2023-2024-syllabus.pdf

Version 1
Syllabus
Cambridge International AS & A Level
Geography 9696
Use this syllabus for exams in 2023 and 2024.
Exams are available in the June and November series.

Copyright © UCLES September 2020
Cambridge Assessment International Education is part of the Cambridge Assessment Group. Cambridge Assessment is
the brand name of the University of Cambridge Local Examinations Syndicate (UCLES), which itself is a department of the
University of Cambridge.
UCLES retains the copyright on all its publications. Registered centres are permitted to copy material from this booklet for
their own internal use. However, we cannot give permission to centres to photocopy any material that is acknowledged to a
third party even for internal use within a centre.
Changes to the syllabus for 2023 and 2024
The latest syllabus is version 1, published September 2020.
There are no significant changes which affect teaching.
You are strongly advised to read the whole syllabus before planning your teaching programme.
Any textbooks endorsed to support the syllabus for examination from 2018 are still suitable for
use with this syllabus.

Contents
Introduction...........................................................................................................................2
Why choose Cambridge International?
Why choose Cambridge International AS & A Levels?
Why choose Cambridge International AS & A Level Geography?
Supporting teachers
1 Syllabus overview............................................................................................................9
1.1 Content
1.2 Assessment
2 Syllabus aims and assessment objectives....................................................................12
2.1 Syllabus aims
2.2 Assessment objectives
2.3 Relationship between assessment objectives and components
2.4
Relationship between assessment objectives and qualifications
2.5 Geographical skills
2.6
Resources, examples and case studies
3 Syllabus content............................................................................................................17
3.1 Paper 1 Core Physical Geography
3.2 Paper 2 Core Human Geography
3.3 Paper 3 Advanced Physical Geography Options
3.4 Paper 4 Advanced Human Geography Options
4 Description of components...........................................................................................29
5 Glossary of command words.........................................................................................33
6 Other information..........................................................................................................34
Equality and inclusion
Language
Making entries
Exam administration
Retakes
Grading and reporting
How students, teachers and higher education can use the grades

Cambridge International AS A Level Geography 9696 syllabus. Introduction
Syllabus for examination in 2023 and 2024.
2 www.cambridgeinternational.org/alevel Back to contents page
Why choose Cambridge International?
Cambridge International prepares school students for life, helping them develop an informed curiosity and a
lasting passion for learning. We are part of the University of Cambridge.
Our Cambridge Pathway gives students a clear path for educational success from age 5 to 19. Schools can
shape the curriculum around how they want students to learn – with a wide range of subjects and flexible
ways to offer them. It helps students discover new abilities and a wider world, and gives them the skills
they need for life, so they can achieve at school, university and work.
Our programmes and qualifications set the global standard for international education. They are created
by subject experts, rooted in academic rigour and reflect the latest educational research. They provide a
strong platform for students to progress from one stage to the next, and are well supported by teaching and
learning resources.
We review all our syllabuses regularly, so they reflect the latest research evidence and professional teaching
practice – and take account of the different national contexts in which they are taught.
We consult with teachers to help us design each syllabus around the needs of their learners. Consulting
with leading universities has helped us make sure our syllabuses encourage students to master the key
concepts in the subject and develop the skills necessary for success in higher education.
Our mission is to provide educational benefit through provision of international programmes and
qualifications for school education and to be the world leader in this field. Together with schools, we
develop Cambridge learners who are confident, responsible, reflective, innovative and engaged – equipped
for success in the modern world.
Every year, nearly a million Cambridge students from 10 000 schools in 160 countries prepare for their
future with the Cambridge Pathway.
We think the Cambridge curriculum is superb preparation for university.
Christoph Guttentag, Dean of Undergraduate Admissions, Duke University, USA
Cambridge students develop a deep understanding of subjects and independent
thinking skills.
Principal, Rockledge High School, USA

3
www.cambridgeinternational.org/alevel
Back to contents page
Why choose Cambridge International AS A Levels?
The best motivation for a student is a real passion for the
subject they’re learning. By offering students a variety of
Cambridge International AS A Levels, you can give them
the greatest chance of finding the path of education they
most want to follow. With over 50 subjects to choose from,
students can select the ones they love and that they’re best
at, which helps motivate them throughout their studies.
Following a Cambridge International AS A Level programme
helps students develop abilities which universities value highly,
including:
• a deep understanding of their subjects
• higher order thinking skills – analysis, critical thinking,
problem solving
• presenting ordered and coherent arguments
• independent learning and research.
Our approach in Cambridge International AS A Level encourages learners to be:
• confident in working with information and ideas – their own and those of others
• responsible for themselves, responsive to and respectful of others
• reflective as learners, developing their ability to learn
• innovative and equipped for new and future challenges
• engaged intellectually and socially, ready to make a difference.
Cambridge International AS A Level offers a choice of assessment routes with staged assessment
available in many subjects: Cambridge International AS Level can be offered as a standalone qualification or
as part of a progression to Cambridge International A Level:
Students take all papers of the
Cambridge International A Level course
in the same examination series, usually
at the end of the second year of study.
Students take the Cambridge
International AS Level in Year 1 and
in Year 2 complete the Cambridge
International A Level.
Students take the Cambridge
International AS Level only. The
syllabus content for Cambridge
International AS Level is half
of a Cambridge International
A Level programme.
Option one
Option two Option three
Year
2
Year
1
Cambridge International
AS Level
(standalone AS)
AS Level
(AS is first half of A Level)
A Level
(remainder of A Level) Cambridge
International
A Level
Confident
a
g
E
n
g
e
d
Cambridge
learner

International recognition and acceptance
Our expertise in curriculum, teaching and learning, and assessment is the basis for the recognition of
our programmes and qualifications around the world. Every year thousands of students with Cambridge
International AS A Levels gain places at leading universities worldwide. They are valued by top universities
around the world including those in the UK, US (including Ivy League universities), Europe, Australia, Canada
and New Zealand.
UK NARIC, the national agency in the UK for the recognition and comparison of international qualifications
and skills, has carried out an independent benchmarking study of Cambridge International AS A Level and
found it to be comparable to the standard of AS A Level in the UK. This means students can be confident
that their Cambridge International AS A Level qualifications are accepted as equivalent, grade for grade, to
UK AS A Levels by leading universities worldwide.
Learn more
For more details go to www.cambridgeinternational.org/recognition
Quality management
Cambridge International is committed to providing exceptional quality. In line with this commitment, our
quality management system for the provision of international qualifications and education programmes
for students aged 5 to 19 is independently certified as meeting the internationally recognised standard,
ISO 9001:2015. Learn more at www.cambridgeinternational.org/ISO9001
Cambridge Assessment International Education is an education organisation and politically
neutral. The contents of this syllabus, examination papers and associated materials do not endorse
any political view. We endeavour to treat all aspects of the exam process neutrally.
The depth of knowledge displayed by the best A Level students makes them
prime targets for America’s Ivy League universities
Yale University, USA

5
Why choose Cambridge International AS A Level Geography?
Geography occupies a central position in understanding and interpreting issues affecting people,
places and environments, and change in both space and time. Cambridge International AS and
A Level Geography helps learners develop the knowledge and skills that will prepare them for
successful university study.
About the syllabus
Cambridge learners will develop:
• an understanding of the principal processes operating within physical geography and human geography
• an understanding of the causes and effects of change on natural and human environments
• an awareness of the usefulness of geographical analysis to understand and solve contemporary human
and environmental problems
• the ability to handle and evaluate different types and sources of information
• the skills to think logically, and to present an ordered and coherent argument in a variety of ways
• an excellent foundation for studies beyond Cambridge International A Level in Geography, in further or
higher education, and for professional courses.
Key concepts
Key concepts are essential ideas that help students develop a deep understanding of their subject and make
links between different aspects. Key concepts may open up new ways of thinking about, understanding or
interpreting the important things to be learned.
Good teaching and learning will incorporate and reinforce a subject’s key concepts to help students gain:
• a greater depth as well as breadth of subject knowledge
• confidence, especially in applying knowledge and skills in new situations
• the vocabulary to discuss their subject conceptually and show how different aspects link together
• a level of mastery of their subject to help them enter higher education.
The key concepts identified below, carefully introduced and developed, will help to underpin the course you
will teach. You may identify additional key concepts which will also enrich teaching and learning.
The key concepts for Cambridge International AS A Level Geography are:
1 Space: the implications of spatial distributions and patterns of a range of physical and human
geographical phenomena.
2 Scale: the significance of spatial scale in interpreting environments, features and places from local to
global, and time scale in interpreting change from the geological past to future scenarios.
3 Place: the importance of physical and human characteristics which create distinctive places with
different opportunities and challenges.
4 Environment: how the interactions between people and their environment create the need for
environmental management and sustainability.
5 Interdependence: how the complex nature of interacting physical systems, human systems and
processes create links and interdependencies.
6 Diversity: the significance of the similarities and differences between places, environments and people.
7 Change: the importance of change and the dynamic nature of places, environments and systems.
Teachers are expected to embed the key concepts through the study of the topics, both in general and
specifically through examples and case studies.

Guided learning hours
Guided learning hours give an indication of the amount of contact time teachers need to have with learners
to deliver a particular course. Our syllabuses are designed around 180 guided learning hours for Cambridge
International AS Level, and around 360 guided learning hours for Cambridge International A Level.
These figures are for guidance only. The number of hours needed to gain the qualification may vary
depending on local practice and the learners’ previous experience of the subject.
Prior learning
We recommend that learners who are beginning this course should have previously completed a Cambridge
O Level or Cambridge IGCSE™
course or the equivalent in Geography.
Progression
Cambridge International A Level Geography provides a suitable foundation for the study of Geography
or related courses in higher education. Equally it is suitable for candidates intending to pursue careers or
further study in Planning, Environmental Subjects, Development, Tourism, etc., or as part of a course of
general education.
Cambridge International AS Level Geography is the first half of Cambridge International A Level Geography.
Depending on local university entrance requirements, the qualification may permit or assist progression
directly to university courses in Geography or some other subjects.
We recommend learners check the Cambridge recognition database and university websites to find the
most up-to-date entry requirements for courses they wish to study.
How can I find out more?
If you are already a Cambridge school
You can make entries for this qualification through your usual channels. If you have any questions,
please contact us at info@cambridgeinternational.org
If you are not yet a Cambridge school
Learn more about the benefits of becoming a Cambridge school from our website
at www.cambridgeinternational.org/join
Email us at info@cambridgeinternational.org to find out how your organisation can register to
become a Cambridge school.

7
Cambridge AICE
Cambridge AICE (Advanced International Certificate of Education) Diploma is the group award of the
Cambridge International AS A Level. It gives schools the opportunity to benefit from offering a broad
and balanced curriculum by recognising the achievements of candidates who pass examinations from
different curriculum groups.
Learn more
For more details go to www.cambridgeinternational.org/aice
Our research has shown that students who came to the university with a
Cambridge AICE background performed better than anyone else that came to the
university. That really wasn’t surprising considering the emphasis they have on critical
research and analysis, and that’s what we require at university.
Assistant Vice President for Enrollment Management, Florida State University, USA
Cambridge International AS A Levels prepare students well for university
because they’ve learnt to go into a subject in considerable depth. There’s that
ability to really understand the depth and richness and the detail of a subject. It’s a
wonderful preparation for what they are going to face at university.
US Higher Education Advisory Council

Supporting teachers
We provide a wide range of resources, detailed guidance and innovative training and professional
development so that you can give your students the best possible preparation for Cambridge International
AS A Level. To find out which resources are available for each syllabus go to our School Support Hub.
The School Support Hub is our secure online site for Cambridge teachers where you can find the resources
you need to deliver our programmes. You can also keep up to date with your subject and the global
Cambridge community through our online discussion forums.
Find out more at www.cambridgeinternational.org/support
Teaching and assessment
• Endorsed resources
• Online forums
• Support for coursework and speaking tests
Results
• Candidate Results Service
• Principal examiner reports for teachers
• Results Analysis
Learning and revision
• Example candidate responses
• Learner guides
• Past papers and mark schemes
• Specimen paper answers
Planning and preparation
• Next step guides
• Schemes of work
• Specimen papers
• Syllabuses
• Teacher guides
Support
for Cambridge
International
AS A Level
Sign up for email notifications about changes to syllabuses, including new and revised products and services
at www.cambridgeinternational.org/syllabusupdates
Professional development
We support teachers through:
• Introductory Training – face-to-face or online
• Extension Training – face-to-face or online
• Enrichment Professional Development – face-to-face or online
Find out more at www.cambridgeinternational.org/events
• Cambridge Professional Development Qualifications
Find out more at www.cambridgeinternational.org/profdev
Supporting exams officers
We provide comprehensive support and guidance for all Cambridge exams officers. Find out more at:
www.cambridgeinternational.org/eoguide

Cambridge International AS A Level Geography 9696 syllabus. Syllabus overview
9
1 Syllabus overview
1.1 Content
Candidates for Cambridge International AS Level Geography study the following topics:
Core Physical Geography
Hydrology and fluvial geomorphology
Atmosphere and weather
Rocks and weathering
Core Human Geography
Population
Migration
Settlement dynamics
Candidates for Cambridge International A Level Geography study the AS Level topics
and two options from:
Advanced Physical Geography Options
Tropical environments
Coastal environments
Hazardous environments
Hot arid and semi-arid environments
and two options from:
Advanced Human Geography Options
Production, location and change
Environmental management
Global interdependence
Economic transition

1.2 Assessment
For Cambridge International AS and A Level Geography, candidates:
• take Papers 1 and 2 only (for the Cambridge International AS Level qualification)
or
• follow a staged assessment route by taking Papers 1 and 2 (for the Cambridge International AS Level
qualification) in one series, then Paper 3 and 4 (for the Cambridge International A Level qualification) in a
later series
or
• take Papers 1, 2, 3 and 4 in the same examination series, leading to the full Cambridge International
A Level.
All components will be externally assessed.
Component
Weighting
AS Level A Level
Paper 1
Core Physical Geography 1 hour 30 minutes
Section A: Three data response questions (30 marks)
Section B: One structured question from a choice of three (30 marks)
60 marks
50% 25%
Paper 2
Core Human Geography 1 hour 30 minutes
Section A: Three data response questions (30 marks)
Section B: One structured question from a choice of three (30 marks)
60 marks
50% 25%
Paper 3
Advanced Physical Geography Options 1 hour 30 minutes
Candidates answer questions on two of the optional topics.
Each topic consists of one structured question (10 marks) and a choice
of essay questions (20 marks).
60 marks
– 25%
Paper 4
Advanced Human Geography Options 1 hour 30 minutes
Candidates answer questions on two of the optional topics.
Each topic consists of one structured question (10 marks) and a choice
of essay questions (20 marks).
60 marks
– 25%

11
Availability
This syllabus is examined in the June and November examination series.
This syllabus is available to private candidates.
Detailed timetables are available from www.cambridgeinternational.org/timetables
Centres in the UK that receive government funding are advised to consult the Cambridge International
website www.cambridgeinternational.org for the latest information before beginning to teach this
syllabus.
Combining this with other syllabuses
Candidates can combine this syllabus in an examination series with any other Cambridge International
syllabus, except:
• syllabuses with the same title at the same level.

Cambridge International AS A Level Geography 9696 syllabus. Syllabus aims and assessment objectives
2 Syllabus aims and assessment objectives
Geography occupies a central position in understanding and interpreting issues affecting people, places
and environments, and change in space and time. This syllabus encourages learners to understand
contemporary issues and the complexity of environmental systems. Learners gain an understanding of
the impacts of human activity on environments and how these impacts can be managed sustainably. This
syllabus emphasises studying real examples and case studies to show the diversity and interdependence of
physical and human environments.
2.1 Syllabus aims
The aims of this syllabus describe the educational purposes of a course in Geography at AS and A Level.
These aims are not intended as assessment criteria but outline the educational context in which the syllabus
content should be viewed. Some of these aims may be delivered by the use of suitable case studies,
through application of geographical skills, or through practical fieldwork.
The syllabus aims to enable candidates to:
• develop awareness of the relevance of geography to understanding and solving contemporary
environmental problems
• understand the main elements of physical geography and human geography and the interdependence
between them
• understand the processes operating at different scales within physical and human environments
• develop a sense of space, place and location
• explain the causes and effects of change over space and time on physical and human environments
• understand the importance of scale in studying geography
• develop an appreciation of the nature, value, limitations and importance of different approaches to
analysis and explanation in geography
• increase knowledge of, and ability to use and apply, appropriate skills and techniques including fieldwork
• develop a concern for accuracy and objectivity in collecting, recording, processing, presenting, analysing
and interpreting geographical data
• develop the ability to interpret and evaluate different sources and types of information
• develop a logical approach in order to present a structured, coherent and evidence-based argument.

13
2.2 Assessment objectives
AO1: Knowledge
Candidates should:
1.1 give definitions and explanations of relevant geographical terms and concepts
1.2 show working knowledge of relevant principles, theories and models
1.3 recall accurately the location and character of places and environments
1.4 show knowledge of physical and human processes and factors.
AO2: Understanding and application
Candidates should:
2.1 understand the complex and interactive nature of physical and human environments
2.2 understand how processes bring changes in systems, distributions and environments
2.3 recognise the significance of the similarities and differences between places, environments and people
2.4 recognise the significance of spatial scale and time scale
2.5 apply geographical knowledge and understanding to unfamiliar contexts.
AO3: Skills
Candidates should:
3.1 interpret a variety of types of geographical data and sources and recognise their limitations
3.2 use geographical data to identify trends and patterns
3.3 use diagrams and sketch maps to illustrate geographical features
3.4 demonstrate skills of analysis and synthesis of geographical information
3.5 communicate geographical evidence, ideas and arguments.
AO4: Evaluation
Candidates should:
4.1 assess the effects of geographical processes and change on physical and human environments
4.2 evaluate the relative success or failure of initiatives
4.3 assess how the viewpoints of different groups of people, potential conflicts of interest and other factors
interact in the management of physical and human environments
4.4 critically evaluate geographical principles, theories and models.

2.3 Relationship between assessment objectives and components
The approximate weightings allocated to each of the assessment objectives (AOs) are summarised below.
The table shows the assessment objectives (AO) as a percentage of each component.
Component
AO1
%
AO2
%
AO3
%
AO4
%
Paper 1 Core Physical Geography 30 30 28 12
Paper 2 Core Human Geography 30 30 28 12
Paper 3 Advanced Physical Geography Options 20 20 20 40
Paper 4 Advanced Human Geography Options 20 20 20 40
2.4
Relationship between assessment objectives and qualifications
The approximate weightings allocated to each of the assessment objectives are summarised below.
The table shows the assessment objectives (AO) as a percentage of each qualification.
Assessment objective
Weighting in
AS Level
%
Weighting in
A Level
%
AO1: Knowledge 30 25
AO2: Understanding and application 30 25
AO3: Skills 28 24
AO4: Evaluation 12 26

15
2.5 Geographical skills
Through studying the syllabus content, candidates will be expected to have used and developed the
following geographical skills:
• An understanding of the nature and use of different types of geographical information, both quantitative
and qualitative, and understanding of their limitations.
• An ability to use and interpret a variety of geographical information in order to identify, describe and
explain geographical trends and patterns.
• An ability to interpret and evaluate information and produce reasoned conclusions.
Teachers are expected to identify suitable opportunities to embed geographical skills and practical work
throughout the course. This approach will not only provide opportunities for developing skill in using and
interpreting geographical data but will increase the appeal of the course, and the enjoyment of the subject.
Practical work helps learners to acquire a secure understanding of the syllabus topics and to appreciate the
interdependent nature of physical and human systems.
It is expected that candidates will be able to extract specified geographical information from the resources
listed in 2.6.
Geography fieldwork
Geography by its nature is a practical subject. Wherever possible, learners should pursue a fully integrated
course which allows them to develop their practical skills by carrying out fieldwork and geographical
investigations within the Core geography topics and Advanced geography options chosen for study.
It may not always be possible to do fieldwork but some practical experience, however limited, is desirable in
preparation for further study of geography.

2.6
Resources, examples and case studies
Some questions in all components are resource based. Resource materials come from various areas
of the world in order to match the aims of an international syllabus and examination. The resources
used in questions do not require specific regional knowledge and are designed to prompt candidates to
demonstrate geographical skills and apply the principles, theories and concepts they have studied.
The following list shows the types of resource materials that candidates should be confident in handling and
that might be used in examination papers.
Resource type Detail
Maps Survey map extracts (1:25 000 and 1:50 000 scale), thematic maps, distribution
maps (flow line, isoline, desire line, dot, proportional symbols and choropleth), and
sketch maps.
Photographs Colour photographs, black and white photographs, aerial photographs, terrestrial
photographs, and satellite images.
Diagrams and
graphs
Bar graphs, divided bar graphs, line graphs, scatter graphs (including line of best fit),
log-log and log-normal graphs, pie charts, proportional circles, dispersion graphs,
triangular graphs, climate graphs, age/sex structure diagrams, 2D and 3D diagrams,
flow diagrams, cartoons, and diagrams with and without annotation.
Written Extracts from newspapers, articles, and advertisements.
Numeric Data tables.
As an International AS and A Level, the units used in all resources and examinations will be metres (m)
and kilometres (km) for height and distance, degrees Celsius (°C) for temperature and US dollars (US$) for
economic data.
Examples and case studies
In all components, candidates will be expected to support their answers with reference to examples and
case studies at different scales (local, regional, national and international) from a variety of places.
Where relevant, examples should include material from places at different levels of development.
The syllabus gives teachers the opportunity to select their own case studies to illustrate the content. Where
possible, case studies should be dated no earlier than 1980. Case studies from within the lifetime of the
student are likely to be the most relevant and engaging.
Case studies should be real, rather than theoretical, to allow candidates opportunity to examine the conflicts
of interest and viewpoints of different groups of people affected by the geographical environment, initiative
or hazard being studied. Where possible there should be opportunity for candidates to assess the relative
success or failure of initiatives.
Case studies give excellent opportunities for introducing candidates to a wide variety of resource material.

Cambridge International AS A Level Geography 9696 syllabus. Syllabus content
17
3 Syllabus content
This syllabus gives you the flexibility to design a course that will interest, challenge and engage your
learners. Where appropriate you are responsible for selecting resources and examples to support your
learners’ study. These should be appropriate for the learners’ age, cultural background and learning context
as well as complying with your school policies and local legal requirements.
Candidates must study the following three topics.
Where appropriate, candidates should study examples drawn from a variety of environments. For further
information on the use of examples and case studies see 2.6.
1. Hydrology and fluvial geomorphology
1.1 The drainage basin system
Outputs: evaporation, evapotranspiration and river discharge.
Stores: interception, soil water, surface water, ground water, and channel storage.
Flows:
above ground – throughfall, stemflow, overland flow, and channel flow.
below ground – infiltration, percolation, throughflow, groundwater, and baseflow.
Underground water: water tables, ground water, recharge, and springs.
1.2 Discharge relationships within drainage basins
Components of hydrographs (storm and annual).
Influences on hydrographs.
Climate: precipitation type and intensity, temperature, evaporation, transpiration, evapotranspiration,
and antecedent moisture.

Drainage basin characteristics: size and shape, drainage density, porosity and permeability of soils,
rock type, slopes, vegetation type, and land use.
1.3 River channel processes and landforms
Channel processes
Erosion: abrasion/corrasion, solution, cavitation, and hydraulic action.
Load transport: traction, saltation, suspension, and solution.
Deposition and sedimentation: the Hjülstrom curve.
River flow: velocity and discharge, patterns of flow (laminar, turbulent and helicoidal), and thalweg.
Channel types: straight, braided, and meandering.
Landforms: meander (river cliffs, point bars, oxbow lakes), riffle and pool sequences, waterfalls,
gorges, bluffs, floodplains, levées, and deltas.
1.4 The human impact
Modifications to catchment flows and stores and to channel flows by land-use changes
(deforestation, afforestation, urbanisation), abstraction and water storage.
The causes and impacts of river floods; prediction of flood risk and recurrence intervals.
The prevention and amelioration of river floods to include:
• forecasts and warnings
• hard engineering – dams, straightening, levées and diversion spillways
•
soft engineering – floodplain and drainage basin management, wetland and river bank
conservation and river restoration.
Case study: candidates must study a recent river flood event showing the causes of the flood,
impacts on both people and the environment, and evaluate attempts to reduce the impact of the
flood.

2. Atmosphere and weather
2.1 Diurnal energy budgets
Factors affecting diurnal energy budget: incoming (shortwave) solar radiation, reflected solar
radiation, energy absorbed into the surface and subsurface, albedo, sensible heat transfer,
longwave radiation, latent heat transfer – evaporation, dew and absorbed energy returned to earth.
2.2 The global energy budget
The latitudinal pattern of radiation: excesses and deficits.
Atmospheric transfers: wind belts and ocean currents.
Seasonal variations in temperature, pressure and wind belts: the influence of latitude, land/sea
distribution, and ocean currents.
2.3 Weather processes and phenomena

Atmospheric moisture processes: evaporation, condensation, freezing, melting, deposition, and
sublimation.
Causes of precipitation: convection, frontal and orographic uplift of air, and radiation cooling.
Types of precipitation: clouds, rain, hail, snow, dew, and fog.
The enhanced greenhouse effect and global warming: the evidence, possible causes and
atmospheric impacts.
Case study: candidates must study an urban area which shows the effects of human activity on
climate: temperature (heat island), humidity, precipitation and winds.
3. Rocks and weathering
3.1 Plate tectonics
Nature of tectonic plates and their global patterns.
Types of plate boundaries: divergent (constructive), conservative and convergent (destructive).
Processes and associated landforms: sea floor spreading, subduction, fold mountain building, ocean
ridges, ocean trenches, and volcanic island arcs.
3.2 Weathering
Physical (mechanical) weathering processes: freeze-thaw, heating/cooling, salt crystal growth,
pressure release (dilatation), and vegetation root action.
Chemical weathering processes: hydrolysis, hydration, and carbonation.
General factors affecting the type and rate of weathering: climate, rock type, rock structure,
vegetation, and relief.
Specific factors affecting the type and rate of weathering: temperature and rainfall (Peltier diagram).
3.3 Slope processes
Slope processes, conditions under which each occurs and effects on slopes.
Mass movement: heaves, flows, slides, and falls.
Water and sediment movement on slopes: rainsplash and surface runoff (sheetwash and rills).
The impact of human activities on the stability of slopes: increasing stability and decreasing stability.
Strategies to modify slopes to reduce mass movements: pinning, netting, grading and afforestation.
Case study: candidates must study the impacts of human activity on slopes showing the effect on
the stability of the slope, and evaluate attempts to reduce mass movement.

19
Candidates must study the following three topics.
Where appropriate, candidates should study examples and case studies drawn from low income countries
(LICs), middle income countries (MICs) and high income countries (HICs). For further information on the use
of examples and case studies see 2.6.
4. Population
4.1 Natural increase as a component of population change
Natural increase rate, birth rate and death rate, fertility rate, and infant mortality rate.
Factors (social, economic, environmental and political) affecting levels of fertility and mortality.
The interpretation of age/sex structure diagrams.
Population structure (age, gender, dependency, and dependency ratio).
4.2 Demographic transition
Changes in birth rate and death rate over time.
A critical appreciation of the demographic transition model, Stages 1–5.
Issues of youthful populations and ageing populations.
Links between population and development: changes in infant mortality rate and life expectancy over
time.
4.3 Population–resource relationships
The concept of food security. Causes and consequences of food shortages.
The roles of technology and innovation in development of food production. The role of constraints
(e.g. war, climatic hazards) in relation to sustaining population.
The concept of carrying capacity.
Candidates should be able to critically evaluate the concept of optimum population including
overpopulation and underpopulation.
4.4 The management of natural increase
Case study: candidates must study one country’s population policy regarding natural increase,
showing the difficulties faced and evaluate the attempted solution(s). (The case study must include
attempts to alter the natural increase rate and to manage the results of population change.)

5. Migration
5.1 Migration as a component of population change
Movements of populations (excluding all movements of less than one year’s duration).
Causes of migration: push factors and pull factors, processes of migration (including chain migration)
and patterns of migration (including by distance and by age), the role of constraints, obstacles and
barriers (e.g. cost, national borders).
5.2 Internal migration (within a country)
Rural–urban and urban–rural movements: their causes and impacts on source areas and
receiving/destination areas including population structures.
Stepped migration within the settlement hierarchy and urban–urban movements.
Causes and impacts of intra-urban movements (within urban settlements).
5.3 International migration
Voluntary and forced (involuntary) movements.
Causes and patterns of international migrations (including economic migration and refugee flows)
and impacts on source areas and receiving/destination areas.
5.4 The management of international migration
Case study: candidates must study one international migration stream: its causes, character, scale,
pattern and impacts on source areas and receiving/destination areas.
6. Settlement dynamics
6.1 Changes in rural settlements
Contemporary issues in rural settlements in LICs, MICs and HICs, (e.g. depopulation, service
provision) including the impacts of internal migration and the consequences of urban growth.
Case study: candidates must study a rural settlement (village or hamlet) or a rural area showing
some of the issues of its development and growth (or decline) and evaluating the responses to
these issues.
6.2 Urban trends and issues of urbanisation
Urban growth. The process of urbanisation and its causes and consequences in LICs, MICs and
HICs, including counterurbanisation and re-urbanisation, competition for land and urban renewal.
The concept of a world city: causes of the growth of world cities and the development of a hierarchy
of world cities.
6.3 The changing structure of urban settlements
Factors (social, economic, environmental and political) affecting the location of activities within
urban areas (including planning) and how urban locations change over time for retailing, services and
manufacturing.
The changing central business district (CBD).
Competition for space (spatial competition) in urban areas, the concept of bid rent, and functional
zonation.
Residential segregation: causes (income and race/ethnicity) and processes (e.g. operation of the
housing market, influence of family and friends, culture and planning).
6.4 The management of urban settlements
Case study: candidates must study urban settlements showing the challenges of, and evaluating
the attempted solutions in, each of the following:
• a shanty town (squatter settlement) in an LIC or MIC
• providing infrastructure (either power or transport) for a city.

21
Candidates must study two of the following advanced physical geography options.
Where appropriate, candidates should study examples drawn from a variety of environments. For further
information on the use of examples and case studies see 2.6.
7. Tropical environments
7.1 Tropical climates
Global distribution and climatic characteristics of humid tropical and seasonally humid tropical
environments: the roles of the intertropical convergence zone (ITCZ), subtropical anticyclones, and
monsoons.
The key features of temperature and rainfall and their annual and diurnal variations in the humid
tropical and seasonally humid tropical environments.
7.2 Landforms of tropical environments
The formation of characteristic landforms:
granite: (deep weathering profiles) tors, inselbergs, and bornhardts
limestone: tropical karst (cone karst, tower karst, and cockpit karst).
7.3 Humid tropical (rainforest) ecosystems and seasonally humid tropical (savanna) ecosystems
Plant communities: development of climax, subclimax and plagioclimax.
Vegetation characteristics.
Nutrient cycling: Gersmehl diagrams, soil fertility, energy flows, and trophic levels.
Soil formation: soil forming processes, soil types and profile characteristics (oxisols/latosols,
tropical red and brown earths).
7.4 Sustainable management of tropical environments
Case study: candidates must study some of the threats to (exploitation) and problems of sustainable
management of areas within either the rainforest ecosystem or the savanna ecosystem and
evaluate attempted solutions.

8. Coastal environments
8.1 Coastal processes
Wave generation and characteristics: fetch, energy, refraction, breaking waves, high and low energy
waves, swash, and backwash.
Marine erosion: hydraulic action, cavitation, corrasion/abrasion, solution, and attrition.
Sub-aerial processes: weathering and mass movement.
Marine transportation and deposition: sediment sources and characteristics, sediment cells, and
longshore drift.
8.2 Characteristics and formation of coastal landforms
Erosional landforms: cliffs and wave-cut platforms, caves, arches and stacks.
Depositional landforms: beaches in cross section (profile) and plan, swash and drift aligned
beaches, simple and compound spits, tombolos, offshore bars, barrier beaches, coastal dunes, tidal
sedimentation in estuaries, coastal saltmarshes, and mangroves.
The role of sea level change in the formation of coastal landforms.
8.3 Coral reefs
Characteristics, distribution and formation of fringing reefs, barrier reefs, and atolls.
Conditions required for coral growth.
Threats to coral reefs (global warming, sea-level rise, pollution, physical damage) and possible
management strategies.
8.4 Sustainable management of coasts
Case study: candidates must study some of the problems of sustainably managing a stretch
or stretches of coastline, and evaluate attempted solutions (including hard engineering and soft
engineering).

23
9. Hazardous environments
9.1 Hazards resulting from tectonic processes
The global distribution of earthquakes and volcanoes related to plate tectonics.
Earthquakes and resultant hazards: shaking, landslides, soil liquefaction, and tsunami.
Volcanoes and resultant hazards: types of eruption and their products (nuées ardentes, lava flows,
volcanic mudflows/lahars, volcanic landslides, pyroclastic flows, and ash fallout).
Primary and secondary impacts on lives and property.
Prediction, hazard mapping, preparedness and monitoring of earthquake and volcanic hazards and
perception of risk.
9.2 Hazards resulting from mass movements
Mass movements and resultant hazards: nature and causes.
Impacts on lives and property.
Prediction, hazard mapping, preparedness and monitoring of the hazard and the perception of risk.
9.3 Hazards resulting from atmospheric disturbances
Global distribution of areas most at risk from large scale tropical disturbances (cyclones, hurricanes,
typhoons) and small scale atmospheric disturbances (tornadoes).
Processes causing the formation and development of cyclones, hurricanes, typhoons and tornadoes.
Hazards from large scale atmospheric disturbances: storm surges, coastal flooding, intense rainfall
leading to severe river floods and mass movement, and high winds.
Hazards from small scale atmospheric disturbances: intense precipitation (rain and hail), high winds,
and pressure imbalances.
Primary and secondary impacts on lives and property.
Prediction, preparedness and monitoring of large and small scale atmospheric disturbances and
perception of risk.
9.4 Sustainable management in hazardous environments
Case study: candidates must study some of the problems of sustainable management of a
hazardous environment and evaluate attempted or possible solutions.

10. Hot arid and semi-arid environments
10.1 Hot arid and semi-arid climates
Global distribution and climatic characteristics of hot arid and semi-arid environments.
Definitions and causes of aridity: pressure and wind systems, influence of ocean currents, rain
shadow effect.
The key features of hot arid and semi-arid environments: high wind energy environments, diurnal
and seasonal variations in precipitation and temperature.
10.2 Landforms of hot arid and semi-arid environments
Weathering processes: thermal fracture, exfoliation, salt weathering, chemical weathering, and their
effects.
Processes of erosion, transport and deposition by wind: corrasion/abrasion, deflation, traction,
saltation, and suspension.
Erosion, transport and deposition by water action: hydrological regime, episodic rainfall, sheet and
flash floods.
Characteristic landforms: sand dunes, wind sculptured rocks (yardang, zeugen), wadis, alluvial fans,
arroyos, pediments, and piedmont zone (bahadas, playas, salt lakes, inselbergs).
Relative roles of aeolian and fluvial processes: evidence for past climate change (Pleistocene
pluvials), and the role of past processes in the development of landforms.
10.3 Soils and vegetation
Vegetation: biomass productivity (biodiversity, limited nutrient cycling, fragility), adaptation of plants
to extreme temperatures, physical and physiological drought.
Soils processes: upward capillary movement of water and minerals (salinisation).
The process of desertification (both natural and human factors) leading to the degradation of soils
and vegetation in semi-arid environments.
10.4 Sustainable management of hot arid and semi-arid environments
Case study: candidates must study the problems of sustainable management in either a hot arid or
a semi-arid environment and evaluate attempted or possible solutions.

25
Candidates must study two of the following advanced human geography options.
Where appropriate, candidates should study examples and case studies drawn from low income countries
(LICs), middle income countries (MICs) and high income countries (HICs). For further information on the use
of examples and case studies see 2.6.
11. Production, location and change
11.1 Agricultural systems and food production
Factors (physical, social, economic, political) affecting agricultural land use and practices on farms:
the roles of irrigation, land tenure, the nature of demand and distance from markets, and agricultural
technology.
The concept of an agricultural system with inputs, throughputs, subsystems and output: one arable
system and one pastoral system.
Intensive and extensive production and agricultural productivity.
Issues in the intensification of agriculture and the extension of cultivation.
11.2 The management of agricultural change
Case study: candidates must study the need for, and some of the difficulties in, the management
of agricultural change in one country, at the local scale (the farm, holding or producer) and at the
national scale, and evaluate the attempted solutions.
11.3 Manufacturing and related service industry
Factors affecting the location of manufacturing and related service industry (land, labour, capital,
markets, materials, technology, economies and diseconomies of scale, inertia, transport,
government policies).
Industrial agglomeration, functional linkages, the industrial estate and the export processing zone
(EPZ).
The informal sector of manufacturing and services: causes, characteristics, location and impact.
11.4 The management of change in manufacturing industry
Case study: candidates must study the industrial policy for one country’s manufacturing and
consequent changes in the character, location and organisation of its manufacturing, showing some
of the issues faced and evaluate the attempted solutions.

12. Environmental management
12.1 Sustainable energy supplies
Renewable and non-renewable energy resources.
Factors at the national scale affecting demand for and supply of energy and the balance between
different sources (including sustainability, levels of development, resource endowment, climate,
income, technology, pollution, energy policy and energy security).
Trends in the consumption of fossil fuels, nuclear power and renewables (hydroelectric power (HEP),
wind, biofuels) in LICs, MICs and HICs.
The environmental impacts of energy production, transport and usage at local and global scales.
12.2 The management of energy supply
Case study: candidates must study one country’s overall electrical energy strategy showing some of
the issues of changes in demand for and supply of electricity, in power production and its location,
and evaluate the success of the overall strategy.
Case study: candidates must study one named located scheme to produce electricity (e.g. a power
station), showing some of the issues of changes in demand and supply, in power production and its
location, and evaluate the success of the scheme.
12.3 Environmental degradation
Pollution (land, air and water): nature, causes, solutions.
Demand for and supply of water and issues of water quality.
Factors in the degradation of rural environments (e.g. overpopulation, poor agricultural practices,
deforestation).
Factors in the degradation of urban environments (e.g. urbanisation, industrial development,
inadequate waste management).
Constraints on improving the quality of degraded environments.
The protection of environments at risk at the local or regional scale: needs, measures and outcomes.
12.4 The management of a degraded environment
Case study: candidates must study one degraded environment, showing the causes of its
degradation, problems faced, issues in attempts to improve the environment and evaluate the
attempted solutions.

27
13. Global interdependence
13.1 Trade flows and trading patterns
Visible and invisible imports and exports. Global patterns of, and inequalities in, trade flows.
Factors affecting global trade (including resource endowment, locational advantage, historical factors
such as colonial ties, trade agreements and changes in the global market).
The role of the World Trade Organization (WTO) and free trade. Candidates should be able to
critically evaluate the impacts of trade on exporting and importing countries.
The nature and role of Fairtrade.
13.2 International debt and international aid
The causes, nature and problems of debt for countries. The international debt crisis and debt relief.
Different types of international aid and aid donors: relief aid, development aid, tied aid, bilateral aid
and multilateral aid.
Candidates should be able to critically evaluate the impacts of international aid on receiving
countries.
13.3 The development of international tourism
Reasons for, and trends in, the growth of international tourism.
The impacts of tourism on the environments, societies and economies (local and national) of tourist
destinations.
Carrying capacity and the tourism multiplier effect.
Recent developments in different types of tourism (including ecotourism).
Candidates should be able to critically evaluate the life cycle model of tourism.
13.4 The management of a tourist destination
Case study: candidates must study one tourist area or resort, its growth and development, showing
the issues of sustainability it faces and evaluating the impacts of tourism on the destination’s
environment(s), society and economy.

14. Economic transition
14.1 National development
The nature of the primary, secondary, tertiary and quaternary sectors and their roles in economic
development.
The nature, causes (physical and human) and distribution of global inequalities in social and
economic wellbeing.
Candidates should be able to critically evaluate some of the measures and indices of social and
economic inequality.
14.2 The globalisation of economic activity
An introduction to global patterns of resources, production and markets.
Foreign direct investment (FDI) and the new international division of labour (NIDL). Factors affecting
the growth and spatial structure of transnational corporations (TNCs).
Case study: candidates must study the global spatial organisation and operation of one TNC.
Factors in the emergence and growth of newly industrialised countries (NICs). Changes in the
location of economic activity (e.g. outsourcing of manufacturing and offshoring of services): nature,
causes and impacts.
14.3 Regional development within countries
Regional disparities in social and economic development.
The concept of core–periphery.
The process of cumulative causation from initial advantage(s), spread and backwash effects, regional
divergence and convergence.
14.4 The management of regional development
Case study: candidates must study one country’s regional development policy, its regional
disparities, some of the difficulties faced in trying to overcome these disparities and evaluate the
attempted solutions.

Cambridge International AS A Level Geography 9696 syllabus. Description of components
29
4 Description of components
Paper 1 forms 50 per cent of the AS qualification and 25 per cent of the A Level qualification.
Paper 1 is 1 hour 30 minutes in duration and is worth 60 marks.
Section A consists of three compulsory questions, each worth 10 marks. Each question will require
interpretation of a geographical resource.
Section B consists of three structured questions, one on each core topic. Candidates must answer one
question. Each question is worth 30 marks. Questions give an opportunity for extended writing.
Candidates are expected to use and interpret a variety of resources and may be asked to draw and label
appropriate diagrams and/or sketch maps to support their work and to integrate these into their responses.
This component covers three foundational topics in physical geography:
•
Hydrology and fluvial geomorphology
•
Atmosphere and weather
•
Rocks and weathering
It provides an introduction to, and background for, progression to Paper 3 Advanced Physical Geography
Options, as knowledge and understanding of rivers, weather and climate, and the earth are fundamental to
further study of physical geography.
Through studying these topics, candidates will be expected to have developed the following skills:
and qualitative, and an understanding of their limitations.
• An ability to present a structured, coherent and evidence-based argument.
These skills provide a solid foundation for progression to Paper 3 and for further study.

Paper 2 forms 50 per cent of the AS qualification and 25 per cent of the A Level qualification.
Section A consists of three compulsory questions, each worth 10 marks. Each question will require
interpretation of a geographical resource.
Section B consists of three structured questions, one on each core topic. Candidates must answer one
question. Each question is worth 30 marks. Questions give an opportunity for extended writing.
There are strong interrelationships between the three topics, so questions spanning two or more topics may
be set in both Sections A and B.
appropriate diagrams and/or sketch maps to support their work and to integrate these into their response.
This component covers three foundational topics in human geography:
• Population
• Migration
• Settlement dynamics
It provides an introduction to, and background for, progression to Paper 4 Advanced Human Geography
Options, as knowledge and understanding of people, their movements and where they live is fundamental
to further study of human geography.
Through studying these topics, candidates will be expected to have developed the following skills:
and qualitative, and an understanding of their limitations.
These skills provide a solid foundation for progression to Paper 4 and for further study.

31
Paper 3 forms 25 per cent of the A Level qualification.
Candidates must answer questions on two optional topics.
There will be three questions on each optional topic.
Each topic will consist of a structured question worth 10 marks, and two essay questions worth 20 marks
each. Candidates must answer the structured question and choose one of the two essay questions.
This component covers four optional topics covering different physical environments:
• Tropical environments
• Coastal environments
• Hazardous environments
•
Hot arid and semi-arid environments
Each option is substantial and builds on the study of Core Physical Geography.
Candidates study the processes and landforms with a focus on the sustainable management of the
environment based on a case study. The management element is synoptic, combining knowledge and
understanding of physical factors and human factors.
Through studying these topics, candidates will further develop the skills acquired in studying the core
physical geography topics.
Candidates will be expected to be able to show the following skills:
• An ability to draw on and apply their knowledge and understanding to construct their own explanations
and arguments.
• An ability to understand the role of place and interdependence in creating different outcomes, different
viewpoints and to make evaluations regarding the relative success or failure of initiatives.
These skills provide a solid foundation for progression to university.

Paper 4 forms 25 per cent of the A Level qualification.
Candidates must answer questions on two optional topics.
There will be three questions on each optional topic.
Each topic will consist of a structured question worth 10 marks, and two essay questions worth 20 marks
each. Candidates must answer the structured question and choose one of the two essay questions.
This component covers four optional topics covering different areas of human geography:
•
Production, location and change
• Environmental management
• Global interdependence
• Economic transition
Each option is substantial and builds on the study of Core Human Geography.
Each topic consists of interconnected areas of human geography with a focus on change and management
based on case studies. Each topic is synoptic, requiring knowledge and understanding of interconnected
social, economic, environmental and political factors.
Through studying these topics, candidates will further develop the skills acquired in studying the core
human geography topics.
Candidates will be expected to be able to show the following skills:
• An ability to draw on and apply their knowledge and understanding to construct their own explanations
and arguments.
• An ability to understand the role of place and interdependence in creating different outcomes, different
viewpoints and to make evaluations regarding the relative success or failure of initiatives.
These skills provide a solid foundation for progression to university.

Cambridge International AS A Level Geography 9696 syllabus. Glossary of command words
33
5 Glossary of command words
Command words are those words in a question that tell the candidate what they have to do. The glossary
has been deliberately kept brief with respect to the descriptions of meanings. Candidates should appreciate
that the meaning of a term must depend in part on its context.
This glossary is neither exhaustive nor definitive and should be used specifically with assessment for this
syllabus.
Command word What it means
Account Give reasons for
Assess Make an informed judgement based on evidence
Calculate Work out a numerical answer. In general, working should be shown,
especially where two or more steps are involved
Compare Describe both similarities and differences between things. Two separate
descriptions do not make a comparison
Contrast Describe differences between two things
Define State the precise meaning of a term, idea or concept
Describe State in words the key characteristics and give factual details
Discuss Present points for and against, or present different viewpoints
Draw Make a sketch or simple, freehand drawing. May be used with labels
Evaluate Make a judgement from available evidence
Examine Investigate closely (describe, explain, offer evidence and comment)
Explain Set out reasons, causes or purposes
Give Provide an answer from, or in relation to, a resource
Give the meaning of State the definition of a term, idea or concept
Give reasons Provide points of explanation
How Describe in what way(s) or by what means
How far do you agree Make an informed judgement, based on evidence
Identify Name or select one or more characteristics
Label Add specific names or details to a diagram, graph or map
Name Provide the appropriate name or term
Outline Set out the main characteristics, restricted to giving essentials, without
supporting details
State Give a concise answer expressed in clear terms
Suggest Apply knowledge and understanding to an unfamiliar situation where there is
no single correct answer
To what extent Form and express a judgement after examining evidence
What Provide specific information
Which Provide specific information
Why Explain the reason or purpose

Cambridge International AS A Level Geography 9696 syllabus. Other information
6 Other information
Equality and inclusion
We have taken great care in the preparation of this syllabus and assessment materials to avoid bias of any
kind. In our effort to comply with the UK Equality Act (2010), we have taken all reasonable steps to avoid
direct and indirect discrimination.
The standard assessment arrangements may present barriers for candidates with impairments. Where a
candidate is eligible, we may be able to make arrangements to enable that candidate to access assessments
and receive recognition of their attainment. We do not agree access arrangements if they give candidates
an unfair advantage over others or if they compromise the standards being assessed. Candidates who are
unable to access the assessment of any component may be eligible to receive an award based on the parts
of the assessment they have taken.
Information on access arrangements is in the Cambridge Handbook at
www.cambridgeinternational.org/eoguide
Language
This syllabus and the associated assessment materials are available in English only.
Making entries
Exams officers are responsible for submitting entries to Cambridge International. We encourage them to
work closely with you to make sure they enter the right number of candidates for the right combination of
syllabus components. Entry option codes and instructions for submitting entries are in the Cambridge Guide
to Making Entries. Your exams officer has a copy of this guide.
Exam administration
To keep our exams secure, we produce question papers for different areas of the world, known as
administrative zones. We allocate all Cambridge schools to one administrative zone determined by their
location. Each zone has a specific timetable. Some of our syllabuses offer candidates different assessment
options. An entry option code is used to identify the components the candidate will take relevant to the
administrative zone and the available assessment options.

35
Retakes
Candidates can retake Cambridge International AS Level and Cambridge International A Level as many times
as they want to. Cambridge International AS A Levels are linear qualifications. Candidates must enter for
an option that leads to certification. To confirm what entry options are available for this syllabus, refer to the
Cambridge Guide to Making Entries for the relevant series.
Candidates can carry forward the result of their Cambridge International AS Level assessment from one
series to complete the Cambridge International A Level in a following series, subject to the rules and time
limits described in the Cambridge Handbook.
Grading and reporting
Cambridge International A Level results are shown by one of the grades A*, A, B, C, D or E, indicating
the standard achieved, A* being the highest and E the lowest. ‘Ungraded’ indicates that the candidate’s
performance fell short of the standard required for grade E. ‘Ungraded’ will be reported on the statement of
results but not on the certificate. The letters Q (pending) and X (no result) may also appear on the statement
of results but not on the certificate.
Cambridge International AS Level results are shown by one of the grades a, b, c, d or e, indicating the
standard achieved, ‘a’ being the highest and ‘e’ the lowest. ‘Ungraded’ indicates that the candidate’s
performance fell short of the standard required for grade ‘e’. ‘Ungraded’ will be reported on the statement
of results but not on the certificate. The letters Q (pending) and X (no result) may also appear on the
statement of results but not on the certificate.
If a candidate takes a Cambridge International A Level and fails to achieve grade E or higher, a Cambridge
International AS Level grade will be awarded if both of the following apply:
• the components taken for the Cambridge International A Level by the candidate in that series included
all the components making up a Cambridge International AS Level
• the candidate’s performance on the AS Level components was sufficient to merit the award of a
Cambridge International AS Level grade.

How students, teachers and higher education can use the grades
Cambridge International A Level
Assessment at Cambridge International A Level has two purposes:
• to measure learning and achievement
The assessment:

– confirms achievement and performance in relation to the knowledge, understanding and skills
specified in the syllabus, to the levels described in the grade descriptions.
• to show likely future success
The outcomes:

– help predict which students are well prepared for a particular course or career and/or which students
are more likely to be successful

– help students choose the most suitable course or career.
Cambridge International AS Level
Assessment at Cambridge International AS Level has two purposes:
• to measure learning and achievement
The assessment:

– confirms achievement and performance in relation to the knowledge, understanding and skills
specified in the syllabus.
• to show likely future success
The outcomes:

– help predict which students are well prepared for a particular course or career and/or which students
are more likely to be successful

– help students choose the most suitable course or career

– help decide whether students part way through a Cambridge International A Level course are
making enough progress to continue

– guide teaching and learning in the next stages of the Cambridge International A Level course.

Cambridge Assessment International Education
The Triangle Building, Shaftesbury Road, Cambridge, CB2 8EA, United Kingdom
Tel: +44 (0)1223 553554 Fax: +44 (0)1223 553558
Email: info@cambridgeinternational.org www.cambridgeinternational.org
Copyright © UCLES September 2020
‘While studying Cambridge IGCSE and Cambridge International A Levels, students broaden their
horizons through a global perspective and develop a lasting passion for learning.’
Zhai Xiaoning, Deputy Principal, The High School Affiliated to Renmin University of China

2023-2024-syllabus.pdf

More Related Content

Recently uploaded (20)

Featured (20)

2023-2024-syllabus.pdf