20563-38910-2-PB.pdf

International Journal of Informatics and Communication Technology (IJ-ICT)
Vol. 12, No. 2, August 2023, pp. 171~179
ISSN: 2252-8776, DOI: 10.11591/ijict.v12i2.pp171-179  171
Journal homepage: http://ijict.iaescore.com
Smart door access control system based on QR code
Agrim Jain1
, Abhinav Panwar1
, Mohd. Azam1
, Ruqaiya Khanam2,3
1
Department of Computer Sciences and Engineering, Sharda University, Greater Noida, India
2
Department of Electrical, Electronics, and Communication Engineering, Sharda University, Greater Noida, India
3
Center for Artificial Intelligence in Medicine, Imaging and Forensic, Sharda University, Greater Noida, India
Article Info ABSTRACT
Article history:
Received Jun 27, 2022
Revised Jul 23, 2022
Accepted Dec 30, 2022
Wirelessly based security applications have exploded as a result of modern
technology. To build and/or implement security access control systems,
many types of wireless communication technologies have been deployed.
quick response (QR code) is a contactless technology that is extensively
utilised in a variety of sectors, including access control, library book
tracking, supply chains, and tollgate systems, among others. This paper
combines QR code technology with Arduino and Python to construct an
automated QR code-based access management system. After detecting a QR
code, the QR scanner at the entry collects and compares the user's unique
identifier (UID) with the UID recorded in the system. The results show that
this system is capable of granting or denying access to a protected
environment in a timely, effective, and reliable way. Security systems can
protect physical and intellectual property by preventing unauthorized
persons from entering the area. Many door locks, such as mechanical and
electrical locks, were created to meet basic security needs but it also helps to
create a data ﬁles structure of the authorized persons.
Keywords:
Access control
Arduino
Automation
QR code
Sensors
Unique identifier
This is an open access article under the CC BY-SA license.
Corresponding Author:
Ruqaiya Khanam
Department of Electrical, Electronics, and Communication Engineering
Center for Artificial Intelligence in Medicine, Imaging and Forensic, Sharda University
Greater Noida, India
Email: dr.kruqaiya@gmail.com
1. INTRODUCTION
Numerous organizations have found that automated forced assimilation and accessing control
systems are critical in combating the security threats they encounter. This is a period when everything is
connected to the system, and everyone can access data from anywhere on the entire planet. As a result,
information hacking is a serious problem. Because of these risks, having some kind of personal identification
(ID) to have access to one's own personal information is essential. At various points within the guarded
space, various methods are introduced to track the individual’s activity and limit their access to private zone.
ID card and password techniques are the most regularly used standard individual ID systems.
An electric lock is a safe device that operates on electricity supply. Keyless entry electronic door locks
have lately become the most popular security options, with keyless electronic door locks being installed in many
households, workplaces, and academic institutions. The reliability with which authorized users may get
authorization to access the doors inside a secure system that incorporates an interactive interface, like using a
fingerprint or even a predefined passcode to enter it, is the system's key characteristic [1].
The biggest source of security risk is mechanical door lock keys, which are regularly lost,
duplicated, or stolen. To address the issue, keyless door lock systems were actually developed; however, the
system has significant software bugs. An attacker, for example, can enter the door by copying the access code

 ISSN: 2252-8776
Int J Inf & Commun Technol, Vol. 12, No. 2, August 2023: 171-179
172
or password. Furthermore, current radio frequency identification (RFID) based solutions are expensive and
complicated. As a result, the quick response (QR) scanner is seen to be the ideal technique because it is
considerably cheaper and easier to use than RFID [2]. Aside from that, extra security measures like the
monitoring system are necessary. The laboratory administrator will be unaware of what is going on in the
classroom or laboratory without a monitoring system. Aside from that, in high schools, classroom security
has become one of the most pressing concerns for many facilities departments. When lectures or instructors
are not present and learners are required to study on their own, the classroom activity must be supervised. To
avoid criminal behavior within the classroom, such as burglary and equipment abuse, it is vital to keep track
of who has access to the room at any one moment. A smart door system has been introduced to increase
security. As a result, the study's goal is to create a web-based security door for the university laboratory that
uses a QR code system, while also allowing an authorized user to monitor students' attendance. The
information storage system was created to track arrival and departure actions when accessing the security
door via the web-based website server. To evaluate the system's functionality, the number of students and
employees who entered the room during working hours was counted.
It's critical to secure the keyless door system to prevent intruders from entering the room without
being noticed by a person with authority. It is important to preventing any unfavorable situations, such as
classroom or laboratory equipment theft. According to Farooq et al. [3], a secure access control system based
on RFID has been devised, with the RFID tag serving as the access system. The system needs to merge RFID
technology with biometrics to perform the task. When the RFID scanner at the hostel's entry recognized the
RFID tag, the system took a picture of the person and searched the database for a match. If both the card and
the image obtained belong to the registered user, the entry door will be unlocked; otherwise, the system will
trigger the alarm and notify security via GSM modem to resolve the problem. The disadvantage of this
project is that while the RFID tag is lost, the cost of producing a new RFID tag is more, making it less cost-
effective [4]. Moreover, the RFID system frequently involves a costly scanning equipment that is originally
designed to scan and decode RFID tags. In way of comparison to RFID, the suggested QR code idea is far
more accessible and affordable, and it can be printed on any surfaces, whereas RFID requires specialist
coding to create the codes in the tag.
The QR system is simple to implement and has been used in a wide range of applications. In a
similar effort, the author developed a QR-based attendance management system for tracking students' daily
attendance [5]. The author contended that the QR implementation was user-friendly and cost-effective
because there was no paperwork needed. A unique QR code was provided to each parking place in a related
research by Rajesh et al. [6] with the purpose of immediately detecting the vehicle's placement to use a rapid
sort method. According to the article's author, most firms want to provide better, much more cost-effective
service, and the QR system is one of the best ways to do it. In addition to tracking the whereabouts of people
and items, the QR system has been used to convey personal and confidential information [7]. To establish a
secured QR code system for conveying personal information, the Rivest Shamir Adleman (RSA)
cryptographic technique was applied. This approach may be utilized in a number of real-world settings,
including the sharing of sensitive data. Above all, QR codes are popular due to their inexpensive cost, large
data capacity, ease of use, and speedy decoding [8].
The operation of the present door access systems available on the market is insufficient [9]–[12].
This is due to the high initial and ongoing costs of most automated door access systems on the market, which
most small businesses cannot afford. Small companies will prefer to take the risk of not having door access
systems since they cannot afford them [10], [13]. This is extremely unsafe and possibly dangerous since any
unauthorised individual can freely access and depart the company's premises.
2. RESEARCH METHOD
2.1. System components
The access control system is made up of three main components: an Arduino, a servo motor, and a
QR code reader. Other components are the light dependent resistor (LDR) and light emitting diode (LED).
Each component serves a certain purpose and has a secondary function.
2.1.1. Arduino board
Arduino is a non-proprietary project that enables the creation of computerized devices and
intelligent objects capable of detecting and controlling physical objects. Its UNO version is utilized here as a
relatively small scale controller device to evaluate the functioning of the proposed access control system
[14]–[21]. The accompanying Figure 1 shows a photographic image of the Arduino board.

Int J Inf & Commun Technol ISSN: 2252-8776 
Smart door access control system based on QR code (Agrim Jain)
173
Figure 1. Arduino board [9]
2.1.2. Servo motor
A servo controller is one of the most significant components of a control system and is commonly
utilized. Servo devices allow strong devices to be operated by signals from lower-level control devices. The
servo motor SG90 controls the movement of the door bar. The servomotor is supplied with power via an
external connection. All of the gears are made of metal. The working voltage is between 4.8 and 7.2 volts.
The accompanying Figure 2 shows a photographic image of the servo motor SG90, together with its
distinguishing component measurements [20].
Figure 2. Servo motor SG90 [16]
2.1.3. Quick response code
It is a machine-readable image that could be read instantly using a camera. A QR code is composed
of a succession of black squares and dots that indicate various sorts of data. The data is translated into a
human-readable format when you scan this code with your smartphone [17]–[23].
a. Develop QR codes with Python's qrcode command: a QR code, is a two-dimensional bar code with a
high readability and storage capacity. It is made out of black squares laid up in a square grid on a white
backdrop. For creating QR code graphics, Python includes a module called "qrcode." Pip may be used
to install it (pip install qrcode).
b. Approach:
- Import module
- Create Qrcode with qrcode. make () and it returns a PilImage object.
- Save into image
- Note: change name, system id and image name according to authenticate
- For example:
qr_code_maker.py > ...
import qrcode
img=qrcode.make("Name Agrim Jain, System ID 2020002047")
img.save("2020002047.jpg")

 ISSN: 2252-8776
174
Output shown in Figure 3 in the form of QR code image.
Figure 3. QR code
2.1.4. The light dependent resistor
The LDR is a resistor that is influenced by light. A LDR is a component having a variable resistance
that varies depending on the amount of light it receives. Figure 4 shows a typical LDR.
Figure 4. LDR [18]
2.1.5. Light emitting diode
A "LED" is a light-producing gadget. LED lighting gadgets emit up to 90% more light than
incandescent bulbs. What are their responsibilities? LEDs, which are tiny light sources, are activated by such
an electrical signal is received by a microprocessor, producing visible light. To avoid performance issues,
heat generated by LEDs is stored in a heat sink. An image of the LED is depicted photographically in
Figure 5. Figure 6 displays the whole circuit schematic for the Arduino-based door lock system project.
Figure 5. LED [19]

175
Figure 6. Proposed circuit diagram of door access system
2.2. Light emitting diode control by light dependent resistor
The LDR sensor is used to detect the quantity of light in the surroundings at the period and transmit
the data to the Arduino. In Figure 7, the data will be transformed into discrete values ranging from 0 to 1,023
(where 0 represents maximum darkness and 1,023 represents maximum brightness), and the output voltage
will be modified from 0 to 2.5 V/5 V (dim/high) by evaluating the receiver final value (0-2,023) towards the
threshold value. In complete darkness, if the received value is much less than the threshold, the output will be
2.5 V (during night). As a result, the LED will glow at half of its maximum brightness, and then when the
sun shines brightly (during day), the received value will be more than the threshold value, as well as the
output voltage will be higher.
Figure 7. Flow chart of the LED control by LDR
2.3. Door control by servo motor
The servo motor opens the door when the QR code is recognized as valid. The servo motor is turned
90 degrees left to pull the door bar vertically and provide access to the open door condition. After a few
seconds, the door closes automatically. In this example, the servo motor will turn 90 degrees towards the
right, and the door lowers to shut the opening. Figure 8 displays the functioning of a door controlled by a
servo motor SG90. A working prototype of a system is shown in Figure 9. It is to comprehend how a door
opening system operates as well as the connection between the system and the door opening system.

 ISSN: 2252-8776
176
Figure 8. Flow chart of the system operation of proposed system
Figure 9. Prototype design
3. RESULTS AND DISCUSSION
Our technology, which we created, may be used efficiently in colleges to track and monitor students'
attendance in a certain lecture room. It may also be utilized in office spaces to keep track of employees'
arrival times at their employment. Even though the system may be customized to any guarded zone that only
permits approved access, it is not limited to classrooms or office areas. A centralized database keeps track of
all entries, allowing each user's frequency of access to be calculated. This system contributes to the reduction
of technical human error as well as the manual paperwork connected with such restricted access. Figure 10
demonstrate prototype design of the proposed work.
Figure 10. System operation to get in for registered person

177
In Figure 10, this information is obtained from system about access time of registered persons of any
organization or class. The above window tells us all the information of entered person such as name, ID, date
and access time. In Figure 11, the system generated information is obtained from the system about exit time
of registered persons of any organization or class. In addition to that the above window gives us all the
information of exited person such as name, ID, date and exit time.
Figure 11. System operation to get out of registered person
Similarly, system will also generate all the information about entered person in order to retain time
in the particular department or office. In Figure 12, this window reflects all the information of the employee’s
or students about their stay details such as name, ID, access time, access date, exit time and exit date as well
using QR code. Most of the organizations have the similar type of system using RF card but in proposed
system we are operating this system using QR code which more handy and no need to carry extra card for
this purpose. Table 1 shows how much time a person spent their time in the organization. Although this table
is only for demonstration purpose so that one can understand how the system works on getting the QR
information from employee or student.
Figure 12. Proposed system operation with all information of a registered person
Table 1. Stay time of a person in the organization
S. No Name System ID Access time Exit time Stay time
1. Abhinav 2020002048 23:38:33 23:40:21 0:01:48
2. Azam 2020002045 23:38:46 23:40:34 0:01:48
3. Agrim 2020002047 23:39:00 23:40:47 0:01:47
Time format: hour-minute-second
4. CONCLUSION
This work has demonstrated development of smart door access control system based on QR code for
site security. The proposed security door system adopted a valid QR code to authenticate and/or deny entry to
a room or building. It is also used for creating data ﬁles structure of authorized users. By the help of door
system limited authorized users are able to enter. Control and transaction operations are handled by a
centralized system. The door unlocks and the check-in information, as well as basic information about the
user, is registered on the central server in real time since the user places the QR code in contact with the
scanner. Majority of organization are using RF card access but the proposed system will use QR code from
their mobile phones which would be handier and more comfortable without carring another device for that
purpose and economical too.
REFERENCES
[1] S. Morsalin, A. M. J. Islam, G. R. Rahat, S. R. H. Pidim, A. Rahman, and M. A. B. Siddiqe, “Machine-to-machine
communication based smart home security system by NFC, fingerprint, and PIR sensor with mobile android application,” in 2016
3rd International Conference on Electrical Engineering and Information Communication Technology (ICEEICT), Sep. 2016, pp.
1–6, doi: 10.1109/CEEICT.2016.7873048.
[2] J. Boschen, “Using QR codes in the classroom to enhance learning,” What I Have Learned, 2016.
https://whatihavelearnedteaching.com/using-qr-codes-in-the-classroom/ (accessed Jun. 20, 2022).

 ISSN: 2252-8776
178
[3] U. Farooq, M. ul Hasan, M. Amar, A. Hanif, and M. U. Asad, “RFID based security and access control system,” International
Journal of Engineering and Technology, vol. 6, no. 4, pp. 309–314, 2014, doi: 10.7763/IJET.2014.V6.718.
[4] D. He and S. Zeadally, “An analysis of RFID authentication schemes for internet of things in healthcare environment using
elliptic curve cryptography,” IEEE Internet of Things Journal, vol. 2, no. 1, pp. 72–83, Feb. 2015, doi:
10.1109/JIOT.2014.2360121.
[5] X. Wei, A. Manori, N. Devnath, N. Pasi, and V. Kumar, “QR code based smart attendance system,” International Journal of
Smart Business and Technology, vol. 5, no. 1, pp. 1–10, Mar. 2017, doi: 10.21742/ijsbt.2017.5.1.01.
[6] K. Rajesh, S. S. Waranalatha, K. V. M. Reddy, and M. Supraja, “QR code-based real time vehicle tracking in indoor parking
structures,” in 2018 Second International Conference on Intelligent Computing and Control Systems (ICICCS), Jun. 2018, pp. 11–
16, doi: 10.1109/ICCONS.2018.8663210.
[7] M. S. Ahamed and H. A. Mustafa, “A secure QR code system for sharing personal confidential information,” in 2019
International Conference on Computer, Communication, Chemical, Materials and Electronic Engineering (IC4ME2), Jul. 2019,
pp. 1–4, doi: 10.1109/IC4ME247184.2019.9036521.
[8] N. Hermanto, Nurfaizah, W. M. Baihaqi, and Sarmini, “Implementation of QR code and imei on android and web-based student
presence systems,” in 2018 3rd International Conference on Information Technology, Information System and Electrical
Engineering (ICITISEE), Nov. 2018, pp. 276–280, doi: 10.1109/ICITISEE.2018.8721009.
[9] A. Hadi, F. C. Yang, S. M. Kit, L. K. Sing, and M. Ikhwan, “Design and development of low cost auto gate system for house, part
4,” in 2nd Integrated Design Project Conference (IDPC), Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 2015,
pp. 1–10.
[10] K. P. Dipali, D. R. Roshani, C. P. Komal, and A. H. Marhaba, “Automatic gate opening system for Vehicles with RFID or
password,” International Journal of Electrical and Electronics Research, vol. 2, no. 2, pp. 35–41, 2014.
[11] J. A. Enokela and M. N. Tyowuah, “An electronically controlled automatic security access gate,” Leonardo Journal of Sciences,
no. 25, pp. 85–96, 2014.
[12] J. Cynthia, C. B. Priya, and P. A. Gopinath, “IoT based smart parking management system,” International Journal of Recent
Technology and Engineering (IJRTE), vol. 7, no. 4, pp. 374–379, 2018.
[13] S. J. Ganesh, A. Avenash, A. Prakashreddy, C. Baarathi, and S. H. H. Sudhan, “Electronic toll collection system using QR code
and RFID registration,” vol. 10, pp. 5–10, 2018.
[14] GT Wiki. https://www.geeetech.com/wiki/images/e/e6/ArduinoUnoSmd.jpg (accessed Jun. 20, 2022).
[15] M. M. R. Komol, A. K. Podder, M. N. Ali, and S. M. Ansary, “RFID and finger print based dual security system: A robust
secured control to access through door lock operation,” American Journal of Embedded Systems and Applications, vol. 6, no. 1,
pp. 15–22, 2018, doi: 10.11648/j.ajesa.20180601.13.
[16] https://rukminim2.flixcart.com/image/416/416/k4x2du80/electronic-hobby-kit/a/f/f/10-pcs-sg90-tower-pro-micro-servo-motor-
pack-of-10-super-debug-original-imafmpqbek7wfrpj.jpeg?q=70 (accessed Jun. 10, 2022).
[17] A. F. M. Fauzi, N. N. Mohamed, H. Hashim, and M. A. Saleh, “Development of web-based smart security door using QR code
system,” in 2020 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), Jun. 2020, pp. 13–17,
doi: 10.1109/I2CACIS49202.2020.9140200.
[18] https://m.media-amazon.com/images/I/31U4JA+4gVL.jpg (accessed Jun. 20, 2022).
[19] S. Kumari, “Light-emitting diode (LED),” MechoMotive, 2021. https://mechomotive.com/light-emitting-diode/ (accessed Jun. 20,
2022).
[20] G. Mehta, R. Khanam, and V. K. Yadav, “A novel IoT based smart energy meter for residential energy management in smart grid
infrastructure,” in 2021 8th International Conference on Signal Processing and Integrated Networks (SPIN), Aug. 2021, pp. 47–
52, doi: 10.1109/SPIN52536.2021.9566032.
[21] G. Mehta, Y. Mishra, U. Ashraf, S. Dubey, M. Singh, and R. Khanam, “Accident prevention using an auto braking system and
accident detection using internet of things,” in Smart Computing, London: CRC Press, 2021, pp. 142–148, doi:
10.1201/9781003167488-19.
[22] A. R. Normawati, I. Hisyamsani, and M. E. E. M. Matore, “Laboratory work assessment with QR code lab manual for
engineering science course among Polytechnic students,” Cypriot Journal of Educational Sciences, vol. 17, no. 3, pp. 798–811,
Mar. 2022, doi: 10.18844/cjes.v17i3.6905.
[23] Z. Deineko, N. Kraievska, and V. Lyashenko, “QR code as an element of educational activity,” International Journal of Academic
Information Systems Research (IJAISR), vol. 6, no. 4, pp. 26–31, 2022.
BIOGRAPHIES OF AUTHORS
Agrim Jain is a third-year engineering student at Sharda University in Greater
Noida, where he is studying information technology for his B.Tech degree. He has worked on
several projects based on Java and Python. His main research interests are related to human
interaction, cloud computing, database systems, app development, and privacy mechanisms in
the Internet of Things. He can be contacted at email: Agrimjain9717@gmail.com.

179
Abhinav Panwar is an engineering student currently pursuing his CSE course at
Sharda University, Greater Noida. He has completed his 12th from CBSE school in 2019 and
achieved 91.8%. Currently, he is 3rd year student and has made several projects on Java-
based language. He has also made a voice-based app for visually impaired person. He can be
contacted at email: abhinavpanwartanu@gmail.com.
Mohd. Azam the author of this paper, is an engineering student currently
pursuing his B.Tech. course (CSE) at Sharda University, Greater Noida. He is currently a
third-year student and has worked on several projects based on Java and Python. His primary
areas of interest in research include cloud computing, app development, and the Internet of
Things. He can be contacted at email: azammustaqueem@gmail.com.
Ruqaiya Khanam received the B.Tech degree in Electronics and
Communication from the University of Jamia Millia Islamia, Delhi, India in 1998 and
M.Tech degree in Electronic Circuit and System Design from Aligarh Muslim University,
Aligarh, India in 2004. She received the PhD degree in Electronics and Communication from
Jamia Millia Islamia, Delhi, India in 2014. She is with Electronics and Communication
Engineering Department, Sharda University, Greater Noida, India, where she is currently a
Professor. Her current research interests include VLSI design and technology, high level
designing using VHDL/Verilog, low power chip designing, image processing, biomedical
signal and image processing, fuzzy logic processor design, and internet of things. She can be
contacted at email: dr.kruqaiya@gmail.com.

20563-38910-2-PB.pdf

More Related Content

Similar to 20563-38910-2-PB.pdf

More from IjictTeam

Recently uploaded

20563-38910-2-PB.pdf