make your dress pattern
Measurement A
Measure your bust around the fullest
part.
Add 12" (this is the ease) and divide by
two.
Example: Full bust = 36" + 12" = 48" / 2
= 24"
Measurement B
Measure your hip around the fullest
part.
Add 12" (this is the ease) and divide by
two.
Example: Full hip = 38" + 12" = 50" / 2 =
25"
Measurement C
Add 1" to measurement B
Example: Measurement B = 25" + 1" =
26"
 On a large sheet of paper draw a
vertical line 37" long down the center of
your paper.
 Measure 15" down from the top of the
vertical line and make a mark.
 Starting at the top of the line draw a
horizontal line equal to Measurement A
centered on the vertical line.
 Starting at the 15" mark draw a
horizontal line equal to Measurement B
centered on the vertical line.
 Starting at the bottom of the line draw
a horizontal line equal to Measurement
C centered on the vertical line.
 Connect the top line to the bottom line
along both sides.
 This is the front and back of the maxi
dress.

 If you’re full busted, on the front piece
measure 1" to the top of the vertical
line. Make a mark. Use a French curve
to draw a gently curved line from the
each side seam to the mark at the
center front.
2. Cut the dress
 Cut one dress front
 Cut one dress back
3. Calculate and cut the upper ruffle length
 Multiply Measurement A by 1.5. This is
the ruffle length Measurement D. The
ruffle width is 10"
 Cut one front bodice ruffle
Measurement D x 10"
 Cut one back bodice ruffle
Measurement D x 10
Example: Measurement A = 24" x 1.5 =
36" so the ruffles to be cut are 36" x 10"
 Cut one front bodice ruffle
Measurement D x 10"
 Cut one back bodice ruffle
Measurement D x 10
 Example: Measurement A = 24" x 1.5 =
36" so the ruffles to be cut are 36" x 10"
4. Calculate and cut the lower ruffle length
 Multiply Measurement C by 3. This is
the ruffle length Measurement E. The
ruffle width is 17".
 Cut enough lower ruffle pieces to equal
Measurement E x 17".
 You'll need to piece the ruffle to get the
desired length
Example: Measurement C = 26" x 3 =
78"
You now have the upper ruffle, the dress, and
the lower ruffle.
5. Sew the dress
 Pin the front and back dress right sides
together.
 Stitch side seams.

 From the top of the dress measure
down 10" on the wrong side and make
a mark.
 Draw a line around the entire dress.
 Be sure to use a removable fabric pen
or chalk.
 This is the line for the waistline casing.
Eliminate this step if you do not want
an elasticized waist.
 Pin the single-fold bias tape on the
inside of the dress aligning the bottom
edge of tape on the marked line.
 Stitch in place close to each edge of the
bias tape.
 Pin the front and back upper bodice
ruffles right sides together.
 Stitch side seams.
 Turn bottom edge ¼" to the wrong side;
press. Turn under ¼" again to the wrong
side; press. Stitch in place.
 Gather the upper edge of the ruffle. To
gather use a long stitch length and
stitch along the upper edge ½" from the
edge leaving thread tails at each end.
Stitch a second row of stitches ¼" away
from the edge.
 With right sides up (wrong side of ruffle
to right side of bodice), pin ruffle to
upper edge of bodice matching side
seams.

 Adjust gathers to fit.
 Stitch ruffle in place.
 Finish raw edge of seam with bias
binding.
 To create the casing turn under ¾" on
the upper edge of the bodice; press.
 Stitch casing to the bodice ½" from the
top fold being sure to keep the ruffle
free. Leave a 1" opening to insert the
elastic.
 Cut a piece of ¼" elastic a comfortable
upper chest measurement plus ½".
 Attach a safety pin to one end of the
elastic and insert in the casing.
 Pull elastic through the casing. Lap the
elastic ends by ½" and stitch together
securely.
 Pin the lower ruffles right sides
together. Stitch seams.

 Turn bottom edge ¼" to the wrong side;
press. Turn under ¼" again to the wrong
side; press. Stitch in place.
 Gather the upper edge of the ruffle.
 Pin ruffle to lower edge of dress right
sides together matching side seams.
 Adjust gathers to fit. Stitch.
 Cut a piece of elastic a comfortable
waist measurement plus ½".
 Attach a safety pin to one end of the
elastic and insert in the casing.
 Pull elastic through the casing. Lap the
elastic ends by ½" and stitch together
securely.
Done!

30 Minute 4 Seam Caftan
By: Robie Kay Dodson from So Sew Something
Want to make a unique, flowing maxi dress?
Within a half hour you can create this 30
Minute 4 Seam Caftan. Whether you're a mom
on the go or getting ready for a night out, this
free dress pattern delivers a dress that's great
for several occasions.
Materials:
 3 ¼ yards of fabric
 4 seams, 4 buttonholes, one long tube
to use as a sash
Instructions:
1. Start with your fabric. This tutorial uses 100%
light weight polyester. You might choose to
switch to a breathable fabric such as 100%
cotton.
2. First, if your fabric has a factory fold that runs
along the length of the fabric, open it up so that
you are facing the entire width of the fabric.
Then, fold the fabric in half, right sides together,
keeping the fold at the top. This means you'll
have two equal halves measuring about 1 5/8
yards with the fold at the top.
3. To create your sleeves and side seams,
measure down along the selvages on each side
about 12". Place a pin. Sew all the way down
from the pin to the end of the fabric. (Be sure to

reverse stitch at the beginning since this
opening is your sleeve.)
4. Now that you've created your side seams and
your sleeves, you need to create your neckline.
You can pin your fabric right to your ironing
board, and then start guessing how big the
opening should be. Start small on this guess -
you can always go bigger but you can't go
smaller.
5. Next, you'll need to add bias binding along
your neckline. If you have enough fabric, create
bias tape from the dress fabric. Otherwise, use
store bought or coordinating bias tape.
6. Now you need to add four buttonholes at the
waist - front and back right side, front and back
left side. To decide where, hold the dress up to
you and go to a mirror. Locate your waist and
put a pin at the very right side and the very left
side. Then, back at the ironing board use those
pins to also mark the identical spots on the back
left and back right. (These button holes are
used to hold your belt in place. See photo
below) When opening up your buttonhole with
a seam ripper, please be sure it's not too dull.
You could end up with puckered buttonholes,
otherwise.
7. Finally, hem the bottom and create a quick
tube for the sash. Thread the sash to the front

from the back buttonholes. You've got yourself
a fabulous caftan, maxi dress, billowy dress!
If you're wondering about hemming the
sleeves, you use the selvege so there's no need!
This truly is a 4 seam, 4 buttonhole, 1 sash piece
- easy peasy!

The Jersey Skirt
By: Disney of Ruffles & Stuff
You'll have a hard time finding anything more
comfortable than The Jersey Skirt. It's also one
of the easiest skirts to make! This simple sewing
project makes a great skirt for any season.
Materials:
 Jersey Yardage for an adult skirt
 T-shirt for a child’s skirt
 Thread
 Sewing Machine
For a child's skirt, you can probably use a T-shirt
that you have lying around, but for an adult
skirt you'll need to get your hands on some
jersey yardage.
Before you start: Fabrics usually have more
stretch on one side than the other, so be sure
that you cut your fabric with the stretchy side
goes around you!
Instructions:
1. Measure around your hips (or wherever you
wear your skirts). Then cut a waistband that is ¾
your measurement, and twice as tall as you
want your waistband to be. This was about 26"
X 11". (You can also just stretch the fabric
around you until it's fairly tight, but not
uncomfortable, and use that as your
measurement).
2. Cut a skirt piece that is about twice the
measurement of your waistband, and however
long you want it to be. This is 25" long.
3. Using your machine's longest strait stitch,
sew all the way down the top side of the skirt
panel. Then pull the top thread to gather, until
it's the same length as your waistband.
4. Fold the waistband in half width-wise, and lay
the skirt panel on top of the open edges. Try to
line it up so that the skirt panel hangs over the
waistband edges a little bit.
5. Sew the skirt panel onto the waistband, using
a zigzag stitch.

6. Cut out two pocket pieces. Mine were 11" on
the top, 6" on the bottom, and 7.5" on the
sides. Make sure it's big enough to fit your
hands in once sewn!
7. Hold your skirt up to yourself and mark
where you want your pockets to be. Pin your
pocket onto your skirt and sew on the side with
the gathered top showing. For a slouchy pocket,
you want your pocket to have extra fabric in the
middle, so pin it about 6" apart on top, with
about a 4" pleated bottom. (see second photo)
8. Sew the open ends of your skirt together with
right sides facing each other, and you’re done!

The Craf Tee Tote
By: Megan from Brassy Apple
Here's a DIY refashion project that truly calls for
a creative mind. Dress up your bag as uniquely
as you want because The Craf Tee Tote is meant
to be one of a kind! Learn how to make a tote
bag and give this fun project a try.
Materials:
 One T-shirt for the handbag (used
yellow youth tee size 10-12)
 One Embroidery hoop set (two rings);
these where about 9" handles
 Ribbon (5 ¼ yards)
 Glue Gun
 Scissors
 Sewing machine
 Two large grommets
 Hammer
 Embellishments - buttons, zippers,
fabric, T-shirt scraps, etc.
Instructions:
1. Turn the T-shirt you are using for the main
handbag inside out and lay flat. Fold in half
lengthwise. Round the bottom by cutting only
the bottom hemline about 5 inches up the side.
2. Cut a diagonal line a few inches under the
arm to the middle of the T-shirt. Open and lay
flat.
3. This shirt ended up measuring about 17.5
inches from top point to bottom. Turn right-
side-out.

4. Embellish! Cut out shapes from fabric lay out
in a design you like, pin, and sew. Add ruffles,
rosettes, buttons, sequins, etc.
5. Once it is embellished turn right-side-out. Pin
the bottom edge rounded edge together and
sew closed with your sewing machine.
6. For the handles, wrap each embroidery hoop
with wide ribbon. Use hot glue to secure the
end and wrap tightly overlapping the ribbon.
Every few inches add another drop of hot glue
to keep the ribbon in place and from
unraveling.
7. To attach the handles, lay out the purse and
fold back the top. Place the handle so there is
about 3 ½ - 4" from the handle to the top point.

8. Add a small running bead of hot glue to the
handle and fold the fabric over it. This will help
the fabric from bunching up to tightly and keep
it spread out wide. Repeat on the opposite side
with the other handle.
9. For the finishing, keep the folded triangle
piece around the handle in place (and for some
extra design interest) by adding a large
grommet to the center under each handle.
And you are done!

Chevron Swing Top
By: Megan from Brassy Apple
You're sure to get compliments with this one
hand sewn top. The Chevron Swing Top is easy
to make and incorporates one of the latest
trends. If you've been meaning to give chevron
a try, use this free sewing pattern and get ready
to impress.
Materials:
 1 yard of knit/poly fabric
 Scissors
 Measuring Tape
 Straight Pins
 Seam Ripper (optional)
 Sewing Machine
 Coordinating Thread
 Chevron Stencil/template pattern to
trace (this chevron was 2 - 2.5" wide)
Instructions:
1. Lay your fabric flat and cut a 27" X 27" inch
square on the fold. Cut down the fold to create
two 27 X 27" squares.
2. Cut a strip 2" X 58" long. This will be
threaded through the neckline. Place right sides
together lengthwise. Sew along the top creating
a tube. Turn right side out and tie a simple knot
in each end.
3. Add interest to the front by adding a pattern
and texture. Using a chevron template as a
pattern, cut a couple of long strips using the
same knit fabric OR cut strips from an accent
color fabric.

4. Measure out a 15" X 15" triangle. This will be
folded over the back so do not place anything in
this space.
5. Place and pin one chevron strip onto one of
the 27" X 27" squares in a design that you like.
Be sure to "tilt" the square or turn it to a
diamond shape while placing and pinning the
strips. Add the chevron strips just at the top,
over the entire top, just around the edges, etc.
6. Sew four lines on each Chevron strip. One
along the top, one along the bottom, and two in
the middle (trying to keep equal spacing
between the lines). Repeat on all the strips.
7. Using a seam ripper or your sewing scissors,
carefully clip in between the top two lines and
the bottom two lines. ONLY cut through the top
layer of each strip. This will create fun lines and
texture on the top.
8. Turn the main piece over and fold down the
top corner creating a Triangle with sides that
measure 15". Sew a 1" casing along the top.
Repeat on the back square piece as well. Clip
away the excess fabric.

9. Take the finished strip from step 2 and thread
it through the casing of both the front and back
pieces.
10. Lay the front and back piece flat with right
sides together. Measure in from the corner on
each side to sew the two pieces together. Trim
the excess fabric.
11. Turn right-side-out and slip on. Adjust the
gathers to be the width you like and tie over
one shoulder.

DIY Anthropologie Inspired Bolster
Pillow
By: Jessica from Sew Homegrown
Looking for a way to make a trendy pillow
without breaking the bank? The DIY
Anthropologie Inspired Bolster Pillow is a great
alternative. Make this cute pillow with fabric
that fits your color scheme. It’s a great way to
get the look for less!
Materials:
 Two bags of Polyfil or a 23" X 9" bolster
pillow form (you would probably have
to order it)
 A yard of colorful fabric (fabric A)
 ¾ yard of contrasting fabric (fabric B)
 ¾ of solid fabric for cording (fabric C) -
you could possibly use fabric A
remnants
 2 ½ yards of cable cord (don't be afraid
of this, they sell it everywhere. It costs
around .29 a yard)
 Perle Cotton Embroidery Floss
 Sewing Machine/Thread
 Scissors
 Water Soluble pen
 Pins
Instructions:
1. Once you have assembled your materials,
you need to cut four pieces.
*One rectangle 29" X 20" of fabric A
*One rectangle 29" X 4 ¼" out of fabric B
*two 10" circles out of fabric A
(you can draw your own or print out my pattern
here)
It's nice if you make the fabric pattern match.
2. Lay the 4 ½" strip on top of the rectangle,
edge to edge, right sides together.

3. Pin together and sew using a ¼" seam.
4. Open and press flat.
5. Time to add the detail. The Anthro bolsters
have pick-stitching detail. You can mimic that
look with a simple large quilting stitch.
6. Draw lines across the fabric, 2-3 inches apart
(these are 3"), using a water soluble pen.
7. You can alternate embroidery floss colors
every two rows (the Anthro ones alternate
every three).
8. You can skip this stitching detail step.
9. For cording, lay your fabric out like this:

10. Fold the bottom right corner of the selvage
edge up to the top left corner of the cut edge.
11. You can split that fold with your scissors.
12. Then measure along that diagonal edge you
just split 1 ½".
13. Cut both layers, resulting in two bias strips 1
½" x 31".
14. Now, fold one strip in half and place the
cording in the crease.
15. You will probably need to put the zipper
foot on. It looks like this:

16. Topstitch along the fabric right next to the
cording.
17. The finished cording looks like this:
18. Once you have finished both pieces of
cording, snip ¼" into the lip - this will make it fit
around the circle gracefully.
19. Pin the cording lip to the right side of the
circle. Match the raw edges of the circle and the
cording.
20. When you make it all the way around the
circle, open one end (you may need to rip the
seam just a little) and fold the raw edge back.
21. Pull that cording out of the way, and lay the
other end of cording in its place.

22. Close the fabric over the cord.
23. Topstitch it on like this:
24. Right sides together, pin the 29" edge of the
rectangle around the circle.
25. You will need to clip the edge of the
rectangle just like you clipped the cording lip.
26. Sew in place (still feeling for the cording -
you don't want to sew over it).
27. You basically sew right next to the cording
three times - once while making the cording,
once around the circle, and once around the
rectangle.

28. Repeat with the other side or the rectangle.
29. Flip it right-side-out to make certain it looks
pretty.
30. Then flip it inside out and sew along the 24"
side of the pillow - leave about a 6" opening for
stuffing (if you are using a pillow form, you will
need to leave a larger opening).
31. Flip the pillow right-side-out and stuff well
with polyfil. Pin the closing.
32. Whipstitch or blind stitch the opening
closed.
Now stare in AMAZEMENT at your success!

How to Make a Quick Cuff Bracelet
By: Robie from So Sew Something
Learning How to Make a Quick Cuff Bracelet
makes a great project for any beginner sewist.
Following this tutorial will give you a cool
accessory to throw on with any ensemble. Plus,
you can use up old scraps through a simple and
fun project.
Materials:
 “Jelly Roll” or Fabric scraps
Instructions:
1. Unroll your jelly roll/scrap fabric.
2. Wrap your favorite strip around your wrist to
determine where to trim off the excess. Cut two
identical strips.

3. Choose your second favorite fabric to serve
as the coordinating ruffle. Attach it to the top
and bottom of the cuff. Fold it in half, press, and
trim off about ½"
4. Sew the ruffle fabric onto the two sides,
making your ruffles/pleats as you go. Of course
you could opt to make your pleats/ruffles ahead
of time if you prefer. It's much faster just to
wing it.
5. Apply fusible interfacing to the second strip
of the main fabric. Then, sew both main fabric
strips together, right sides facing.
6. Turn right-side-out and press. Next, finish
your two edges however you like.
7. To fasten the two edges, simply attach a
snap.

Bachelorette Party Dress
By: Suzannah from Adventures in Dressmaking
There's nothing more fun than a night out with
your girlfriends. For a bachelorette party (or
really any fun occasion) the Bachelorette Party
Dress makes the perfect outfit. For instructions
on how to sew a dress for a special night, follow
this tutorial.
Materials:
 Ruffle Fabric
 Bodice Fabrics
 Strapless Dress Pattern
 Lace
1. Cut out the bodice of the under layer (pale
pink twill), then cut out the lace with the same
shape but with some extra to stick up off the
top. For the seam allowances in this example,
only an extra half inch at the most of the lace
was needed.
2. Overlap the bodice pieces 1" to allow for the
½" vertical seam allowance, so the lace is the
right size.
3. This dress zips up the back - if you change
where yours zips, take note at that part of the
tutorial.
4. Once the bodice is cut out, tackle the skirt.
Basically, measure yourself and decide what
your skirt length should be. Here the skirt to
comes down to just above the knees. Cut out
one panel (one width of the fabric), cutting
halfway between the rows of ruffles.

5. Make half of a second panel to drape with
(the skirt will end up being 1.5 panels around),
cut another piece the same length to about the
middle of the fabric.
6. Cutting down the center of your folded
fabric, along where the fold would be, cut
vertically straight down to your cut edge.
7. Back to the full panel, you'll cut off one
corner so you can round off what becomes the
top edge, which will be gathered.
8. You can round it off even more by cutting off
any tiny pieces.
9. Sew your side seams like you would on any
skirt. Sew two of your side seams, leaving the
half piece open on whichever side you want to
cross over it. The half-width panel will hang flat
in the front, and one side of the full-width panel
will cross over it.
10. Gather your curved edge of the wide panel.
11. Now you have a long curved, gathered
piece. Mark the sides so you know where they

are.
12. Arrange the gathers mostly concentrated at
the point where the long edge touches the
waist seam. Pin a lot!
13. Create a center back placket for your
zipper. An invisible zipper is best with this
fabric.
14. Now, with all those pins still in place, gather
all the way around the skirt, starting at the
center back.
15. Now attach your skirt to your bodice. Watch
where the center front curved part sits.

16. Flip and give it a little pressing so it stays flat
at the waist, not too bulky.
17. You can gather the bottom few inches of the
underskirt (the narrow piece) so it doesn't risk
hanging down below the swooped up overlap.
Do a gathering stitch with strong thread and tie
off the ends.
And here it is!

Classic A-Line Dress
By: Emily from Nap-Time Creations
This Classic A-Line Dress tutorial is the ideal
project to make if you're just starting to learn
how to sew a dress, because it shows you how
to create one piece from a completely different
pattern. Take a look and find out how Emily
from Nap-Time Creations adjusted a shirt
sewing pattern into a dress of her own. It yields
such a great result, custom-fit for you.
Materials:
 Top pattern of your choice
 Fabric to allow for the bodice of your
dress and extra skirt.
Instructions:
1. Print the pattern and cut out for your size.
Note - this pattern was size four.
2. Place pattern over fabric. Do not cut out.
Draw an appropriately sized triangle to add a
cap sleeve to the design.
3. Also make sure to allow for skirt length
before cutting out your pattern. The front of
your bodice will be wider because of the pleats
at the neckline. You can trim the skirt width to
match the back.
4. If you'd like to include a pocket, cut out a
shape that you'd like for the dress. Pin it to the
side of the dress.
5. Place it over your shoulders after you have
sewed those and see where you want the
pocket to be.
6. Sew a pocket (from pin to pin) to the front of
the skirt and to the back of the skirt.

7. After you have sewed them to the front and
back, pin down the side-seam and around the
outside of the pocket. Turn it back right-side-
out and top-stitch the pocket opening.
8. Finish up the dress following the rest of your
pattern instructions. Unlike the pattern in this
example, the neckline and arm holes are made
with a hidden bias tape and opposed to the
outside like the tank.

Femme Fatale Cocktail Dress
By: Maz from Be a Crafter XD
You'll bring the party to a grinding halt in this
gorgeous Femme Fatale Cocktail Dress. This DIY
dress is absurdly easy and quick to make, but
looks absolutely phenomenal once it's finished.
If you're a beginner sewist just starting to learn
how to make your own clothes, this is the
perfect project for you. The end result is so
elegant and understated. It has a nice length
and a wonderful striped detail at the ribcage
that really pulls the whole thing together. This
dress will become your cocktail party go-to!
Materials:
 Fine Cloth (any type and color you like)
 Zipper
 Scissors
 Sewing Needle
 Sewing Thread
 Sewing Machine
 Measuring Tape & Ruler
 Tailor's Chalk
Note: For this pattern, you'd better draft it on
paper then put it on your fabric and cut out.
------ basic pattern line
____ dress line to cut out
Instructions:
1. The common length of a cocktail dress is
knee length or tea length. You'll see each side of
this dress has two parts, the body part and skirt
part.
For the front side, remember to fold your fabric.
Pleat: 2cm width, 16 cm length
2. For the back side, remember to add 2 cm for
the zipper line. At least 35 cm zipper length.

3. Sew body parts to skirt parts.
4. Sew pleats.
5. Cut and sew braces for both the front and
back sides.
The front brace:
6. Attach a zipper to the back side (this tutorial
uses an invisible zipper).
7. Sew the body lines.
8. Make two straps and attach to the front side.
9. Sew hemlines and finish!

Easy Summer Halter Dress
By: Deby from So Sew Easy
Add some style to your summer in a breeze.
This Easy Summer Halter Dress is a simple way
to add some flair to your warm-weather
wardrobe. The provided pattern will walk you
through making a simple dress that you will love
to wear to the beach, a barbecue, or just to
lounge around. Sewing your own clothes is a
great way to stay up on style without breaking
the bank. Choose your favorite fabric and the
style you like best for the straps, then sew
away. You might even want to make a few in
different colors.
Materials:
 Sewing machine and thread, sewing
basics such as scissors
 Clear Elastic 3/8th inch wide
Optional but useful
 Wash Away Wonder Tape
 Knit stay tape or Stitch Witchery
 Stretch or ball point needle
 Twin Stretch Needle
 Details on pattern and sizing
instructions
Instructions:
1. Identify the back of the dress (the longer
piece) and add a strip of Wash Away Wonder
Tape to the top edge, just inside the raw edge
on the wrong side.
2. Measure across the top edge and cut
a length of Clear Elastic 1 inch LESS than the top
edge measurement. If you can’t get the clear
elastic, then you can also use a regular elastic
but it will be bulkier.
3. Remove the backing tape from the sticky
tape and stick your clear elastic in place along
the top edge, centering the elastic with about ½
inch clear at each end. If you don’t have the
sticky tape, then you can pin the elastic in place.

4. Take your dress to the sewing machine and
with the wrong side facing up, turn the top
seam over using the elastic as a guide to get a
straight line. Fit your Stretch or ball point
needle. Sew the elastic in place using a triple
zigzag stitch if your machine has one (it's like a
wide zigzag where each part is made of three
small stitches.) If you only have a regular zigzag
stitch, use this on a wide setting to sew through
the elastic.
5. Here’s what it looks like from the outside.
The stitches allow it to still stretch and the
elastic will hold it snugly against your body so
the dress doesn’t fall! Set aside the back for
now.
6. Time to make the bust part of the dress. Take
the rectangular piece and sew a line of long
basting stitches between the circles, ¼ inch
from the edge. Do not back-stitch at each end
and leave the thread ends long. Repeat on both
sides.
7. Fold the fabric at the off-center notch, with
the WRONG sides together. Put in a pin at the
fold and then match up the corners and pin
these too. Gently pull the gathering threads to
gather up the fabric between the
circles. Continue to gather until the gathered
edge measures the same as the flat edge.

8. Once both edges match in length (or close
enough), match up the raw edges and pin
together. Repeat these steps for the opposite
side.
9. Take the fabric to the machine, and with the
gathers facing upwards and the raw edges
matching, sew in place along the previous line
of basting stitches. Adjust the gathers as you
sew. Repeat for the other end.
10. Now match the two remaining raw edges on
this piece. You need to keep these
together. You can either use your Wonder Tape
to baste the two edges together, or match, pin,
and sew close to the edge.
11. To make the small piece that gathers the
center of the bodice, find the
small rectangular piece of fabric you cut
earlier. Fold the wrong sides facing with the two
shorter sides together – see arrows.

12. Sew along the shorter side to make a tube
of fabric. Use a narrow zigzag stitch so this can
stretch.
13. Turn inside-out and center the seam line
facing upwards. This will be in the inside of the
gathering piece.
14. Place your bodice piece on top with the raw
edges even, and line up the center notch on the
bodice with the center seam line on the
gathering piece. Pin in place.
15. Roughly pleat the bodice in the center and
bring up the other end of the gathering piece,
matching the centers and raw edges until you
have a bow shape. Remove pins and replace
them through all layers. Sew close to the edge
through all layers. An overcasting stitch works
best, or a zigzag close to the edge.
16. Now match up the bodice piece with the
waist piece. The gathered side of the bodice will
be the right side or outside. You can see that
the top part will need to be eased into the mid-
section.

17. Pin the two pieces right-sides-together,
stretching the mid-section piece a little to
match to the width of the bodice piece. Line up
the center front and the outside seams. It will
look a little awkward, like this:
18. Carefully sew the two together using a
narrow hem. You can sew with the bodice piece
upwards to check as you sew that you are
sewing the hem a little wider than your earlier
basting stitches along the bottom edge. This
saves removing them later.
19. Now match up raw edges on the bottom of
the mid-section with the top of the front
skirt. Pin and stitch in place, right sides
together, using a narrow zigzag stitch or an
overcasting stitch and foot. The front piece is
now complete.
20. Pin the dress back to the dress front, right
sides together along the side seams. Start to pin
at the bottom edge keeping fabric even. The
front of the dress is slightly longer than the back
to allow extra room for the bust. Once you have
pinned to approximately the waist area, match
the top of the dress back and front, and
pin. Then stretch the fabric of the back piece
slightly to match the front piece and pin the
remaining side seams together. Try on the dress
for fit before sewing. Careful with the pins!

21. Sew the side seams using approximately a
half inch seam. Sew with the gathered bodice
side up so that you can make sure that your
side seam is slightly larger than the existing
basting stitches on the gathered panel to make
sure those stitches won’t show on the outside.
22. Now try on your dress and see if you need
to make any adjustments in those side seams to
get a nice fit.
23. Finish the side seams by either pressing
them open and then flat, or trimming and
finishing with an overcasting stitch to neaten
the edges. You can see narrow overcast seams
in this photo – this gives a nice finish on the
inside.
24. Create a smooth hemline. You don’t want to
spoil all the hard work now with a wavy seam as
can often happen with knit fabrics, so use a knit
stay tape along the bottom before sewing. Or at
least test your intended hemming method and
stitch on some scrap fabric first. Iron your stay
tape just inside the edge of the fabric.
25. Turn your hem to the inside using the edge
of the stay tape as a guide and pin in place. If
you have a Twin Stretch Needle, you can use
this for a professional, neat, and stretchy hem
(remember to sew it face up with the twin
needle). If using a single needle, hem with the
wrong side up and a single line of straight
stitches.

26. Your (strapless) dress is now ready to wear!
However, you might want to add some support
for the bodice. Try some of these optional
ideas:
 Thread some ribbon/lace/leather/cord
through the gathering band at the
center of the bodice and tie behind the
neck.
 Braid three X inch-wide pieces of fabric
to make a central halter strap.
 Make two tubes of matching (or
contrasting) fabric and stitch to the
bodice ‘cups’ to create a halter neck.
Make them wide or narrow as you
prefer. A good option for a larger bust.
 Use a braided strap from the cups to
behind the neck.
 Make two tubes of fabric and attach
them as straps from the bust to the top
of the dress at the back. Place them
carefully to cover your bra straps for
even more support.

Tunic Dress Tutorial
By: Justine from Sew Country Chick
Make your own comfy knit dress with this Tunic
Dress Tutorial. This easy sewing project is
prefect for beginners and is quick to make. It's a
simple, flattering design that looks great with a
fun patterned fabric.
Materials:
T-Shirt (from which to trace the pattern)
Fabric
General Sewing Supplies
Instructions:
1. Trace around a t-shirt. Extend the armhole as
pictured to make a one piece, dolman-sleeved,
dress pattern.
2. Mark on you fabric where your side seam
ends. Draw in your neckline. You can make it
lower to create a scoop as shown here or leave
it as is. Mark where your casing will be sewn on
at the waist. Also measure how long your hem
will be.
3. Add your 5/8 inch seam allowances.
4. Lift up your hem at the side seam about ½
inch to eliminate side droop. A good way to do
this is to measure from the waist line down to
the hem from the CF and then the side. Make
sure they are the same length.

5. Draw a line to sew on the casing for the
elastic. Finish your neck, sleeves, and hem with
a cover stitch machine. You can also get the
same effect with a twin needle on a basic
machine. Just fold over your fabric 5/8 inch,
press them, and stitch.
6. For the waist casing you can use a lycra knit
binding which works. You can also use bias tape
ironed flat or make your own casing from your
dress fabric. Just make it about ½ wider than
your waist elastic. This elastic is ¾ inch wide so
the band was made. Sew it on with a very small
seam allowance, between 1/8 and ¼ inch.
Elastic for the waist should be about 2 to 3
inches smaller than the waist measurement.
If you are quick this pattern will take about half
an hour to make and cut and about an hour to
two hours to sew.

A special thanks to our contributors:
Deby from So Sew Easy
Disney from Ruffles & Stuff
Emily from Nap-Time Creations
Jessica from Sew Homegrown
Justine from Sew Country Chick
Lex from Made by Lex
Maz from Be a Crafter XD
Megan from Brassy Apple
Robie from Sew Sew Something
Suzannah from Adventures in Dressmaking
Sharon from Sharon Sews
Sign up for our free sewing newsletter and receive more low-cost collections, free sewing projects, quick
tips, home décor ideas and more right in your inbox every week.

15 dress-pretty-project-womens-e book

More Related Content

What's hot

Viewers also liked

Similar to 15 dress-pretty-project-womens-e book

Recently uploaded

15 dress-pretty-project-womens-e book